Define and use CONTROL_REGISTER_W1C_MASK to make sure that
w1c bits of usb control register do not get reset while
writing any other bit
Signed-off-by: Nikhil Badola <nikhil.bad...@freescale.com>
---
drivers/usb/host/ehci-fsl.c | 25 ++++++++++++++++---------
drivers/usb/host/ehci-fsl.h | 1 +
2 files changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 05ebe3d..202dafb 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -127,14 +127,16 @@ static int fsl_ehci_drv_probe(struct platform_device
*pdev)
/* Enable USB controller, 83xx or 8536 */
if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
- setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
+ clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
+ CONTROL_REGISTER_W1C_MASK, 0x4);
/*
* Enable UTMI phy and program PTS field in UTMI mode before asserting
* controller reset for USB Controller version 2.5
*/
if (pdata->has_fsl_erratum_a007792) {
- writel_be(CTRL_UTMI_PHY_EN, hcd->regs + FSL_SOC_USB_CTRL);
+ clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
+ CONTROL_REGISTER_W1C_MASK, CTRL_UTMI_PHY_EN);
writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
}
@@ -200,9 +202,11 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
case FSL_USB2_PHY_ULPI:
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
- clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
- setbits32(non_ehci + FSL_SOC_USB_CTRL,
- ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
+ clrbits32(non_ehci + FSL_SOC_USB_CTRL,
+ CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
+ clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+ CONTROL_REGISTER_W1C_MASK,
+ ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
}
portsc |= PORT_PTS_ULPI;
break;
@@ -216,14 +220,16 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
case FSL_USB2_PHY_UTMI_DUAL:
if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
- setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
+ clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+ CONTROL_REGISTER_W1C_MASK, UTMI_PHY_EN);
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
become stable - 10ms*/
}
/* enable UTMI PHY */
if (pdata->have_sysif_regs)
- setbits32(non_ehci + FSL_SOC_USB_CTRL,
- CTRL_UTMI_PHY_EN);
+ clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+ CONTROL_REGISTER_W1C_MASK,
+ CTRL_UTMI_PHY_EN);
portsc |= PORT_PTS_UTMI;
break;
case FSL_USB2_PHY_NONE:
@@ -245,7 +251,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
- setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
+ clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
+ CONTROL_REGISTER_W1C_MASK, USB_CTRL_USB_EN);
return 0;
}
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index dbd292e..1a8a60a 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -52,6 +52,7 @@
#define SNOOP_SIZE_2GB 0x1e
/* control Register Bit Masks */
+#define CONTROL_REGISTER_W1C_MASK 0x00020000 /* W1C: PHY_CLK_VALID */
#define ULPI_INT_EN (1<<0)
#define WU_INT_EN (1<<1)
#define USB_CTRL_USB_EN (1<<2)
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
