On 2014年10月24日 19:46, Haojian Zhuang wrote:
On Thu, Oct 23, 2014 at 10:04 PM, Zhou Wang <wangzhou....@gmail.com> wrote:
Signed-off-by: Zhou Wang <wangzhou....@gmail.com>
---
drivers/mtd/nand/Kconfig | 5 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/hisi504_nand.c | 836 +++++++++++++++++++++++++++++++++++++++
3 files changed, 842 insertions(+)
create mode 100644 drivers/mtd/nand/hisi504_nand.c
I think that you need to run scripts/checkpatch.pl. There're some
warnings reported on this patch.
Hi Haojian,
I will run the checkpatch.pl again and fix the warnings.
But for lines like this:
+ if (host->command == NAND_CMD_ERASE1)
+ host->addr_value[0] |= ((page_addr >>16) & 0xff) << 16;
+ else
+ host->addr_value[1] |= ((page_addr >> 16) & 0xff);
Only over 80 for some characters in one line, it will report a warning.
Can I just leave the warning there for the tidy of the code?
+
+ case NAND_CMD_SEQIN:
+ host->offset = column;
+
It's better not using waterfall style. Maybe you can write it clearly.
case NAND_CMD_SEQIN:
host->offset = column;
set_addr(mtd, column, page_addr);
break;
Thanks, I will modify the code like this above.
+ chip->ecc.mode = of_get_nand_ecc_mode(np);
+ /* read ecc-bits from dts */
+ of_property_read_u32(np, "hisi,nand-ecc-bits", &host->ecc_bits);
Do you need to check the ecc_bits at here? Maybe user inputed the
wrong ecc_bits in DTS.
Yes, it is better to check the ecc_bits here, thanks for your reminding.
Best regards,
Zhou Wang
Best Regards
Haojian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
