On 24/02/15 22:05, Robert ABEL wrote:
> The WAITMONITORINGTIME is expressed as a number of GPMC_CLK clock cycles,
> even though the access is defined as asynchronous, and no GPMC_CLK clock
> is provided to the external device. Still, GPMCFCLKDIVIDER is used as a
> divider
> for the GPMC clock, so it must be programmed to define the
> correct WAITMONITORINGTIME delay.
>
> Calculate GPMCFCLKDIVIDER independent of gpmc,sync-clk-ps in DT for
> truly asynchronous accesses, i.e. both read and write asynchronous.
>
> Signed-off-by: Robert ABEL <ra...@cit-ec.uni-bielefeld.de>
> ---
> arch/arm/mach-omap2/gpmc-nand.c | 17 ++++-----
> arch/arm/mach-omap2/gpmc-onenand.c | 4 +--
> drivers/memory/omap-gpmc.c | 74
> ++++++++++++++++++++++++++++++++++----
> include/linux/omap-gpmc.h | 2 +-
> 4 files changed, 80 insertions(+), 17 deletions(-)
>
./scripts/checkpatch.pl detects some styling errors.
> diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
> index d5951b1..e863a59 100644
> --- a/arch/arm/mach-omap2/gpmc-nand.c
> +++ b/arch/arm/mach-omap2/gpmc-nand.c
> @@ -96,14 +96,6 @@ int gpmc_nand_init(struct omap_nand_platform_data
> *gpmc_nand_data,
> gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
> gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
>
> - if (gpmc_t) {
> - err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t);
> - if (err < 0) {
> - pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n",
> err);
> - return err;
> - }
> - }
> -
> memset(&s, 0, sizeof(struct gpmc_settings));
> if (gpmc_nand_data->of_node)
> gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
> @@ -111,6 +103,15 @@ int gpmc_nand_init(struct omap_nand_platform_data
> *gpmc_nand_data,
> gpmc_set_legacy(gpmc_nand_data, &s);
>
> s.device_nand = true;
> +
> + if (gpmc_t) {
> + err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s);
> + if (err < 0) {
> + pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n",
> err);
> + return err;
> + }
> + }
> +
> err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
> if (err < 0)
> goto out_free_cs;
> diff --git a/arch/arm/mach-omap2/gpmc-onenand.c
> b/arch/arm/mach-omap2/gpmc-onenand.c
> index 53d197e..f899e77 100644
> --- a/arch/arm/mach-omap2/gpmc-onenand.c
> +++ b/arch/arm/mach-omap2/gpmc-onenand.c
> @@ -293,7 +293,7 @@ static int omap2_onenand_setup_async(void __iomem
> *onenand_base)
> if (ret < 0)
> return ret;
>
> - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
> + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_async);
> if (ret < 0)
> return ret;
>
> @@ -331,7 +331,7 @@ static int omap2_onenand_setup_sync(void __iomem
> *onenand_base, int *freq_ptr)
> if (ret < 0)
> return ret;
>
> - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
> + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_sync);
> if (ret < 0)
> return ret;
>
> diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> index a6abaf0..9cf8d21 100644
> --- a/drivers/memory/omap-gpmc.c
> +++ b/drivers/memory/omap-gpmc.c
> @@ -139,6 +139,8 @@
> #define GPMC_CONFIG1_WAIT_READ_MON (1 << 22)
> #define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21)
> #define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
Not caused by your patch but we can fix the typo
GPMC_CONFIG1_WAIT_MON_IIME -> GPMC_CONFIG1_WAIT_MON_TIME
> +/** WAITMONITORINGTIME Max Ticks */
> +#define GPMC_CONFIG1_WAIT_MON_TIME_MAX 2
> #define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16)
> #define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12)
> #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
> @@ -511,13 +513,41 @@ static int set_gpmc_timing_reg(int cs, int reg, int
> st_bit, int end_bit,
> t->field, #field) < 0) \
> return -1
>
> +/**
> + * gpmc_calc_waitmonitoring_divider - calculate proper GPMCFCLKDIVIDER based
> on WAITMONITORINGTIME
> + * @wait_monitoring WAITMONITORINGTIME in ns.
> + * @return -1 on failure to scale, else proper divider > 0.
> + * @note WAITMONITORINGTIME will be _at least_ as long as desired.
> + * i.e. read timings should be kept -> don't
> sample bus too early
> + * while write timings should work out as well -> data is
> longer on bus
> + */
> +static int gpmc_calc_waitmonitoring_divider(unsigned int wait_monitoring)
> +{
> +
> + int div = gpmc_ns_to_ticks(wait_monitoring);
> +
> + div += GPMC_CONFIG1_WAIT_MON_TIME_MAX - 1;
> + div /= GPMC_CONFIG1_WAIT_MON_TIME_MAX;
Sorry I didn't understand how this works. :P
>From the TRM,
waitmonitoringtime_ns = waitmonitoring_ticks x (gpmc_clk_div + 1) x gpmc_fclk_ns
> +
> + if (div > 4)
> + return -1;
> + if (div <= 0)
> + div = 1;
> +
> + return div;
> +
> +}
> +
> +/**
> + * gpmc_calc_divider - calculate GPMC_FCLK divider for sync_clk GPMC_CLK
> period.
> + * @sync_clk GPMC_CLK period in ps.
> + * @return Returns at least 1 if GPMC_FCLK can be divided to GPMC_CLK.
> + * Else, returns -1.
> + */
> int gpmc_calc_divider(unsigned int sync_clk)
> {
> - int div;
> - u32 l;
> + int div = gpmc_ps_to_ticks(sync_clk);
>
> - l = sync_clk + (gpmc_get_fclk_period() - 1);
> - div = l / gpmc_get_fclk_period();
> if (div > 4)
> return -1;
> if (div <= 0)
> @@ -526,7 +556,13 @@ int gpmc_calc_divider(unsigned int sync_clk)
> return div;
> }
>
> -int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
> +/**
> + * gpmc_cs_set_timings - program timing parameters for Chip Select Region.
> + * @cs Chip Select Region.
> + * @t GPMC timing parameters.
> + * @s GPMC timing settings.
> + */
> +int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t, const struct
> gpmc_settings *s)
> {
> int div;
> u32 l;
> @@ -536,6 +572,32 @@ int gpmc_cs_set_timings(int cs, const struct
> gpmc_timings *t)
> if (div < 0)
> return div;
>
> + /*
> + * See if we need to change the divider for waitmonitoringtime.
> + *
> + * If DT contains sync-clk-ps for truly asynchronous accesses,
> + * ignore it as long as waitmonitoringtime is used.
> + *
The comment in the $subject was more easier to understand for me than the above
"Calculate GPMCFCLKDIVIDER independent of gpmc,sync-clk-ps in DT for
truly asynchronous accesses, i.e. both read and write asynchronous."
> + * This protects mixed synchronous and asynchronous devices,
> + * i.e. must not change div to scale async waitmonitoringtime or
> + * sync accesses would be broken.
> + *
> + * We raise an error later if waitmonitoringtime does not fit.
> + */
> + if (!s->sync_read && !s->sync_write &&
> + (s->wait_on_read || s->wait_on_write)
> + ) {
> +
> + div = gpmc_calc_waitmonitoring_divider(t->wait_monitoring);
> + if (div < 0) {
> + pr_err("%s: waitmonitoringtime %3d ns too large for
> greatest gpmcfclkdivider.\n",
> + __func__,
> + t->wait_monitoring
> + );
> + return -1;
> + }
> + }
> +
> GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
> GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
> GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
> @@ -1793,7 +1855,7 @@ static int gpmc_probe_generic_child(struct
> platform_device *pdev,
> if (ret < 0)
> goto err;
>
> - ret = gpmc_cs_set_timings(cs, &gpmc_t);
> + ret = gpmc_cs_set_timings(cs, &gpmc_t, &gpmc_s);
> if (ret) {
> dev_err(&pdev->dev, "failed to set gpmc timings for: %s\n",
> child->name);
> diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
> index c2080ee..9301437 100644
> --- a/include/linux/omap-gpmc.h
> +++ b/include/linux/omap-gpmc.h
> @@ -163,7 +163,7 @@ extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
>
> extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
> extern int gpmc_calc_divider(unsigned int sync_clk);
> -extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
> +extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t, const
> struct gpmc_settings *s);
> extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
> extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
> extern void gpmc_cs_free(int cs);
>
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
