The pxa3xx nand driver can optionally uses clocks if needed. Currently two clocks can be specified: 'nfc' and 'ecc'. Add the corresponding documentation.
Signed-off-by: Antoine Tenart <[email protected]> --- Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt index 4f833e3c4f51..d9aa0a6729a8 100644 --- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -11,6 +11,8 @@ Required properties: Optional properties: + - clocks: A phandle to the clocks + - clock-names: 'nfc' and 'ecc' - marvell,nand-enable-arbiter: Set to enable the bus arbiter - marvell,nand-keep-config: Set to keep the NAND controller config as set by the bootloader @@ -32,6 +34,8 @@ Example: compatible = "marvell,pxa3xx-nand"; reg = <0x43100000 90>; interrupts = <45>; + clocks = <&gateclk 11>; + clock-names = "nfc"; #address-cells = <1>; marvell,nand-enable-arbiter; -- 2.4.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
