Convert the code to use GENMASK() helper instead of div_mask() macro.

Signed-off-by: Andy Shevchenko <[email protected]>
---
 drivers/clk/hisilicon/clkdivider-hi6220.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/hisilicon/clkdivider-hi6220.c 
b/drivers/clk/hisilicon/clkdivider-hi6220.c
index 113eee8..65ab03f 100644
--- a/drivers/clk/hisilicon/clkdivider-hi6220.c
+++ b/drivers/clk/hisilicon/clkdivider-hi6220.c
@@ -18,8 +18,6 @@
 #include <linux/err.h>
 #include <linux/spinlock.h>
 
-#define div_mask(width)        ((1 << (width)) - 1)
-
 /**
  * struct hi6220_clk_divider - divider clock for hi6220
  *
@@ -51,7 +49,7 @@ static unsigned long hi6220_clkdiv_recalc_rate(struct clk_hw 
*hw,
        struct hi6220_clk_divider *dclk = to_hi6220_clk_divider(hw);
 
        val = readl_relaxed(dclk->reg) >> dclk->shift;
-       val &= div_mask(dclk->width);
+       val &= GENMASK(dclk->width - 1, 0);
 
        return divider_recalc_rate(hw, parent_rate, val, dclk->table,
                                   CLK_DIVIDER_ROUND_CLOSEST);
@@ -81,7 +79,7 @@ static int hi6220_clkdiv_set_rate(struct clk_hw *hw, unsigned 
long rate,
                spin_lock_irqsave(dclk->lock, flags);
 
        data = readl_relaxed(dclk->reg);
-       data &= ~(div_mask(dclk->width) << dclk->shift);
+       data &= ~(GENMASK(dclk->width - 1, 0) << dclk->shift);
        data |= value << dclk->shift;
        data |= dclk->mask;
 
@@ -116,7 +114,7 @@ struct clk *hi6220_register_clkdiv(struct device *dev, 
const char *name,
                return ERR_PTR(-ENOMEM);
 
        /* Init the divider table */
-       max_div = div_mask(width) + 1;
+       max_div = BIT(width);
        min_div = 1;
 
        table = kcalloc(max_div + 1, sizeof(*table), GFP_KERNEL);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to