From: Seungwon Jeon <tgih....@samsung.com>

This patch introduces Exynos UFS PHY driver. This driver
supports to deal with phy calibration and power control
according to UFS host driver's behavior.

Signed-off-by: Seungwon Jeon <tgih....@samsung.com>
Signed-off-by: Alim Akhtar <alim.akh...@samsung.com>
Cc: Kishon Vijay Abraham I <kis...@ti.com>
---
 .../devicetree/bindings/phy/samsung-phy.txt        |   22 ++
 drivers/phy/Kconfig                                |    7 +
 drivers/phy/Makefile                               |    1 +
 drivers/phy/phy-exynos-ufs.c                       |  277 ++++++++++++++++++++
 drivers/phy/phy-exynos-ufs.h                       |   73 ++++++
 drivers/phy/phy-exynos7-ufs.h                      |   89 +++++++
 include/linux/phy/phy-exynos-ufs.h                 |  107 ++++++++
 7 files changed, 576 insertions(+)
 create mode 100644 drivers/phy/phy-exynos-ufs.c
 create mode 100644 drivers/phy/phy-exynos-ufs.h
 create mode 100644 drivers/phy/phy-exynos7-ufs.h
 create mode 100644 include/linux/phy/phy-exynos-ufs.h

diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt 
b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index 60c6f2a..1abe2c4 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -174,3 +174,25 @@ Example:
                usbdrdphy0 = &usb3_phy0;
                usbdrdphy1 = &usb3_phy1;
        };
+
+Samsung Exynos7 soc serise UFS PHY Controller
+---------------------------------------------
+
+UFS PHY nodes are defined to describe on-chip UFS Physical layer controllers.
+Each UFS PHY controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "samsung,exynos7-ufs-phy"
+- reg : offset and length of the UFS PHY register set;
+- reg-names : reg name(s) must be 'phy-pma';
+- #phy-cells : must be zero
+- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments
+
+Example:
+       ufs_phy: ufs-phy@0x15571800 {
+               compatible = "samsung,exynos7-ufs-phy";
+               reg = <0x15571800 0x240>;
+               reg-names = "phy-pma";
+               samsung,syscon-phandle = <&pmu_system_controller>;
+               #phy-cells = <0>;
+       };
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 6b8dd16..7449376 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -358,4 +358,11 @@ config PHY_BRCMSTB_SATA
          Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
          Likely useful only with CONFIG_SATA_BRCMSTB enabled.
 
+config PHY_EXYNOS_UFS
+       tristate "EXYNOS SoC series UFS PHY driver"
+       depends on OF && ARCH_EXYNOS
+       select GENERIC_PHY
+       help
+         Support for UFS PHY on Samsung EXYNOS chipsets.
+
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f344e1b..7a36818 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -45,3 +45,4 @@ obj-$(CONFIG_PHY_QCOM_UFS)    += phy-qcom-ufs-qmp-14nm.o
 obj-$(CONFIG_PHY_TUSB1210)             += phy-tusb1210.o
 obj-$(CONFIG_PHY_BRCMSTB_SATA)         += phy-brcmstb-sata.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)                += phy-pistachio-usb.o
+obj-$(CONFIG_PHY_EXYNOS_UFS)   += phy-exynos-ufs.o
diff --git a/drivers/phy/phy-exynos-ufs.c b/drivers/phy/phy-exynos-ufs.c
new file mode 100644
index 0000000..840375d
--- /dev/null
+++ b/drivers/phy/phy-exynos-ufs.c
@@ -0,0 +1,277 @@
+/*
+ * UFS PHY driver for Samsung EXYNOS SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <tgih....@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/phy/phy.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/iopoll.h>
+#include <linux/phy/phy-exynos-ufs.h>
+
+#include "phy-exynos-ufs.h"
+
+#define for_each_phy_lane(phy, i) \
+       for (i = 0; i < (phy)->lane_cnt; i++)
+#define for_each_phy_cfg(cfg) \
+       for (; (cfg)->id; (cfg)++)
+
+#define phy_pma_writel(phy, val, reg) \
+       writel((val), (phy)->reg_pma + (reg))
+#define phy_pma_readl(phy, reg) \
+       readl((phy)->reg_pma + (reg))
+
+#define PHY_DEF_LANE_CNT       1
+
+static inline struct exynos_ufs_phy *get_exynos_ufs_phy(struct phy *phy)
+{
+       return (struct exynos_ufs_phy *)phy_get_drvdata(phy);
+}
+
+static void exynos_ufs_phy_config(struct exynos_ufs_phy *phy,
+                       const struct exynos_ufs_phy_cfg *cfg, u8 lane)
+{
+       enum {LANE_0, LANE_1}; /* lane index */
+
+       switch (lane) {
+       case LANE_0:
+               phy_pma_writel(phy, cfg->val, cfg->off_0);
+               break;
+       case LANE_1:
+               if (cfg->id == PHY_TRSV_BLK)
+                       phy_pma_writel(phy, cfg->val, cfg->off_1);
+               break;
+       }
+}
+
+static bool match_cfg_to_pwr_mode(u8 desc, u8 required_pwr)
+{
+       if (IS_PWR_MODE_ANY(desc))
+               return true;
+
+       if (IS_PWR_MODE_HS(required_pwr) && IS_PWR_MODE_HS_ANY(desc))
+               return true;
+
+       if (COMP_PWR_MODE(required_pwr, desc))
+               return true;
+
+       if (COMP_PWR_MODE_MD(required_pwr, desc) &&
+           COMP_PWR_MODE_GEAR(required_pwr, desc) &&
+           COMP_PWR_MODE_SER(required_pwr, desc))
+               return true;
+
+       return false;
+}
+
+int exynos_ufs_phy_calibrate(struct phy *phy, enum phy_cfg_tag tag, u8 pwr)
+{
+       struct exynos_ufs_phy *ufs_phy = get_exynos_ufs_phy(phy);
+       struct exynos_ufs_phy_cfg **cfgs = ufs_phy->cfg;
+       const struct exynos_ufs_phy_cfg *cfg;
+       int i;
+
+       if (unlikely(tag < CFG_PRE_INIT || tag >= CFG_TAG_MAX)) {
+               dev_err(ufs_phy->dev, "invalid phy config index %d\n", tag);
+               return -EINVAL;
+       }
+
+       cfg = cfgs[tag];
+       if (!cfg)
+               goto out;
+
+       for_each_phy_cfg(cfg) {
+               for_each_phy_lane(ufs_phy, i) {
+                       if (match_cfg_to_pwr_mode(cfg->desc, pwr))
+                               exynos_ufs_phy_config(ufs_phy, cfg, i);
+               }
+       }
+
+out:
+       return 0;
+}
+EXPORT_SYMBOL_GPL(exynos_ufs_phy_calibrate);
+
+void exynos_ufs_phy_set_lane_cnt(struct phy *phy, u8 lane_cnt)
+{
+       struct exynos_ufs_phy *ufs_phy = get_exynos_ufs_phy(phy);
+
+       ufs_phy->lane_cnt = lane_cnt;
+}
+EXPORT_SYMBOL_GPL(exynos_ufs_phy_set_lane_cnt);
+
+int exynos_ufs_phy_wait_for_lock_acq(struct phy *phy)
+{
+       struct exynos_ufs_phy *ufs_phy = get_exynos_ufs_phy(phy);
+       const unsigned int timeout_us = 100000;
+       const unsigned int sleep_us = 10;
+       u32 val;
+       int err;
+
+       err = readl_poll_timeout(
+                       ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
+                       val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
+       if (err) {
+               dev_err(ufs_phy->dev,
+                       "failed to get phy pll lock acquisition %d\n", err);
+               goto out;
+       }
+
+       err = readl_poll_timeout(
+                       ufs_phy->reg_pma + PHY_APB_ADDR(PHY_CDR_LOCK_STATUS),
+                       val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
+       if (err) {
+               dev_err(ufs_phy->dev,
+                       "failed to get phy cdr lock acquisition %d\n", err);
+               goto out;
+       }
+
+out:
+       return err;
+}
+EXPORT_SYMBOL_GPL(exynos_ufs_phy_wait_for_lock_acq);
+
+static int exynos_ufs_phy_init(struct phy *phy)
+{
+       return 0;
+}
+
+static int exynos_ufs_phy_exit(struct phy *phy)
+{
+       return 0;
+}
+
+static inline void exynos_ufs_phy_ctrl_isol(
+               struct exynos_ufs_phy *phy, u32 isol)
+{
+       regmap_update_bits(phy->reg_pmu, phy->isol->offset,
+                       phy->isol->mask, isol ? 0 : phy->isol->en);
+}
+
+static int exynos_ufs_phy_power_on(struct phy *phy)
+{
+       struct exynos_ufs_phy *_phy = get_exynos_ufs_phy(phy);
+
+       exynos_ufs_phy_ctrl_isol(_phy, false);
+       return 0;
+}
+
+static int exynos_ufs_phy_power_off(struct phy *phy)
+{
+       struct exynos_ufs_phy *_phy = get_exynos_ufs_phy(phy);
+
+       exynos_ufs_phy_ctrl_isol(_phy, true);
+       return 0;
+}
+
+static struct phy_ops exynos_ufs_phy_ops = {
+       .init           = exynos_ufs_phy_init,
+       .exit           = exynos_ufs_phy_exit,
+       .power_on       = exynos_ufs_phy_power_on,
+       .power_off      = exynos_ufs_phy_power_off,
+       .owner          = THIS_MODULE,
+};
+
+static const struct of_device_id exynos_ufs_phy_match[];
+
+static int exynos_ufs_phy_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct resource *res;
+       const struct of_device_id *match;
+       struct exynos_ufs_phy *phy;
+       struct phy *gen_phy;
+       struct phy_provider *phy_provider;
+       const struct exynos_ufs_phy_drvdata *drvdata;
+       int err = 0;
+
+       match = of_match_node(exynos_ufs_phy_match, dev->of_node);
+       if (!match) {
+               err = -EINVAL;
+               dev_err(dev, "failed to get match_node\n");
+               goto out;
+       }
+
+       phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+       if (!phy) {
+               err = -ENOMEM;
+               dev_err(dev, "failed to allocate ufs-phy\n");
+               goto out;
+       }
+
+       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy-pma");
+       phy->reg_pma = devm_ioremap_resource(dev, res);
+       if (IS_ERR(phy->reg_pma)) {
+               err = PTR_ERR(phy->reg_pma);
+               dev_err(dev, "failed ioremap for ufs-phy pma resource\n");
+               goto out;
+       }
+
+       phy->reg_pmu = syscon_regmap_lookup_by_phandle(
+                               dev->of_node, "samsung,syscon-phandle");
+       if (IS_ERR(phy->reg_pmu)) {
+               err = PTR_ERR(phy->reg_pmu);
+               dev_err(dev, "failed syscon remap for pmu\n");
+               goto out;
+       }
+
+       gen_phy = devm_phy_create(dev, NULL, &exynos_ufs_phy_ops);
+       if (IS_ERR(gen_phy)) {
+               err = PTR_ERR(gen_phy);
+               dev_err(dev, "failed to create PHY for ufs-phy\n");
+               goto out;
+       }
+
+       phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+       if (IS_ERR(phy_provider)) {
+               err = PTR_ERR(phy_provider);
+               dev_err(dev, "failed to register phy-provider\n");
+               goto out;
+       }
+
+       drvdata = match->data;
+       phy->dev = dev;
+       phy->drvdata = drvdata;
+       phy->cfg = (struct exynos_ufs_phy_cfg **)drvdata->cfg;
+       phy->isol = &drvdata->isol;
+       phy->lane_cnt = PHY_DEF_LANE_CNT;
+
+       phy_set_drvdata(gen_phy, phy);
+
+out:
+       return err;
+}
+
+static const struct of_device_id exynos_ufs_phy_match[] = {
+       {
+               .compatible = "samsung,exynos7-ufs-phy",
+               .data = &exynos7_ufs_phy,
+       },
+       {},
+};
+MODULE_DEVICE_TABLE(of, exynos_ufs_phy_match);
+
+static struct platform_driver exynos_ufs_phy_driver = {
+       .probe  = exynos_ufs_phy_probe,
+       .driver = {
+               .name = "exynos-ufs-phy",
+               .owner = THIS_MODULE,
+               .of_match_table = exynos_ufs_phy_match,
+       },
+};
+module_platform_driver(exynos_ufs_phy_driver);
+MODULE_DESCRIPTION("EXYNOS SoC UFS PHY Driver");
+MODULE_AUTHOR("Seungwon Jeon <tgih....@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-exynos-ufs.h b/drivers/phy/phy-exynos-ufs.h
new file mode 100644
index 0000000..9a9e991
--- /dev/null
+++ b/drivers/phy/phy-exynos-ufs.h
@@ -0,0 +1,73 @@
+/*
+ * UFS PHY driver for Samsung EXYNOS SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <tgih....@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _PHY_EXYNOS_UFS_
+#define _PHY_EXYNOS_UFS_
+
+#define PHY_COMN_BLK   1
+#define PHY_TRSV_BLK   2
+#define END_UFS_PHY_CFG { 0 }
+#define PHY_TRSV_CH_OFFSET     0x30
+#define PHY_APB_ADDR(off)      ((off) << 2)
+
+#define PHY_COMN_REG_CFG(o, v, d) {    \
+       .off_0 = PHY_APB_ADDR((o)),     \
+       .off_1 = 0,             \
+       .val = (v),             \
+       .desc = (d),            \
+       .id = PHY_COMN_BLK,     \
+}
+
+#define PHY_TRSV_REG_CFG(o, v, d) {    \
+       .off_0 = PHY_APB_ADDR((o)),     \
+       .off_1 = PHY_APB_ADDR((o) + PHY_TRSV_CH_OFFSET),        \
+       .val = (v),             \
+       .desc = (d),            \
+       .id = PHY_TRSV_BLK,     \
+}
+
+/* UFS PHY registers */
+#define PHY_PLL_LOCK_STATUS    0x1e
+#define PHY_CDR_LOCK_STATUS    0x5e
+
+#define PHY_PLL_LOCK_BIT       BIT(5)
+#define PHY_CDR_LOCK_BIT       BIT(4)
+
+struct exynos_ufs_phy_cfg {
+       u32 off_0;
+       u32 off_1;
+       u32 val;
+       u8 desc;
+       u8 id;
+};
+
+struct exynos_ufs_phy_drvdata {
+       const struct exynos_ufs_phy_cfg **cfg;
+       struct pmu_isol {
+               u32 offset;
+               u32 mask;
+               u32 en;
+       } isol;
+};
+
+struct exynos_ufs_phy {
+       struct device *dev;
+       void __iomem *reg_pma;
+       void __iomem *reg_pmu;
+       const struct exynos_ufs_phy_drvdata *drvdata;
+       struct exynos_ufs_phy_cfg **cfg;
+       const struct pmu_isol *isol;
+       u8 lane_cnt;
+};
+
+#include "phy-exynos7-ufs.h"
+
+#endif /* _PHY_EXYNOS_UFS_ */
diff --git a/drivers/phy/phy-exynos7-ufs.h b/drivers/phy/phy-exynos7-ufs.h
new file mode 100644
index 0000000..6cd29d7
--- /dev/null
+++ b/drivers/phy/phy-exynos7-ufs.h
@@ -0,0 +1,89 @@
+/*
+ * UFS PHY driver for Samsung EXYNOS SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _PHY_EXYNOS7_UFS_H_
+#define _PHY_EXYNOS7_UFS_H_
+
+#include "phy-exynos-ufs.h"
+
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL        0x720
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK   0x1
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN     BIT(0)
+
+/* Calibration for phy initialization */
+static const struct exynos_ufs_phy_cfg exynos7_pre_init_cfg[] = {
+       PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
+       PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
+       PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
+       PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
+       PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
+       END_UFS_PHY_CFG
+};
+
+static const struct exynos_ufs_phy_cfg exynos7_post_init_cfg[] = {
+       END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B */
+static const struct exynos_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = {
+       PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY),
+       PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY),
+       PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY),
+       /* Setting order: 1st(0x16, 2nd(0x15) */
+       PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY),
+       PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY),
+       PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY),
+       PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY),
+       PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY),
+       PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY),
+       PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A),
+       PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B),
+       PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY),
+       PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY),
+       PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A),
+       PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B),
+       PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A),
+       PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B),
+       END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B atfer PMC */
+static const struct exynos_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = {
+       PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY),
+       PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY),
+       END_UFS_PHY_CFG
+};
+
+static const struct exynos_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = {
+       [CFG_PRE_INIT]          = exynos7_pre_init_cfg,
+       [CFG_POST_INIT]         = exynos7_post_init_cfg,
+       [CFG_PRE_PWR_HS]        = exynos7_pre_pwr_hs_cfg,
+       [CFG_POST_PWR_HS]       = exynos7_post_pwr_hs_cfg,
+};
+
+static struct exynos_ufs_phy_drvdata exynos7_ufs_phy = {
+       .cfg = exynos7_ufs_phy_cfgs,
+       .isol = {
+               .offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL,
+               .mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK,
+               .en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN,
+       },
+};
+
+#endif /* _PHY_EXYNOS7_UFS_H_ */
diff --git a/include/linux/phy/phy-exynos-ufs.h 
b/include/linux/phy/phy-exynos-ufs.h
new file mode 100644
index 0000000..0248de9
--- /dev/null
+++ b/include/linux/phy/phy-exynos-ufs.h
@@ -0,0 +1,107 @@
+/*
+ * phy-exynos-ufs.h - Header file for the UFS PHY of Exynos SoC
+ *
+ * Copyright (C) 2015 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <tgih....@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _PHY_EXYNOS_UFS_H_
+#define _PHY_EXYNOS_UFS_H_
+
+#include "phy.h"
+
+/* PHY calibration point */
+enum phy_cfg_tag {
+       CFG_PRE_INIT    = 0,
+       CFG_POST_INIT   = 1,
+       CFG_PRE_PWR_HS  = 2,
+       CFG_POST_PWR_HS = 3,
+       CFG_TAG_MAX,
+};
+
+/* description for PHY calibration */
+enum {
+       /* applicable to any */
+       PWR_DESC_ANY    = 0,
+       /* mode */
+       PWR_DESC_PWM    = 1,
+       PWR_DESC_HS     = 2,
+       /* series */
+       PWR_DESC_SER_A  = 1,
+       PWR_DESC_SER_B  = 2,
+       /* gear */
+       PWR_DESC_G1     = 1,
+       PWR_DESC_G2     = 2,
+       PWR_DESC_G3     = 3,
+       PWR_DESC_G4     = 4,
+       PWR_DESC_G5     = 5,
+       PWR_DESC_G6     = 6,
+       PWR_DESC_G7     = 7,
+       /* field mask */
+       MD_MASK         = 0x3,
+       SR_MASK         = 0x3,
+       GR_MASK         = 0x7,
+};
+
+#define PWR_MODE(g, s, m)      ((((g) & GR_MASK) << 4) |\
+                                (((s) & SR_MASK) << 2) | ((m) & MD_MASK))
+#define PWR_MODE_HS(g, s)      ((((g) & GR_MASK) << 4) |\
+                                (((s) & SR_MASK) << 2) | PWR_DESC_HS)
+#define PWR_MODE_HS_G1_ANY     PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_ANY)
+#define PWR_MODE_HS_G1_SER_A   PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G1_SER_B   PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G2_ANY     PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_ANY)
+#define PWR_MODE_HS_G2_SER_A   PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G2_SER_B   PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G3_ANY     PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_ANY)
+#define PWR_MODE_HS_G3_SER_A   PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G3_SER_B   PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_B)
+#define PWR_MODE_HS_ANY                PWR_MODE(PWR_DESC_ANY,\
+                                        PWR_DESC_ANY, PWR_DESC_HS)
+#define PWR_MODE_PWM_ANY       PWR_MODE(PWR_DESC_ANY,\
+                                        PWR_DESC_ANY, PWR_DESC_PWM)
+#define PWR_MODE_ANY           PWR_MODE(PWR_DESC_ANY,\
+                                        PWR_DESC_ANY, PWR_DESC_ANY)
+#define IS_PWR_MODE_HS(d)      (((d) & MD_MASK) == PWR_DESC_HS)
+#define IS_PWR_MODE_PWM(d)     (((d) & MD_MASK) == PWR_DESC_PWM)
+#define IS_PWR_MODE_ANY(d)     ((d) == PWR_MODE_ANY)
+#define IS_PWR_MODE_HS_ANY(d)  ((d) == PWR_MODE_HS_ANY)
+#define COMP_PWR_MODE(a, b)            ((a) == (b))
+#define COMP_PWR_MODE_GEAR(a, b)       ((((a) >> 4) & GR_MASK) == \
+                                        (((b) >> 4) & GR_MASK))
+#define COMP_PWR_MODE_SER(a, b)                ((((a) >> 2) & SR_MASK) == \
+                                        (((b) >> 2) & SR_MASK))
+#define COMP_PWR_MODE_MD(a, b)         (((a) & MD_MASK) == ((b) & MD_MASK))
+
+int exynos_ufs_phy_calibrate(struct phy *phy, enum phy_cfg_tag tag, u8 pwr);
+void exynos_ufs_phy_set_lane_cnt(struct phy *phy, u8 lane_cnt);
+int exynos_ufs_phy_wait_for_lock_acq(struct phy *phy);
+
+static inline int exynos_ufs_phy_calibrate_pre_init(struct phy *phy)
+{
+       return exynos_ufs_phy_calibrate(phy, CFG_PRE_INIT, PWR_MODE_ANY);
+}
+
+static inline int exynos_ufs_phy_calibrate_post_init(struct phy *phy)
+{
+       return exynos_ufs_phy_calibrate(phy, CFG_POST_INIT, PWR_MODE_ANY);
+}
+
+static inline int exynos_ufs_phy_calibrate_pre_pwr_hs(
+                                       struct phy *phy, u8 required_pwr)
+{
+       return exynos_ufs_phy_calibrate(phy, CFG_PRE_PWR_HS, required_pwr);
+}
+
+static inline int exynos_ufs_phy_calibrate_post_pwr_hs(
+                                       struct phy *phy, u8 required_pwr)
+{
+       return exynos_ufs_phy_calibrate(phy, CFG_POST_PWR_HS, required_pwr);
+}
+
+#endif /* _PHY_EXYNOS_UFS_H_ */
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to