Hi,

> From: Andi Kleen <[EMAIL PROTECTED]>
> > > Hi,
> > > 
> > > The following patch does not use MMX regsiters so that we don't have
> > > to worry about save/restore the FPU/MMX states.
> > > 
> > > What do you think?
> > 
> > Performance will probably be bad on K7 Athlons - those have a microcoded
> > movnti which is quite slow.
> > 
> > Also BTW I don't see any code anywhere that tests the CPUID bits,
> > so your code will fail spectacularly on a PII that didn't do SSE
> > (intel user copy used to be enabled on those) 
> > 
> > One way to solve this might be to use different code using
> > alternative()
> > 
> > -Andi

The following is the almost final version of the
cache pollution aware __copy_from_user_ll() patch.

1) use sfence instruction to perform a serializing on all
store-to-memory instructions.
2) check if the cpu has the xmm2 extentions. (movnti)

I think it is a good enough to be considered into
the main line.

What do you think?

Some performance data are

Total of GLOBAL_POWER_EVENTS (CPU cycle samples)

2.6.12.4.orig    1921587
2.6.12.4.nt      1599424
1599424/1921587=83.23% (16.77% reduction)

BSQ_CACHE_REFERENCE (L3 cache miss)
2.6.12.4.orig      57427
2.6.12.4.nt        20858
20858/57427=36.32% (63.7% reduction)

L3 cache miss reduction of __copy_from_user_ll
samples  %
37408    65.1412  vmlinux                  __copy_from_user_ll
23        0.1103  vmlinux                  __copy_user_zeroing_intel_nocache
23/37408=0.061% (99.94% reduction)

Top 5 of 2.6.12.4.nt
Counted GLOBAL_POWER_EVENTS events (time during which processor is not stopped) 
with a unit mask of 0x01 (mandatory) count 100000
samples  %        app name                 symbol name
128392    8.0274  vmlinux                  __copy_user_zeroing_intel_nocache
64206     4.0143  vmlinux                  journal_add_journal_head
59746     3.7355  vmlinux                  do_get_write_access
47674     2.9807  vmlinux                  journal_put_journal_head
46021     2.8774  vmlinux                  journal_dirty_metadata
pattern9-0-cpu4-0-09011728/summary.out

Counted BSQ_CACHE_REFERENCE events (cache references seen by the bus unit) with 
a unit mask of 0x3f (multiple flags) count 3000
samples  %        app name                 symbol name
69755     4.2861  vmlinux                  __copy_user_zeroing_intel_nocache
55685     3.4215  vmlinux                  journal_add_journal_head
52371     3.2179  vmlinux                  __find_get_block
45504     2.7960  vmlinux                  journal_put_journal_head
36005     2.2123  vmlinux                  journal_stop
pattern9-0-cpu4-0-09011744/summary.out

Counted BSQ_CACHE_REFERENCE events (cache references seen by the bus unit) with 
a unit mask of 0x200 (read 3rd level cache miss) count 3000
samples  %        app name                 symbol name
1147      5.4994  vmlinux                  journal_add_journal_head
881       4.2240  vmlinux                  journal_dirty_data
872       4.1809  vmlinux                  blk_rq_map_sg
734       3.5192  vmlinux                  journal_commit_transaction
617       2.9582  vmlinux                  radix_tree_delete
pattern9-0-cpu4-0-09011731/summary.out

diff -ur linux-2.6.12.4.orig/Makefile linux-2.6.12.4.nt/Makefile
--- linux-2.6.12.4.orig/Makefile        2005-08-12 14:37:59.000000000 +0900
+++ linux-2.6.12.4.nt/Makefile  2005-08-24 17:23:57.000000000 +0900
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 12
-EXTRAVERSION = .4.orig
+EXTRAVERSION = .4.nt
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*
diff -ur linux-2.6.12.4.orig/arch/i386/lib/usercopy.c 
linux-2.6.12.4.nt/arch/i386/lib/usercopy.c
--- linux-2.6.12.4.orig/arch/i386/lib/usercopy.c        2005-08-05 
16:04:37.000000000 +0900
+++ linux-2.6.12.4.nt/arch/i386/lib/usercopy.c  2005-09-01 17:09:41.000000000 
+0900
@@ -421,6 +421,107 @@
                       : "eax", "edx", "memory");
        return size;
 }
+
+/* Non Temporal Hint version of __copy_user_zeroing_intel */
+/* It is cache aware.                                     */
+/* [EMAIL PROTECTED]                              */
+static unsigned long 
+__copy_user_zeroing_intel_nocache(void *to, const void __user *from, unsigned 
long size)
+{
+        int d0, d1;
+
+       __asm__ __volatile__(
+                      "        .align 2,0x90\n"
+                      "0:      movl 32(%4), %%eax\n"
+                      "        cmpl $67, %0\n"      
+                      "        jbe 2f\n"            
+                      "1:      movl 64(%4), %%eax\n"
+                      "        .align 2,0x90\n"     
+                      "2:      movl 0(%4), %%eax\n" 
+                      "21:     movl 4(%4), %%edx\n" 
+                      "        movnti %%eax, 0(%3)\n" 
+                      "        movnti %%edx, 4(%3)\n" 
+                      "3:      movl 8(%4), %%eax\n" 
+                      "31:     movl 12(%4),%%edx\n" 
+                      "        movnti %%eax, 8(%3)\n" 
+                      "        movnti %%edx, 12(%3)\n"
+                      "4:      movl 16(%4), %%eax\n"
+                      "41:     movl 20(%4), %%edx\n"
+                      "        movnti %%eax, 16(%3)\n"
+                      "        movnti %%edx, 20(%3)\n"
+                      "10:     movl 24(%4), %%eax\n"
+                      "51:     movl 28(%4), %%edx\n"
+                      "        movnti %%eax, 24(%3)\n"
+                      "        movnti %%edx, 28(%3)\n"
+                      "11:     movl 32(%4), %%eax\n"
+                      "61:     movl 36(%4), %%edx\n"
+                      "        movnti %%eax, 32(%3)\n"
+                      "        movnti %%edx, 36(%3)\n"
+                      "12:     movl 40(%4), %%eax\n"
+                      "71:     movl 44(%4), %%edx\n"
+                      "        movnti %%eax, 40(%3)\n"
+                      "        movnti %%edx, 44(%3)\n"
+                      "13:     movl 48(%4), %%eax\n"
+                      "81:     movl 52(%4), %%edx\n"
+                      "        movnti %%eax, 48(%3)\n"
+                      "        movnti %%edx, 52(%3)\n"
+                      "14:     movl 56(%4), %%eax\n"
+                      "91:     movl 60(%4), %%edx\n"
+                      "        movnti %%eax, 56(%3)\n"
+                      "        movnti %%edx, 60(%3)\n"
+                      "        addl $-64, %0\n"     
+                      "        addl $64, %4\n"      
+                      "        addl $64, %3\n"      
+                      "        cmpl $63, %0\n"      
+                      "        ja  0b\n"            
+                      "        sfence \n"
+                      "5:      movl  %0, %%eax\n"   
+                      "        shrl  $2, %0\n"      
+                      "        andl $3, %%eax\n"    
+                      "        cld\n"               
+                      "6:      rep; movsl\n"   
+                      "        movl %%eax,%0\n"
+                      "7:      rep; movsb\n"   
+                      "8:\n"                   
+                      ".section .fixup,\"ax\"\n"
+                      "9:      lea 0(%%eax,%0,4),%0\n" 
+                      "16:     pushl %0\n"     
+                      "        pushl %%eax\n"  
+                      "        xorl %%eax,%%eax\n"
+                      "        rep; stosb\n"   
+                      "        popl %%eax\n"   
+                      "        popl %0\n"      
+                      "        jmp 8b\n"       
+                      ".previous\n"            
+                      ".section __ex_table,\"a\"\n"
+                      "        .align 4\n"        
+                      "        .long 0b,16b\n"  
+                      "        .long 1b,16b\n"
+                      "        .long 2b,16b\n"
+                      "        .long 21b,16b\n"
+                      "        .long 3b,16b\n" 
+                      "        .long 31b,16b\n"
+                      "        .long 4b,16b\n" 
+                      "        .long 41b,16b\n"
+                      "        .long 10b,16b\n"
+                      "        .long 51b,16b\n"
+                      "        .long 11b,16b\n"
+                      "        .long 61b,16b\n"
+                      "        .long 12b,16b\n"
+                      "        .long 71b,16b\n"
+                      "        .long 13b,16b\n"
+                      "        .long 81b,16b\n"
+                      "        .long 14b,16b\n"
+                      "        .long 91b,16b\n"
+                      "        .long 6b,9b\n"  
+                      "        .long 7b,16b\n" 
+                      ".previous"              
+                      : "=&c"(size), "=&D" (d0), "=&S" (d1)
+                      :  "1"(to), "2"(from), "0"(size)
+                      : "eax", "edx", "memory");
+       return size;
+}
+
 #else
 /*
  * Leave these declared but undefined.  They should not be any references to
@@ -430,6 +531,8 @@
 __copy_user_zeroing_intel(void *to, const void __user *from, unsigned long 
size);
 unsigned long
 __copy_user_intel(void __user *to, const void *from, unsigned long size);
+unsigned long
+__copy_user_zeroing_intel_nocache(void *to, const void __user *from, unsigned 
long size);
 #endif /* CONFIG_X86_INTEL_USERCOPY */
 
 /* Generic arbitrary sized copy.  */
@@ -511,7 +614,6 @@
                : "memory");                                            \
 } while (0)
 
-
 unsigned long __copy_to_user_ll(void __user *to, const void *from, unsigned 
long n)
 {
        BUG_ON((long) n < 0);
@@ -582,6 +684,21 @@
        return n;
 }
 
+unsigned long
+__copy_from_user_ll_nocache(void *to, const void __user *from, unsigned long n)
+{
+       BUG_ON((long)n < 0);
+#ifdef CONFIG_X86_INTEL_USERCOPY
+       if ( n > 64 && cpu_has_xmm2)
+                n = __copy_user_zeroing_intel_nocache(to, from, n);
+       else
+               __copy_user_zeroing(to, from, n);
+#else
+        __copy_user_zeroing(to, from, n);
+#endif
+       return n;
+}
+
 /**
  * copy_to_user: - Copy a block of data into user space.
  * @to:   Destination address, in user space.
diff -ur linux-2.6.12.4.orig/include/asm-i386/uaccess.h 
linux-2.6.12.4.nt/include/asm-i386/uaccess.h
--- linux-2.6.12.4.orig/include/asm-i386/uaccess.h      2005-08-05 
16:04:37.000000000 +0900
+++ linux-2.6.12.4.nt/include/asm-i386/uaccess.h        2005-08-24 
18:18:57.000000000 +0900
@@ -413,6 +413,8 @@
                                const void *from, unsigned long n);
 unsigned long __must_check __copy_from_user_ll(void *to,
                                const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nocache(void *to,
+                               const void __user *from, unsigned long n);
 
 /*
  * Here we special-case 1, 2 and 4-byte copy_*_user invocations.  On a fault
@@ -502,11 +504,40 @@
 }
 
 static inline unsigned long
+__copy_from_user_inatomic_nocache(void *to, const void __user *from, unsigned 
long n)
+{
+       if (__builtin_constant_p(n)) {
+               unsigned long ret;
+
+               switch (n) {
+               case 1:
+                       __get_user_size(*(u8 *)to, from, 1, ret, 1);
+                       return ret;
+               case 2:
+                       __get_user_size(*(u16 *)to, from, 2, ret, 2);
+                       return ret;
+               case 4:
+                       __get_user_size(*(u32 *)to, from, 4, ret, 4);
+                       return ret;
+               }
+       }
+       return __copy_from_user_ll_nocache(to, from, n);
+}
+
+static inline unsigned long
 __copy_from_user(void *to, const void __user *from, unsigned long n)
 {
        might_sleep();
        return __copy_from_user_inatomic(to, from, n);
 }
+
+static inline unsigned long
+__copy_from_user_nocache(void *to, const void __user *from, unsigned long n)
+{
+       might_sleep();
+       return __copy_from_user_inatomic_nocache(to, from, n);
+}
+
 unsigned long __must_check copy_to_user(void __user *to,
                                const void *from, unsigned long n);
 unsigned long __must_check copy_from_user(void *to,
diff -ur linux-2.6.12.4.orig/mm/filemap.c linux-2.6.12.4.nt/mm/filemap.c
--- linux-2.6.12.4.orig/mm/filemap.c    2005-08-05 16:04:37.000000000 +0900
+++ linux-2.6.12.4.nt/mm/filemap.c      2005-08-16 10:16:06.000000000 +0900
@@ -1727,13 +1727,13 @@
        int left;
 
        kaddr = kmap_atomic(page, KM_USER0);
-       left = __copy_from_user_inatomic(kaddr + offset, buf, bytes);
+       left = __copy_from_user_inatomic_nocache(kaddr + offset, buf, bytes);
        kunmap_atomic(kaddr, KM_USER0);
 
        if (left != 0) {
                /* Do it the slow way */
                kaddr = kmap(page);
-               left = __copy_from_user(kaddr + offset, buf, bytes);
+               left = __copy_from_user_nocache(kaddr + offset, buf, bytes);
                kunmap(page);
        }
        return bytes - left;
@@ -1750,7 +1750,7 @@
                int copy = min(bytes, iov->iov_len - base);
 
                base = 0;
-               left = __copy_from_user_inatomic(vaddr, buf, copy);
+               left = __copy_from_user_inatomic_nocache(vaddr, buf, copy);
                copied += copy;
                bytes -= copy;
                vaddr += copy;


Regards,
  Hiro
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to