The register offset for REGEN2_CTRL in different for TPS659038 chip as when compared with other Palmas family PMICs. In the case of TPS659038 the wrong offset pointed to PLLEN_CTRL and was causing a hang. Correcting the same.
Signed-off-by: Keerthy <[email protected]> --- Tested for the regulator enumerations on DRA7 and BEAGLE-X15 boards. No Hang observed. drivers/regulator/palmas-regulator.c | 4 ++++ include/linux/mfd/palmas.h | 3 +++ 2 files changed, 7 insertions(+) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 9205f43..1819831 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -1572,6 +1572,10 @@ static int palmas_regulators_probe(struct platform_device *pdev) if (!pmic) return -ENOMEM; + if (of_device_is_compatible(node, "ti,tps659038-pmic")) + palmas_generic_regs_info[PALMAS_REG_REGEN2].ctrl_addr = + TPS659038_REGEN2_CTRL; + pmic->dev = &pdev->dev; pmic->palmas = palmas; palmas->pmic = pmic; diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index fb0390a..ee7b1ce 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -2999,6 +2999,9 @@ enum usb_irq_events { #define PALMAS_GPADC_TRIM15 0x0E #define PALMAS_GPADC_TRIM16 0x0F +/* TPS659038 regen2_ctrl offset iss different from palmas */ +#define TPS659038_REGEN2_CTRL 0x12 + /* TPS65917 Interrupt registers */ /* Registers for function INTERRUPT */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
