On Fri, 07 Nov 2014, Peter Griffin wrote: > This patch adds the required pin config for all usb controllers > on the stih416. > > Signed-off-by: Peter Griffin <[email protected]> > --- > arch/arm/boot/dts/stih416-pinctrl.dtsi | 34 > ++++++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+)
Acked-by: Lee Jones <[email protected]> > diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi > b/arch/arm/boot/dts/stih416-pinctrl.dtsi > index c2025bc..9cccf2d 100644 > --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi > +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi > @@ -147,6 +147,15 @@ > }; > }; > > + usb { > + pinctrl_usb3: usb3 { > + st,pins { > + oc-detect = <&pio40 0 ALT1 IN>; > + pwr-enable = <&pio40 1 ALT1 > OUT>; > + }; > + }; > + }; > + > sbc_i2c1 { > pinctrl_sbc_i2c1_default: sbc_i2c1-default { > st,pins { > @@ -318,6 +327,16 @@ > }; > }; > > + usb { > + pinctrl_usb0: usb0 { > + st,pins { > + oc-detect = <&pio9 4 ALT1 IN>; > + pwr-enable = <&pio9 5 ALT1 OUT>; > + }; > + }; > + }; > + > + > i2c1 { > pinctrl_i2c1_default: i2c1-default { > st,pins { > @@ -506,6 +525,21 @@ > }; > }; > }; > + > + usb { > + pinctrl_usb1: usb1 { > + st,pins { > + oc-detect = <&pio18 0 ALT1 IN>; > + pwr-enable = <&pio18 1 ALT1 > OUT>; > + }; > + }; > + pinctrl_usb2: usb2 { > + st,pins { > + oc-detect = <&pio18 2 ALT1 IN>; > + pwr-enable = <&pio18 3 ALT1 > OUT>; > + }; > + }; > + }; > }; > > pin-controller-fvdp-fe { -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
