Add driver for USB 28nm PHY found in Marvell PXA1928 SOC.
Signed-off-by: Rob Herring <r...@kernel.org>
Cc: Kishon Vijay Abraham I <kis...@ti.com>
---
drivers/phy/Kconfig | 10 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-pxa-28nm-usb2.c | 355 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 366 insertions(+)
create mode 100644 drivers/phy/phy-pxa-28nm-usb2.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a53bd5b..71409a1 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -52,6 +52,16 @@ config PHY_EXYNOS_MIPI_VIDEO
Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
and EXYNOS SoCs.
+config PHY_PXA_28NM_USB2
+ tristate "Marvell USB 2.0 28nm PHY Driver"
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell USB 2.0 PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+ To compile this driver as a module, choose M here.
+
config PHY_MVEBU_SATA
def_bool y
depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f126251..8524307 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) +=
phy-armada375-usb2.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
diff --git a/drivers/phy/phy-pxa-28nm-usb2.c b/drivers/phy/phy-pxa-28nm-usb2.c
new file mode 100644
index 0000000..37e9c8c
--- /dev/null
+++ b/drivers/phy/phy-pxa-28nm-usb2.c
@@ -0,0 +1,355 @@
+/*
+ * Copyright (C) 2015 Linaro, Ltd.
+ * Rob Herring <r...@kernel.org>
+ *
+ * Based on vendor driver:
+ * Copyright (C) 2013 Marvell Inc.
+ * Author: Chao Xie <xiechao.m...@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+/* USB PXA1928 PHY mapping */
+#define PHY_28NM_PLL_REG0 0x0
+#define PHY_28NM_PLL_REG1 0x4
+#define PHY_28NM_CAL_REG 0x8
+#define PHY_28NM_TX_REG0 0x0c
+#define PHY_28NM_TX_REG1 0x10
+#define PHY_28NM_RX_REG0 0x14
+#define PHY_28NM_RX_REG1 0x18
+#define PHY_28NM_DIG_REG0 0x1c
+#define PHY_28NM_DIG_REG1 0x20
+#define PHY_28NM_TEST_REG0 0x24
+#define PHY_28NM_TEST_REG1 0x28
+#define PHY_28NM_MOC_REG 0x2c
+#define PHY_28NM_PHY_RESERVE 0x30
+#define PHY_28NM_OTG_REG 0x34
+#define PHY_28NM_CHRG_DET 0x38
+#define PHY_28NM_CTRL_REG0 0xc4
+#define PHY_28NM_CTRL_REG1 0xc8
+#define PHY_28NM_CTRL_REG2 0xd4
+#define PHY_28NM_CTRL_REG3 0xdc
+
+/* PHY_28NM_PLL_REG0 */
+#define PHY_28NM_PLL_READY BIT(31)
+
+#define PHY_28NM_PLL_SELLPFR_SHIFT 28
+#define PHY_28NM_PLL_SELLPFR_MASK (0x3 << 28)
+
+#define PHY_28NM_PLL_FBDIV_SHIFT 16
+#define PHY_28NM_PLL_FBDIV_MASK (0x1ff << 16)
+
+#define PHY_28NM_PLL_ICP_SHIFT 8
+#define PHY_28NM_PLL_ICP_MASK (0x7 << 8)
+
+#define PHY_28NM_PLL_REFDIV_SHIFT 0
+#define PHY_28NM_PLL_REFDIV_MASK 0x7f
+
+/* PHY_28NM_PLL_REG1 */
+#define PHY_28NM_PLL_PU_BY_REG BIT(1)
+
+#define PHY_28NM_PLL_PU_PLL BIT(0)
+
+/* PHY_28NM_CAL_REG */
+#define PHY_28NM_PLL_PLLCAL_DONE BIT(31)
+
+#define PHY_28NM_PLL_IMPCAL_DONE BIT(23)
+
+#define PHY_28NM_PLL_KVCO_SHIFT 16
+#define PHY_28NM_PLL_KVCO_MASK (0x7 << 16)
+
+#define PHY_28NM_PLL_CAL12_SHIFT 20
+#define PHY_28NM_PLL_CAL12_MASK (0x3 << 20)
+
+#define PHY_28NM_IMPCAL_VTH_SHIFT 8
+#define PHY_28NM_IMPCAL_VTH_MASK (0x7 << 8)
+
+#define PHY_28NM_PLLCAL_START_SHIFT 22
+#define PHY_28NM_IMPCAL_START_SHIFT 13
+
+/* PHY_28NM_TX_REG0 */
+#define PHY_28NM_TX_PU_BY_REG BIT(25)
+
+#define PHY_28NM_TX_PU_ANA BIT(24)
+
+#define PHY_28NM_TX_AMP_SHIFT 20
+#define PHY_28NM_TX_AMP_MASK (0x7 << 20)
+
+/* PHY_28NM_RX_REG0 */
+#define PHY_28NM_RX_SQ_THRESH_SHIFT 0
+#define PHY_28NM_RX_SQ_THRESH_MASK (0xf << 0)
+
+/* PHY_28NM_RX_REG1 */
+#define PHY_28NM_RX_SQCAL_DONE BIT(31)
+
+/* PHY_28NM_DIG_REG0 */
+#define PHY_28NM_DIG_BITSTAFFING_ERR BIT(31)
+#define PHY_28NM_DIG_SYNC_ERR BIT(30)
+
+#define PHY_28NM_DIG_SQ_FILT_SHIFT 16
+#define PHY_28NM_DIG_SQ_FILT_MASK (0x7 << 16)
+
+#define PHY_28NM_DIG_SQ_BLK_SHIFT 12
+#define PHY_28NM_DIG_SQ_BLK_MASK (0x7 << 12)
+
+#define PHY_28NM_DIG_SYNC_NUM_SHIFT 0
+#define PHY_28NM_DIG_SYNC_NUM_MASK (0x3 << 0)
+
+#define PHY_28NM_PLL_LOCK_BYPASS BIT(7)
+
+/* PHY_28NM_OTG_REG */
+#define PHY_28NM_OTG_CONTROL_BY_PIN BIT(5)
+#define PHY_28NM_OTG_PU_OTG BIT(4)
+
+#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DM_SHIFT_28 13
+#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DP_SHIFT_28 12
+#define PHY_28NM_CHGDTC_VSRC_CHARGE_SHIFT_28 10
+#define PHY_28NM_CHGDTC_VDAT_CHARGE_SHIFT_28 8
+#define PHY_28NM_CHGDTC_CDP_DM_AUTO_SWITCH_SHIFT_28 7
+#define PHY_28NM_CHGDTC_DP_DM_SWAP_SHIFT_28 6
+#define PHY_28NM_CHGDTC_PU_CHRG_DTC_SHIFT_28 5
+#define PHY_28NM_CHGDTC_PD_EN_SHIFT_28 4
+#define PHY_28NM_CHGDTC_DCP_EN_SHIFT_28 3
+#define PHY_28NM_CHGDTC_CDP_EN_SHIFT_28 2
+#define PHY_28NM_CHGDTC_TESTMON_CHRGDTC_SHIFT_28 0
+
+#define PHY_28NM_CTRL1_CHRG_DTC_OUT_SHIFT_28 4
+#define PHY_28NM_CTRL1_VBUSDTC_OUT_SHIFT_28 2
+
+#define PHY_28NM_CTRL3_OVERWRITE BIT(0)
+#define PHY_28NM_CTRL3_VBUS_VALID BIT(4)
+#define PHY_28NM_CTRL3_AVALID BIT(5)
+#define PHY_28NM_CTRL3_BVALID BIT(6)
+
+struct mv_usb2_phy {
+ struct phy *phy;
+ struct platform_device *pdev;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout)
+{
+ timeout += jiffies;
+ while (time_is_after_eq_jiffies(timeout)) {
+ if ((readl(reg) & mask) == mask)
+ return true;
+ msleep(1);
+ }
+ return false;
+}
+
+static int mv_usb2_phy_28nm_init(struct phy *phy)
+{
+ struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
+ struct platform_device *pdev = mv_phy->pdev;
+ void __iomem *base = mv_phy->base;
+ u32 reg;
+ int ret;
+
+ clk_prepare_enable(mv_phy->clk);
+
+ /* PHY_28NM_PLL_REG0 */
+ reg = readl(base + PHY_28NM_PLL_REG0) &
+ ~(PHY_28NM_PLL_SELLPFR_MASK | PHY_28NM_PLL_FBDIV_MASK
+ | PHY_28NM_PLL_ICP_MASK | PHY_28NM_PLL_REFDIV_MASK);
+ writel(reg | (0x1 << PHY_28NM_PLL_SELLPFR_SHIFT
+ | 0xf0 << PHY_28NM_PLL_FBDIV_SHIFT
+ | 0x3 << PHY_28NM_PLL_ICP_SHIFT
+ | 0xd << PHY_28NM_PLL_REFDIV_SHIFT),
+ base + PHY_28NM_PLL_REG0);
+
+ /* PHY_28NM_PLL_REG1 */
+ reg = readl(base + PHY_28NM_PLL_REG1);
+ writel(reg | PHY_28NM_PLL_PU_PLL | PHY_28NM_PLL_PU_BY_REG,
+ base + PHY_28NM_PLL_REG1);
+
+ /* PHY_28NM_TX_REG0 */
+ reg = readl(base + PHY_28NM_TX_REG0) & ~PHY_28NM_TX_AMP_MASK;
+ writel(reg | PHY_28NM_TX_PU_BY_REG | 0x3 << PHY_28NM_TX_AMP_SHIFT |
+ PHY_28NM_TX_PU_ANA,
+ base + PHY_28NM_TX_REG0);
+
+ /* PHY_28NM_RX_REG0 */
+ reg = readl(base + PHY_28NM_RX_REG0) & ~PHY_28NM_RX_SQ_THRESH_MASK;
+ writel(reg | 0xa << PHY_28NM_RX_SQ_THRESH_SHIFT,
+ base + PHY_28NM_RX_REG0);
+
+ /* PHY_28NM_DIG_REG0 */
+ reg = readl(base + PHY_28NM_DIG_REG0) &
+ ~(PHY_28NM_DIG_BITSTAFFING_ERR | PHY_28NM_DIG_SYNC_ERR |
+ PHY_28NM_DIG_SQ_FILT_MASK | PHY_28NM_DIG_SQ_BLK_MASK |
+ PHY_28NM_DIG_SYNC_NUM_MASK);
+ writel(reg | (0x1 << PHY_28NM_DIG_SYNC_NUM_SHIFT |
+ PHY_28NM_PLL_LOCK_BYPASS),
+ base + PHY_28NM_DIG_REG0);
+
+ /* PHY_28NM_OTG_REG */
+ reg = readl(base + PHY_28NM_OTG_REG) | PHY_28NM_OTG_PU_OTG;
+ writel(reg & ~PHY_28NM_OTG_CONTROL_BY_PIN, base + PHY_28NM_OTG_REG);
+
+ /*
+ * Calibration Timing
+ * ____________________________
+ * CAL START ___|
+ * ____________________
+ * CAL_DONE ___________|
+ * | 400us |
+ */
+
+ /* Make sure PHY Calibration is ready */
+ if (!wait_for_reg(base + PHY_28NM_CAL_REG,
+ PHY_28NM_PLL_PLLCAL_DONE | PHY_28NM_PLL_IMPCAL_DONE,
+ HZ / 10)) {
+ dev_warn(&pdev->dev, "USB PHY PLL calibrate not done after
100mS.");
+ ret = -ETIMEDOUT;
+ goto err_clk;
+ }
+ if (!wait_for_reg(base + PHY_28NM_RX_REG1,
+ PHY_28NM_RX_SQCAL_DONE, HZ / 10)) {
+ dev_warn(&pdev->dev, "USB PHY RX SQ calibrate not done after
100mS.");
+ ret = -ETIMEDOUT;
+ goto err_clk;
+ }
+ /* Make sure PHY PLL is ready */
+ if (!wait_for_reg(base + PHY_28NM_PLL_REG0,
+ PHY_28NM_PLL_READY, HZ / 10)) {
+ dev_warn(&pdev->dev, "PLL_READY not set after 100mS.");
+ ret = -ETIMEDOUT;
+ goto err_clk;
+ }
+
+ return 0;
+err_clk:
+ clk_disable_unprepare(mv_phy->clk);
+ return ret;
+}
+
+static int mv_usb2_phy_28nm_power_on(struct phy *phy)
+{
+ struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
+ void __iomem *base = mv_phy->base;
+
+ writel(readl(base + PHY_28NM_CTRL_REG3) |
+ (PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID |
+ PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID),
+ base + PHY_28NM_CTRL_REG3);
+
+ return 0;
+}
+
+static int mv_usb2_phy_28nm_power_off(struct phy *phy)
+{
+ struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
+ void __iomem *base = mv_phy->base;
+
+ writel(readl(base + PHY_28NM_CTRL_REG3) |
+ ~(PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID
+ | PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID),
+ base + PHY_28NM_CTRL_REG3);
+
+ return 0;
+}
+
+static int mv_usb2_phy_28nm_exit(struct phy *phy)
+{
+ struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
+ void __iomem *base = mv_phy->base;
+ unsigned int val;
+
+ val = readw(base + PHY_28NM_PLL_REG1);
+ val &= ~PHY_28NM_PLL_PU_PLL;
+ writew(val, base + PHY_28NM_PLL_REG1);
+
+ /* power down PHY Analog part */
+ val = readw(base + PHY_28NM_TX_REG0);
+ val &= ~PHY_28NM_TX_PU_ANA;
+ writew(val, base + PHY_28NM_TX_REG0);
+
+ /* power down PHY OTG part */
+ val = readw(base + PHY_28NM_OTG_REG);
+ val &= ~PHY_28NM_OTG_PU_OTG;
+ writew(val, base + PHY_28NM_OTG_REG);
+
+ clk_disable_unprepare(mv_phy->clk);
+ return 0;
+}
+
+static const struct phy_ops usb_ops = {
+ .init = mv_usb2_phy_28nm_init,
+ .power_on = mv_usb2_phy_28nm_power_on,
+ .power_off = mv_usb2_phy_28nm_power_off,
+ .exit = mv_usb2_phy_28nm_exit,
+ .owner = THIS_MODULE,
+};
+
+static int mv_usb2_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct mv_usb2_phy *mv_phy;
+ struct resource *r;
+
+ mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL);
+ if (!mv_phy)
+ return -ENOMEM;
+
+ mv_phy->pdev = pdev;
+
+ mv_phy->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mv_phy->clk)) {
+ dev_err(&pdev->dev, "failed to get clock.\n");
+ return PTR_ERR(mv_phy->clk);
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mv_phy->base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(mv_phy->base))
+ return PTR_ERR(mv_phy->base);
+
+ mv_phy->phy = devm_phy_create(&pdev->dev, pdev->dev.of_node, &usb_ops);
+ if (IS_ERR(mv_phy->phy))
+ return PTR_ERR(mv_phy->phy);
+
+ phy_set_drvdata(mv_phy->phy, mv_phy);
+
+ phy_provider = devm_of_phy_provider_register(&pdev->dev,
of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id mv_usbphy_dt_match[] = {
+ { .compatible = "marvell,pxa1928-usb-phy", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mv_usbphy_dt_match);
+
+static struct platform_driver mv_usb2_phy_driver = {
+ .probe = mv_usb2_phy_probe,
+ .driver = {
+ .name = "mv-usb2-phy",
+ .of_match_table = of_match_ptr(mv_usbphy_dt_match),
+ },
+};
+module_platform_driver(mv_usb2_phy_driver);
+
+MODULE_AUTHOR("Rob Herring <r...@kernel.org>");
+MODULE_DESCRIPTION("Marvell USB2 phy driver");
+MODULE_LICENSE("GPL v2");
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
