Le 03/06/2015 14:24, Alexandre Belloni a écrit : > Add a minimum Device Tree for Acme Arietta G25. > http://acme.systems/arietta > > Signed-off-by: Alexandre Belloni <[email protected]> > Cc: Sergio Tanzilli <[email protected]>
BTW Sergio, can I add your "Acked-by" tag? Bye, > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-ariettag25.dts | 79 > +++++++++++++++++++++++++++++++++++ > 2 files changed, 80 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-ariettag25.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 8c3da289a00b..b224a3a56f09 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -31,6 +31,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ > at91sam9n12ek.dtb \ > at91sam9rlek.dtb \ > at91-ariag25.dtb \ > + at91-ariettag25.dtb \ > at91-cosino_mega2560.dtb \ > at91-kizboxmini.dtb \ > at91sam9g15ek.dtb \ > diff --git a/arch/arm/boot/dts/at91-ariettag25.dts > b/arch/arm/boot/dts/at91-ariettag25.dts > new file mode 100644 > index 000000000000..c514502081d2 > --- /dev/null > +++ b/arch/arm/boot/dts/at91-ariettag25.dts > @@ -0,0 +1,79 @@ > +/* > + * Device Tree file for Arietta G25 > + * This device tree is minimal, to activate more peripherals, see: > + * http://dts.acmesystems.it/arietta/ > + */ > +/dts-v1/; > +#include "at91sam9g25.dtsi" > +/ { > + model = "Acme Systems Arietta G25"; > + compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9"; > + > + aliases { > + serial0 = &dbgu; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory { > + reg = <0x20000000 0x8000000>; > + }; > + > + clocks { > + slow_xtal { > + clock-frequency = <32768>; > + }; > + > + main_xtal { > + clock-frequency = <12000000>; > + }; > + }; > + > + ahb { > + apb { > + mmc0: mmc@f0008000 { > + pinctrl-0 = < > + &pinctrl_mmc0_slot0_clk_cmd_dat0 > + &pinctrl_mmc0_slot0_dat1_3>; > + status = "okay"; > + > + slot@0 { > + reg = <0>; > + bus-width = <4>; > + }; > + }; > + > + usb2: gadget@f803c000 { > + status = "okay"; > + }; > + > + dbgu: serial@fffff200 { > + status = "okay"; > + }; > + > + rtc@fffffeb0 { > + status = "okay"; > + }; > + }; > + > + usb0: ohci@00600000 { > + status = "okay"; > + num-ports = <3>; > + }; > + > + usb1: ehci@00700000 { > + status = "okay"; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + arietta_led { > + label = "arietta_led"; > + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ > + linux,default-trigger = "heartbeat"; > + }; > + }; > +}; > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
