Marvell 88E6352 is mostly compatible to MV88E6123/61/65,
but requires indirect phy access. Also, its configuration
registers are a bit different.
Signed-off-by: Guenter Roeck <li...@roeck-us.net>
---
MAINTAINERS | 5 +
drivers/net/dsa/Kconfig | 8 +
drivers/net/dsa/Makefile | 3 +
drivers/net/dsa/mv88e6352.c | 464 ++++++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx.c | 3 +
drivers/net/dsa/mv88e6xxx.h | 7 +
6 files changed, 490 insertions(+)
create mode 100644 drivers/net/dsa/mv88e6352.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a20df9b..e48a05b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5845,6 +5845,11 @@ M: Russell King <rmk+ker...@arm.linux.org.uk>
S: Maintained
F: drivers/gpu/drm/armada/
+MARVELL 88E6352 DSA support
+M: Guenter Roeck <li...@roeck-us.net>
+S: Maintained
+F: drivers/net/dsa/mv88e6352.c
+
MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
M: Mirko Lindner <mlind...@marvell.com>
M: Stephen Hemminger <step...@networkplumber.org>
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 9234d80..0987c33 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -45,6 +45,14 @@ config NET_DSA_MV88E6171
This enables support for the Marvell 88E6171 ethernet switch
chip.
+config NET_DSA_MV88E6352
+ tristate "Marvell 88E6352 ethernet switch chip support"
+ select NET_DSA
+ select NET_DSA_MV88E6XXX
+ select NET_DSA_TAG_EDSA
+ ---help---
+ This enables support for the Marvell 88E6352 ethernet switch chip.
+
config NET_DSA_BCM_SF2
tristate "Broadcom Starfighter 2 Ethernet switch support"
depends on HAS_IOMEM
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index 23a90de..e2d51c4 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -7,6 +7,9 @@ endif
ifdef CONFIG_NET_DSA_MV88E6131
mv88e6xxx_drv-y += mv88e6131.o
endif
+ifdef CONFIG_NET_DSA_MV88E6352
+mv88e6xxx_drv-y += mv88e6352.o
+endif
ifdef CONFIG_NET_DSA_MV88E6171
mv88e6xxx_drv-y += mv88e6171.o
endif
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
new file mode 100644
index 0000000..43a5826
--- /dev/null
+++ b/drivers/net/dsa/mv88e6352.c
@@ -0,0 +1,464 @@
+/*
+ * net/dsa/mv88e6352.c - Marvell 88e6352 switch chip support
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ *
+ * Derived from mv88e6123_61_65.c
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static int mv88e6352_phy_wait(struct dsa_switch *ds)
+{
+ unsigned long timeout = jiffies + HZ / 10;
+
+ while (time_before(jiffies, timeout)) {
+ int ret;
+
+ ret = REG_READ(REG_GLOBAL2, 0x18);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & 0x8000))
+ return 0;
+
+ usleep_range(1000, 2000);
+ }
+ return -ETIMEDOUT;
+}
+
+static int __mv88e6352_phy_read(struct dsa_switch *ds, int addr, int regnum)
+{
+ int ret;
+
+ REG_WRITE(REG_GLOBAL2, 0x18, 0x9800 | (addr << 5) | regnum);
+
+ ret = mv88e6352_phy_wait(ds);
+ if (ret < 0)
+ return ret;
+
+ return REG_READ(REG_GLOBAL2, 0x19);
+}
+
+static int __mv88e6352_phy_write(struct dsa_switch *ds, int addr, int regnum,
+ u16 val)
+{
+ REG_WRITE(REG_GLOBAL2, 0x19, val);
+ REG_WRITE(REG_GLOBAL2, 0x18, 0x9400 | (addr << 5) | regnum);
+
+ return mv88e6352_phy_wait(ds);
+}
+
+static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ int ret;
+
+ if (bus == NULL)
+ return NULL;
+
+ ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
+ if (ret >= 0) {
+ if (ret == 0x3521)
+ return "Marvell 88E6352 (A0)";
+ if (ret == 0x3522)
+ return "Marvell 88E6352 (A1)";
+ if ((ret & 0xfff0) == 0x3520)
+ return "Marvell 88E6352";
+ }
+
+ return NULL;
+}
+
+static int mv88e6352_switch_reset(struct dsa_switch *ds)
+{
+ unsigned long timeout;
+ int ret;
+ int i;
+
+ /* Set all ports to the disabled state. */
+ for (i = 0; i < 7; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+
+ /* Wait for transmit queues to drain. */
+ usleep_range(2000, 4000);
+
+ /* Reset the switch. Keep PPU active (bit 14, undocumented).
+ * The PPU needs to be active to support indirect phy register
+ * accesses through global registers 0x18 and 0x19.
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
+
+ /* Wait up to one second for reset to complete. */
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & 0x8800) == 0x8800)
+ break;
+ usleep_range(1000, 2000);
+ }
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int mv88e6352_setup_global(struct dsa_switch *ds)
+{
+ int ret;
+ int i;
+
+ /* Discard packets with excessive collisions,
+ * mask all interrupt sources, enable PPU (bit 14, undocumented).
+ */
+ REG_WRITE(REG_GLOBAL, 0x04, 0x6000);
+
+ /* Set the default address aging time to 5 minutes, and
+ * enable address learn messages to be sent to all message
+ * ports.
+ */
+ REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
+
+ /* Configure the priority mapping registers. */
+ ret = mv88e6xxx_config_prio(ds);
+ if (ret < 0)
+ return ret;
+
+ /* Configure the upstream port, and configure the upstream
+ * port as the port to which ingress and egress monitor frames
+ * are to be sent.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
+
+ /* Disable remote management for now, and set the switch's
+ * DSA device number.
+ */
+ REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:2x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
+
+ /* Send all frames with destination addresses matching
+ * 01:80:c2:00:00:0x to the CPU port.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
+
+ /* Disable the loopback filter, disable flow control
+ * messages, disable flood broadcast override, disable
+ * removing of provider tags, disable ATU age violation
+ * interrupts, disable tag flow control, force flow
+ * control priority to the highest, and send all special
+ * multicast frames to the CPU at the highest priority.
+ */
+ REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
+
+ /* Program the DSA routing table. */
+ for (i = 0; i < 32; i++) {
+ int nexthop = 0x1f;
+
+ if (i != ds->index && i < ds->dst->pd->nr_chips)
+ nexthop = ds->pd->rtable[i] & 0x1f;
+
+ REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
+ }
+
+ /* Clear all trunk masks. */
+ for (i = 0; i < 8; i++)
+ REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7f);
+
+ /* Clear all trunk mappings. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
+
+ /* Disable ingress rate limiting by resetting all ingress
+ * rate limit registers to their initial state.
+ */
+ for (i = 0; i < 7; i++)
+ REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
+
+ /* Initialise cross-chip port VLAN table to reset defaults. */
+ REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
+
+ /* Clear the priority override table. */
+ for (i = 0; i < 16; i++)
+ REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
+
+ /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */
+
+ return 0;
+}
+
+static int mv88e6352_setup_port(struct dsa_switch *ds, int p)
+{
+ int addr = REG_PORT(p);
+ u16 val;
+
+ /* MAC Forcing register: don't force link, speed, duplex
+ * or flow control state to any particular values on physical
+ * ports, but force the CPU port and all DSA ports to 1000 Mb/s
+ * full duplex.
+ */
+ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
+ REG_WRITE(addr, 0x01, 0x003e);
+ else
+ REG_WRITE(addr, 0x01, 0x0003);
+
+ /* Do not limit the period of time that this port can be
+ * paused for by the remote end or the period of time that
+ * this port can pause the remote end.
+ */
+ REG_WRITE(addr, 0x02, 0x0000);
+
+ /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+ * disable Header mode, enable IGMP/MLD snooping, disable VLAN
+ * tunneling, determine priority by looking at 802.1p and IP
+ * priority fields (IP prio has precedence), and set STP state
+ * to Forwarding.
+ *
+ * If this is the CPU link, use DSA or EDSA tagging depending
+ * on which tagging mode was configured.
+ *
+ * If this is a link to another switch, use DSA tagging mode.
+ *
+ * If this is the upstream port for this switch, enable
+ * forwarding of unknown unicasts and multicasts.
+ */
+ val = 0x0433;
+ if (dsa_is_cpu_port(ds, p)) {
+ if (ds->dst->tag_protocol == DSA_TAG_PROTO_EDSA)
+ val |= 0x3300;
+ else
+ val |= 0x0100;
+ }
+ if (ds->dsa_port_mask & (1 << p))
+ val |= 0x0100;
+ if (p == dsa_upstream_port(ds))
+ val |= 0x000c;
+ REG_WRITE(addr, 0x04, val);
+
+ /* Port Control 1: disable trunking. Also, if this is the
+ * CPU port, enable learn messages to be sent to this port.
+ */
+ REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
+
+ /* Port based VLAN map: give each port its own address
+ * database, allow the CPU port to talk to each of the 'real'
+ * ports, and allow each of the 'real' ports to only talk to
+ * the upstream port.
+ */
+ val = (p & 0xf) << 12;
+ if (dsa_is_cpu_port(ds, p))
+ val |= ds->phys_port_mask;
+ else
+ val |= 1 << dsa_upstream_port(ds);
+ REG_WRITE(addr, 0x06, val);
+
+ /* Default VLAN ID and priority: don't set a default VLAN
+ * ID, and set the default packet priority to zero.
+ */
+ REG_WRITE(addr, 0x07, 0x0000);
+
+ /* Port Control 2: don't force a good FCS, set the maximum
+ * frame size to 10240 bytes, don't let the switch add or
+ * strip 802.1q tags, don't discard tagged or untagged frames
+ * on this port, do a destination address lookup on all
+ * received packets as usual, disable ARP mirroring and don't
+ * send a copy of all transmitted/received frames on this port
+ * to the CPU.
+ */
+ REG_WRITE(addr, 0x08, 0x2080);
+
+ /* Egress rate control: disable egress rate control. */
+ REG_WRITE(addr, 0x09, 0x0001);
+
+ /* Egress rate control 2: disable egress rate control. */
+ REG_WRITE(addr, 0x0a, 0x0000);
+
+ /* Port Association Vector: when learning source addresses
+ * of packets, add the address to the address database using
+ * a port bitmap that has only the bit for this port set and
+ * the other bits clear.
+ */
+ REG_WRITE(addr, 0x0b, 1 << p);
+
+ /* Port ATU control: disable limiting the number of address
+ * database entries that this port is allowed to use.
+ */
+ REG_WRITE(addr, 0x0c, 0x0000);
+
+ /* Priority Override: disable DA, SA and VTU priority override. */
+ REG_WRITE(addr, 0x0d, 0x0000);
+
+ /* Port Ethertype: use the Ethertype DSA Ethertype value. */
+ REG_WRITE(addr, 0x0f, ETH_P_EDSA);
+
+ /* Tag Remap: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x18, 0x3210);
+
+ /* Tag Remap 2: use an identity 802.1p prio -> switch prio
+ * mapping.
+ */
+ REG_WRITE(addr, 0x19, 0x7654);
+
+ return 0;
+}
+
+static int mv88e6352_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+ int i;
+
+ mutex_init(&ps->smi_mutex);
+ mutex_init(&ps->stats_mutex);
+ mutex_init(&ps->phy_mutex);
+
+ ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0;
+
+ ret = mv88e6352_switch_reset(ds);
+ if (ret < 0)
+ return ret;
+
+ /* @@@ initialise vtu and atu */
+
+ ret = mv88e6352_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < 7; i++) {
+ ret = mv88e6352_setup_port(ds, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv88e6352_port_to_phy_addr(int port)
+{
+ if (port >= 0 && port <= 4)
+ return port;
+ return -EINVAL;
+}
+
+static int
+mv88e6352_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int addr = mv88e6352_port_to_phy_addr(port);
+ int ret;
+
+ if (addr < 0)
+ return addr;
+
+ mutex_lock(&ps->phy_mutex);
+ ret = __mv88e6352_phy_read(ds, addr, regnum);
+ mutex_unlock(&ps->phy_mutex);
+
+ return ret;
+}
+
+static int
+mv88e6352_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int addr = mv88e6352_port_to_phy_addr(port);
+ int ret;
+
+ if (addr < 0)
+ return addr;
+
+ mutex_lock(&ps->phy_mutex);
+ ret = __mv88e6352_phy_write(ds, addr, regnum, val);
+ mutex_unlock(&ps->phy_mutex);
+
+ return ret;
+}
+
+static struct mv88e6xxx_hw_stat mv88e6352_hw_stats[] = {
+ { "in_good_octets", 8, 0x00, },
+ { "in_bad_octets", 4, 0x02, },
+ { "in_unicast", 4, 0x04, },
+ { "in_broadcasts", 4, 0x06, },
+ { "in_multicasts", 4, 0x07, },
+ { "in_pause", 4, 0x16, },
+ { "in_undersize", 4, 0x18, },
+ { "in_fragments", 4, 0x19, },
+ { "in_oversize", 4, 0x1a, },
+ { "in_jabber", 4, 0x1b, },
+ { "in_rx_error", 4, 0x1c, },
+ { "in_fcs_error", 4, 0x1d, },
+ { "out_octets", 8, 0x0e, },
+ { "out_unicast", 4, 0x10, },
+ { "out_broadcasts", 4, 0x13, },
+ { "out_multicasts", 4, 0x12, },
+ { "out_pause", 4, 0x15, },
+ { "excessive", 4, 0x11, },
+ { "collisions", 4, 0x1e, },
+ { "deferred", 4, 0x05, },
+ { "single", 4, 0x14, },
+ { "multiple", 4, 0x17, },
+ { "out_fcs_error", 4, 0x03, },
+ { "late", 4, 0x1f, },
+ { "hist_64bytes", 4, 0x08, },
+ { "hist_65_127bytes", 4, 0x09, },
+ { "hist_128_255bytes", 4, 0x0a, },
+ { "hist_256_511bytes", 4, 0x0b, },
+ { "hist_512_1023bytes", 4, 0x0c, },
+ { "hist_1024_max_bytes", 4, 0x0d, },
+};
+
+static void
+mv88e6352_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
+{
+ mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6352_hw_stats),
+ mv88e6352_hw_stats, port, data);
+}
+
+static void
+mv88e6352_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
+{
+ mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6352_hw_stats),
+ mv88e6352_hw_stats, port, data);
+}
+
+static int mv88e6352_get_sset_count(struct dsa_switch *ds)
+{
+ return ARRAY_SIZE(mv88e6352_hw_stats);
+}
+
+struct dsa_switch_driver mv88e6352_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6352_probe,
+ .setup = mv88e6352_setup,
+ .set_addr = mv88e6xxx_set_addr_indirect,
+ .phy_read = mv88e6352_phy_read,
+ .phy_write = mv88e6352_phy_write,
+ .poll_link = mv88e6xxx_poll_link,
+ .get_strings = mv88e6352_get_strings,
+ .get_ethtool_stats = mv88e6352_get_ethtool_stats,
+ .get_sset_count = mv88e6352_get_sset_count,
+};
+
+MODULE_ALIAS("platform:mv88e6352");
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index a6c90cf..8e1090b 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -507,6 +507,9 @@ static int __init mv88e6xxx_init(void)
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
register_switch_driver(&mv88e6123_61_65_switch_driver);
#endif
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
+ register_switch_driver(&mv88e6352_switch_driver);
+#endif
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6171)
register_switch_driver(&mv88e6171_switch_driver);
#endif
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 5e5145a..77beff5 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -37,6 +37,12 @@ struct mv88e6xxx_priv_state {
*/
struct mutex stats_mutex;
+ /* This mutex serializes phy access for chips with
+ * indirect phy addressing. It is unused for chips
+ * with direct phy access.
+ */
+ struct mutex phy_mutex;
+
int id; /* switch product id */
};
@@ -70,6 +76,7 @@ void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds,
extern struct dsa_switch_driver mv88e6131_switch_driver;
extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
+extern struct dsa_switch_driver mv88e6352_switch_driver;
extern struct dsa_switch_driver mv88e6171_switch_driver;
#define REG_READ(addr, reg) \
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
