On Fri, Jun 19, 2015 at 2:49 PM, Johannes Thumshirn <jthumsh...@suse.de> wrote:
> On Fri, Jun 12, 2015 at 03:12:18PM +0530, Sreekanth Reddy wrote:
>> This Patch will provide more details of the devices such as slot number,
>> enclosure logical id, enclosure level & connector name in the following
>> scenarios,
>>
>> - When end device is added in the topology,
>> - When the end device is removed from the setup,
>> - When the SCSI mid layer issues TASK ABORT/ DEVICE RESET/ TARGET RESET
>> during error handling,
>> - When any command to the device fails with Sense key Hardware error or
>> Medium error or Unit Attention,
>> - When firmware returns device error or device not ready status for the end
>> device,
>> - When a Predicted fault is detected on an end device.
>>
>> This information can be used by the user to identify the location of the
>> desired drive in the topology.
>>
>> Driver will get these information by reading the sas device page0.
>>
>> Signed-off-by: Sreekanth Reddy <sreekanth.re...@avagotech.com>
>> ---
>> drivers/scsi/mpt3sas/mpt3sas_base.h | 2 +
>> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 238
>> +++++++++++++++++++++++++++++------
>> 2 files changed, 201 insertions(+), 39 deletions(-)
>>
>> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
>> b/drivers/scsi/mpt3sas/mpt3sas_base.h
>> index b79ad4f..293ad23 100644
>> --- a/drivers/scsi/mpt3sas/mpt3sas_base.h
>> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
>> @@ -317,6 +317,8 @@ struct _sas_device {
>> u8 fast_path;
>> u8 pfa_led_on;
>> u8 pend_sas_rphy_add;
>> + u8 enclosure_level;
>> + u8 connector_name[4];
>
> Minor nit of different indent here, don't know if it is worth re-sending?
Not an Issue. I will post the next version of this patch by adjusting
this indent.
Thanks,
Sreekanth
>
> Other than that:
>
> Reviewed-by: Johannes Thumshirn <jthumsh...@suse.de>
>
> --
> Johannes Thumshirn Storage
> jthumsh...@suse.de +49 911 74053 689
> SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
> GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
> HRB 21284 (AG Nürnberg)
--
Regards,
Sreekanth
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
