> -----Original Message----- > From: Nikhil Badola [mailto:nikhil.bad...@freescale.com] > Sent: Monday, August 17, 2015 9:54 AM > To: linux-kernel@vger.kernel.org; devicet...@vger.kernel.org; linux- > u...@vger.kernel.org > Cc: ba...@ti.com; Badola Nikhil-B46172 <nikhil.bad...@freescale.com> > Subject: [PATCH 1/3][v2] Documentation: dt: dwc3: Add snps,quirk-frame- > length-adjustment property > > Add snps,quirk-frame-length-adjustment property which provides value for > post silicon frame length adjustment > > Signed-off-by: Nikhil Badola <nikhil.bad...@freescale.com> > --- > Changes for v2 > - changed quirk name as well description > > Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt > b/Documentation/devicetree/bindings/usb/dwc3.txt > index 0815eac..8c7d585 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -40,6 +40,9 @@ Optional properties: > - snps,hird-threshold: HIRD threshold > - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" > for > UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has > value 3. > + - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of > GFLADJ > + register for post-silicon frame length adjustment when the > + fladj_30mhz_sdbnd signal is invalid or incorrect. > > This is usually a subnode to DWC3 glue to which it is connected. > > -- > 2.1.0
Hi Felipe, I have incorporated the review comments provided by you. Could you please provide me review comments, if any, on this 2nd version of patch set. Thanks, Nikhil -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
