Add a node describing the nand controller of the Marvell Berlin BG2Q SoC. It uses the pxa3xx nand driver, with a dedicated compatible.
Also add the corresponding pinmuxing configuration. Signed-off-by: Antoine Tenart <[email protected]> --- arch/arm/boot/dts/berlin2q.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index e2f61f27944e..f1bc614f0281 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -359,6 +359,11 @@ clocks = <&refclk>; clock-names = "refclk"; + nand_pmux: nand-pmux { + groups = "G0", "G1"; + function = "nand"; + }; + twsi0_pmux: twsi0-pmux { groups = "G6"; function = "twsi0"; @@ -429,6 +434,22 @@ status = "disabled"; }; + nand0: nand@f00000 { + compatible = "marvell,berlin2-nand"; + reg = <0xf00000 0x10000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_NFC>, + <&chip CLKID_NFC_ECC>; + clock-names = "nfc", "ecc"; + + pinctrl-0 = <&nand_pmux>; + pinctrl-names = "default"; + + #address-cells = <1>; + + status = "disabled"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; -- 2.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
