On sun9i, there are 3 independent usb phys. Add device nodes for them.
Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 3c25030..1a80e09 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -305,6 +305,43 @@
*/
ranges = <0 0 0 0x20000000>;
+ usbphy0: phy@00a00800 {
+ compatible = "allwinner,sun9i-a80-usb-phy";
+ reg = <0x00a00800 0x4>;
+ clocks = <&usb_phy_clk 1>;
+ clock-names = "phy";
+ resets = <&usb_phy_clk 17>;
+ reset-names = "phy";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ usbphy1: phy@00a01800 {
+ compatible = "allwinner,sun9i-a80-usb-phy";
+ reg = <0x00a01800 0x4>;
+ clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+ <&usb_phy_clk 3>;
+ clock-names = "hsic_480M", "hsic_12M", "phy";
+ resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+ reset-names = "hsic", "phy";
+ status = "disabled";
+ #phy-cells = <0>;
+ /* usb1 is always used with HSIC */
+ phy_type = "hsic";
+ };
+
+ usbphy2: phy@00a02800 {
+ compatible = "allwinner,sun9i-a80-usb-phy";
+ reg = <0x00a02800 0x4>;
+ clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+ <&usb_phy_clk 5>;
+ clock-names = "hsic_480M", "hsic_12M", "phy";
+ resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+ reset-names = "hsic", "phy";
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
gic: interrupt-controller@01c41000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c41000 0x1000>,
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
