Add SDHCI node for supporting the micro SD card. On Trats2 board the SDHCI does not use sd2_cd pins (gpk2-2) for card detect but gpx3-4 instead.
Power is supplied from LDO21 regulator which in off state is controlled by external GPIO pin. Signed-off-by: Krzysztof Kozlowski <[email protected]> --- arch/arm/boot/dts/exynos4412-trats2.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index a5aa52bba72c..2e5d0fdf8362 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -603,6 +603,17 @@ cap-mmc-highspeed; }; + /* FIXME: suspend fails... */ + sdhci@12530000 { + bus-width = <4>; + cd-gpios = <&gpx3 4 0>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + status = "okay"; + }; + serial@13800000 { status = "okay"; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
