The USB controller and phy clocks and resets have a separate address
block and driver. Add the nodes to represent them.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 494714f..3c25030 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -143,6 +143,28 @@
clock-output-names = "osc32k";
};
+ usb_mod_clk: clk@00a08000 {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun9i-a80-usb-mod-clk";
+ reg = <0x00a08000 0x4>;
+ clocks = <&ahb1_gates 1>, <&pll4>;
+ clock-output-names = "usb0_ahb", "usb_ohci0",
+ "usb1_ahb", "usb_ohci1",
+ "usb2_ahb", "usb_ohci2";
+ };
+
+ usb_phy_clk: clk@00a08004 {
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ compatible = "allwinner,sun9i-a80-usb-phy-clk";
+ reg = <0x00a08004 0x4>;
+ clocks = <&ahb1_gates 1>, <&pll4>;
+ clock-output-names = "usb_phy0", "usb_hsic1_480M",
+ "usb_phy1", "usb_hsic2_480M",
+ "usb_phy2", "usb_hsic_12M";
+ };
+
pll4: clk@0600000c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-pll4-clk";
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
