On Wed, 2015-04-01 at 12:58 +0900, Ingi Kim wrote:
> This patch adds a driver to support the ktd2692 flash LEDs.
> ktd2692 can control flash current by ExpressWire interface.
trivia:
> diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
[]
> +static void ktd2692_brightness_set(struct ktd2692_context *led,
> + enum led_brightness brightness)
> +{
> + mutex_lock(&led->lock);
> +
> + if (brightness == LED_OFF) {
> + led->mode = KTD2692_MODE_DISABLE;
> + gpio_set_value(led->aux_gpio, KTD2692_LOW);
> + goto out;
> + }
> +
> + ktd2692_expresswire_write(led, KTD2692_REG_MOVIE_CURRENT_BASE |
> + KTD2692_BRIGHTNESS_RANGE_255_TO_8(brightness));
> + led->mode = KTD2692_MODE_MOVIE;
> +
> +out:
> + ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
> + mutex_unlock(&led->lock);
> +}
Perhaps this function would be better with if/else
without the out: label
> +static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
> + bool state)
> +{
> + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
> + struct led_flash_setting *timeout = &fled_cdev->timeout;
> + u32 flash_tm_reg;
> +
> + mutex_lock(&led->lock);
> +
> + if (state == 0) {
> + led->mode = KTD2692_MODE_DISABLE;
> + gpio_set_value(led->aux_gpio, KTD2692_LOW);
> + goto done;
> + }
> +
> + flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step);
> + ktd2692_expresswire_write(led, flash_tm_reg
> + | KTD2692_REG_FLASH_TIMEOUT_BASE);
> +
> + led->mode = KTD2692_MODE_FLASH;
> + gpio_set_value(led->aux_gpio, KTD2692_HIGH);
> +
> +done:
> + ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
Same if/else with the done: label?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
