Make mt6311_buck_ops, mt6311_ldo_ops and mt6311_regulators const and remove
unneeded error variable in mt6311_i2c_probe().

Signed-off-by: Axel Lin <axel....@ingics.com>
---
Sorry, just found a typo on subject line, so here is a resend.
 drivers/regulator/mt6311-regulator.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/regulator/mt6311-regulator.c 
b/drivers/regulator/mt6311-regulator.c
index 096e620..2a5188b 100644
--- a/drivers/regulator/mt6311-regulator.c
+++ b/drivers/regulator/mt6311-regulator.c
@@ -41,7 +41,7 @@ static const struct regulator_linear_range buck_volt_range[] 
= {
        REGULATOR_LINEAR_RANGE(MT6311_MIN_UV, 0, 0x7f, MT6311_STEP_UV),
 };
 
-static struct regulator_ops mt6311_buck_ops = {
+static const struct regulator_ops mt6311_buck_ops = {
        .list_voltage = regulator_list_voltage_linear_range,
        .map_voltage = regulator_map_voltage_linear_range,
        .set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -52,7 +52,7 @@ static struct regulator_ops mt6311_buck_ops = {
        .is_enabled = regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops mt6311_ldo_ops = {
+static const struct regulator_ops mt6311_ldo_ops = {
        .enable = regulator_enable_regmap,
        .disable = regulator_disable_regmap,
        .is_enabled = regulator_is_enabled_regmap,
@@ -91,7 +91,7 @@ static struct regulator_ops mt6311_ldo_ops = {
        .enable_mask = MT6311_PMIC_RG_VBIASN_EN_MASK,\
 }
 
-static struct regulator_desc mt6311_regulators[] = {
+static const struct regulator_desc mt6311_regulators[] = {
        MT6311_BUCK(VDVFS),
        MT6311_LDO(VBIASN),
 };
@@ -105,15 +105,15 @@ static int mt6311_i2c_probe(struct i2c_client *i2c,
        struct regulator_config config = { };
        struct regulator_dev *rdev;
        struct regmap *regmap;
-       int error, i, ret;
+       int i, ret;
        unsigned int data;
 
        regmap = devm_regmap_init_i2c(i2c, &mt6311_regmap_config);
        if (IS_ERR(regmap)) {
-               error = PTR_ERR(regmap);
+               ret = PTR_ERR(regmap);
                dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
-                       error);
-               return error;
+                       ret);
+               return ret;
        }
 
        ret = regmap_read(regmap, MT6311_SWCID, &data);
-- 
2.1.0



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to