On 16:58-20150103, Rickard Strandqvist wrote:
> Remove the function sr_configure_minmax() that is not used anywhere.
>
> This was partially found by using a static code analysis program called
> cppcheck.
>
> Signed-off-by: Rickard Strandqvist <rickard_strandqv...@spectrumdigital.se>
> ---
> drivers/power/avs/smartreflex.c | 86
> -------------------------------------
> include/linux/power/smartreflex.h | 1 -
> 2 files changed, 87 deletions(-)
>
> diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
> index db9973b..62b8351 100644
> --- a/drivers/power/avs/smartreflex.c
> +++ b/drivers/power/avs/smartreflex.c
> @@ -460,92 +460,6 @@ int sr_disable_errgen(struct omap_sr *sr)
> }
>
> /**
> - * sr_configure_minmax() - Configures the SmartReflex to perform AVS using
> the
> - * minmaxavg module.
> - * @sr: SR module to be configured.
> - *
> - * This API is to be called from the smartreflex class driver to
> - * configure the minmaxavg module inside the smartreflex module.
> - * SR settings if using the ERROR module inside Smartreflex.
> - * SR CLASS 3 by default uses only the ERROR module where as
> - * SR CLASS 2 can choose between ERROR module and MINMAXAVG
> - * module. Returns 0 on success and error value in case of failure.
> - */
> -int sr_configure_minmax(struct omap_sr *sr)
> -{
> - u32 sr_config, sr_avgwt;
> - u32 senp_en = 0, senn_en = 0;
> - u8 senp_shift, senn_shift;
> -
> - if (!sr) {
> - pr_warn("%s: NULL omap_sr from %pF\n", __func__,
> - (void *)_RET_IP_);
> - return -EINVAL;
> - }
> -
> - if (!sr->clk_length)
> - sr_set_clk_length(sr);
> -
> - senp_en = sr->senp_mod;
> - senn_en = sr->senn_mod;
> -
> - sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
> - SRCONFIG_SENENABLE |
> - (sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
> -
> - switch (sr->ip_type) {
> - case SR_TYPE_V1:
> - sr_config |= SRCONFIG_DELAYCTRL;
> - senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
> - senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
> - break;
> - case SR_TYPE_V2:
> - senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
> - senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
> - break;
> - default:
> - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
> - "module without specifying the ip\n", __func__);
> - return -EINVAL;
> - }
> -
> - sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
> - sr_write_reg(sr, SRCONFIG, sr_config);
> - sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
> - (sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
> - sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
> -
> - /*
> - * Enabling the interrupts if MINMAXAVG module is used.
> - * TODO: check if all the interrupts are mandatory
> - */
> - switch (sr->ip_type) {
> - case SR_TYPE_V1:
> - sr_modify_reg(sr, ERRCONFIG_V1,
> - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
> - ERRCONFIG_MCUBOUNDINTEN),
> - (ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
> - ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
> - ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
> - break;
> - case SR_TYPE_V2:
> - sr_write_reg(sr, IRQSTATUS,
> - IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
> - IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
> - sr_write_reg(sr, IRQENABLE_SET,
> - IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
> - IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
> - break;
> - default:
> - dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
> - "module without specifying the ip\n", __func__);
> - return -EINVAL;
> - }
> -
> - return 0;
> -}
> -
> -/**
> * sr_enable() - Enables the smartreflex module.
> * @sr: pointer to which the SR module to be configured belongs
> to.
> * @volt: The voltage at which the Voltage domain associated with
> diff --git a/include/linux/power/smartreflex.h
> b/include/linux/power/smartreflex.h
> index d8b187c3..ffd31af 100644
> --- a/include/linux/power/smartreflex.h
> +++ b/include/linux/power/smartreflex.h
> @@ -303,7 +303,6 @@ int sr_enable(struct omap_sr *sr, unsigned long volt);
> void sr_disable(struct omap_sr *sr);
> int sr_configure_errgen(struct omap_sr *sr);
> int sr_disable_errgen(struct omap_sr *sr);
> -int sr_configure_minmax(struct omap_sr *sr);
>
> /* API to register the smartreflex class driver with the smartreflex driver
> */
> int sr_register_class(struct omap_sr_class_data *class_data);
> --
> 1.7.10.4
>
This is potentially used by downstream drivers which are pending cleanup
of remaining OMAP infrastructure since the transition from hwmod to
devicetree has multiple impact including the conversion of vc/vp back
into devicetree supported world (proper regulator framework). while we
can throw away code by looking at a specific snapshot, it might just
confuse the future transition.
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
