On 07/07/15 03:28, Cristian Stoica wrote:
> - to to
> - when when
>
> Signed-off-by: Cristian Stoica <[email protected]>
> ---
> Documentation/PCI/pci.txt | 2 +-
> Documentation/RCU/lockdep.txt | 4 ++--
> Documentation/cpu-freq/cpu-drivers.txt | 2 +-
> arch/arc/mm/cache.c | 2 +-
> arch/arm/mach-davinci/cp_intc.c | 2 +-
> arch/ia64/kernel/acpi.c | 2 +-
> arch/powerpc/sysdev/ppc4xx_cpm.c | 2 +-
> arch/x86/kvm/paging_tmpl.h | 2 +-
> arch/x86/mm/pgtable.c | 2 +-
> drivers/block/cciss.c | 2 +-
> drivers/block/cciss_cmd.h | 2 +-
> drivers/clk/bcm/clk-kona-setup.c | 2 +-
> drivers/crypto/n2_core.c | 2 +-
> drivers/dma/ep93xx_dma.c | 2 +-
> drivers/gpu/drm/i915/intel_panel.c | 2 +-
> drivers/gpu/drm/vmwgfx/svga_reg.h | 2 +-
> drivers/i2c/busses/Kconfig | 2 +-
> drivers/i2c/busses/i2c-cros-ec-tunnel.c | 4 ++--
> drivers/i2c/busses/i2c-viperboard.c | 2 +-
> drivers/infiniband/hw/qib/qib_pcie.c | 2 +-
> drivers/input/mouse/hgpk.c | 2 +-
> drivers/md/dm-cache-policy-mq.c | 2 +-
> drivers/mmc/core/host.c | 2 +-
> drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 2 +-
> drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 2 +-
> drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +-
> drivers/net/wireless/ath/ath10k/mac.c | 2 +-
> drivers/net/wireless/ath/ath10k/testmode.c | 4 ++--
> drivers/net/wireless/ath/ath9k/hw.h | 2 +-
> drivers/net/wireless/brcm80211/brcmsmac/types.h | 4 ++--
> drivers/net/wireless/iwlwifi/dvm/lib.c | 2 +-
> drivers/net/wireless/iwlwifi/mvm/d3.c | 2 +-
> drivers/net/wireless/iwlwifi/mvm/fw-api-power.h | 2 +-
> drivers/ps3/ps3-lpm.c | 2 +-
> drivers/scsi/hpsa.c | 2 +-
> drivers/scsi/mpt2sas/mpt2sas_base.h | 2 +-
> drivers/scsi/mpt2sas/mpt2sas_transport.c | 2 +-
> drivers/scsi/mpt3sas/mpt3sas_base.h | 2 +-
> drivers/scsi/mpt3sas/mpt3sas_transport.c | 2 +-
> drivers/scsi/snic/snic_debugfs.c | 2 +-
> drivers/staging/lustre/lustre/include/cl_object.h | 2 +-
> drivers/staging/lustre/lustre/libcfs/hash.c | 2 +-
> drivers/staging/wilc1000/host_interface.c | 2 +-
> drivers/usb/host/uhci-grlib.c | 2 +-
> drivers/usb/host/uhci-platform.c | 2 +-
> fs/btrfs/ioctl.c | 2 +-
> fs/ocfs2/refcounttree.c | 2 +-
> fs/xfs/xfs_trans_ail.c | 2 +-
> include/linux/cpufreq.h | 2 +-
> include/linux/mm.h | 2 +-
> net/mac80211/sta_info.h | 4 ++--
> net/netlink/genetlink.c | 2 +-
> net/tipc/msg.c | 2 +-
> sound/soc/tegra/tegra20_das.h | 4 ++--
> tools/perf/Documentation/perf-script-perl.txt | 2 +-
> tools/perf/Documentation/perf-script-python.txt | 2 +-
> tools/perf/util/event.h | 2 +-
> tools/testing/ktest/sample.conf | 2 +-
> tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc | 2 +-
> 59 files changed, 65 insertions(+), 65 deletions(-)
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 35ac237..cdba007 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -357,7 +357,7 @@ config I2C_AXXIA
> Say yes if you want to support the I2C bus on Axxia platforms.
>
> Please note that this controller is limited to transfers of maximum
> - 255 bytes in length. Any attempt to to a larger transfer will return
> + 255 bytes in length. Any attempt to a larger transfer will return
better:
to make a larger transfer
> an error.
>
> config I2C_BCM2835
> diff --git a/drivers/i2c/busses/i2c-viperboard.c
> b/drivers/i2c/busses/i2c-viperboard.c
> index 47e88ad..3fee025 100644
> --- a/drivers/i2c/busses/i2c-viperboard.c
> +++ b/drivers/i2c/busses/i2c-viperboard.c
> @@ -323,7 +323,7 @@ static int vprbrd_i2c_xfer(struct i2c_adapter *i2c,
> struct i2c_msg *msgs,
> amsg->addr = pmsg->addr;
> amsg->unknown1 = 0x00;
> amsg->len = cpu_to_le16(pmsg->len);
> - /* send the addr, the data goes to to board */
> + /* send the addr, the data goes to board */
maybe: to the board */
> ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
> if (ret < 0)
> error = ret;
> diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
> index 1dafeb4..1d65288 100644
> --- a/drivers/scsi/hpsa.c
> +++ b/drivers/scsi/hpsa.c
> @@ -8309,7 +8309,7 @@ static int hpsa_enter_performant_mode(struct ctlr_info
> *h, u32 trans_support)
> struct access_method access = SA5_performant_access;
>
> /* This is a bit complicated. There are 8 registers on
> - * the controller which we write to to tell it 8 different
> + * the controller which we write to tell it 8 different
Note that this "to to" is OK as is, but changing it is also OK.
Same for a similar patch (which I have already elided).
> * sizes of commands which there may be. It's a way of
> * reducing the DMA done to fetch each command. Encoded into
> * each command's tag are 3 bits which communicate to the controller
> diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h
> b/drivers/scsi/mpt2sas/mpt2sas_base.h
> index caff8d1..565469b 100644
> --- a/drivers/scsi/mpt2sas/mpt2sas_base.h
> +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
> @@ -506,7 +506,7 @@ struct _sas_node {
> /**
> * enum reset_type - reset state
> * @FORCE_BIG_HAMMER: issue diagnostic reset
> - * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
> + * @SOFT_RESET: issue message_unit_reset, if fails to big hammer
I don't understand that description before or after the change.
Not your problem though.
> */
> enum reset_type {
> FORCE_BIG_HAMMER,
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
> b/drivers/scsi/mpt3sas/mpt3sas_base.h
> index afa8816..c1a6d6c 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.h
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
> @@ -430,7 +430,7 @@ struct _sas_node {
> /**
> * enum reset_type - reset state
> * @FORCE_BIG_HAMMER: issue diagnostic reset
> - * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
> + * @SOFT_RESET: issue message_unit_reset, if fails to big hammer
eh?
> */
> enum reset_type {
> FORCE_BIG_HAMMER,
--
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
