On Fri, 23 Jan 2015, David Paris wrote:
> Hi Lee,
>
> Just a minor remark/question,
>
> David
>
> On 01/22/2015 12:56 PM, Lee Jones wrote:
> >On current ST platforms the LPC controls a number of functions. This
> >patch enables support for the LPC Watchdog and LPC RTC devices on LPC1
> >and LPC2 respectively.
> >
> >Signed-off-by: David Paris <david.pa...@st.com>
> >Signed-off-by: Lee Jones <lee.jo...@linaro.org>
> >---
> > arch/arm/boot/dts/stih407-family.dtsi | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> >diff --git a/arch/arm/boot/dts/stih407-family.dtsi
> >b/arch/arm/boot/dts/stih407-family.dtsi
> >index 3e31d32..04448a7 100644
> >--- a/arch/arm/boot/dts/stih407-family.dtsi
> >+++ b/arch/arm/boot/dts/stih407-family.dtsi
> >@@ -7,6 +7,7 @@
> > * publishhed by the Free Software Foundation.
> > */
> > #include "stih407-pinctrl.dtsi"
> >+#include <dt-bindings/mfd/st-lpc.h>
> > #include <dt-bindings/reset-controller/stih407-resets.h>
> > / {
> > #address-cells = <1>;
> >@@ -274,5 +275,24 @@
> > status = "disabled";
> > };
> >+
> >+ /* Watchdog and Real-Time Clock */
> >+ lpc@8787000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8787000 0x1000>;
> >+ interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
> In case of Watchdog, "interrupt" property is not used. So I think we
> can remove it ?
Sure thing.
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
> >+ timeout-sec = <120>;
> >+ st,syscfg = <&syscfg_core>;
> >+ st,lpc-mode = <ST_LPC_MODE_WDT>;
> >+ };
> >+
> >+ lpc@8788000 {
> >+ compatible = "st,stih407-lpc";
> >+ reg = <0x8788000 0x1000>;
> >+ interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
> >+ clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
> >+ st,lpc-mode = <ST_LPC_MODE_RTC>;
> >+ };
> > };
> > };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
