This includes one new driver: cxlflash plus the usual grab bag of
updates for the major drivers: qla2xxx, ipr, storvsc, pm80xx, hptiop,
plus a few assorted fixes. There's another tranch coming, but I want to
incubate it another few days in the checkers, plus it includes a mpt2sas
separated lifetime fix, which Avago won't get done testing until
Friday.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The Short Changelog is:
Alexey Khoroshilov (1):
bfa: fix leak of bfad_im_port_index on module unload
Arun Easi (1):
qla2xxx: Fix missing device login retries.
Bart Van Assche (11):
qla2xxx: Avoid that sparse complains about context imbalances
qla2xxx: Remove dead code
qla2xxx: Remove a superfluous test
qla2xxx: Fix sparse annotations
qla2xxx: Avoid that sparse complains about duplicate [noderef] attributes
qla2xxx: Remove __constant_ prefix
qla2xxx: Replace two macros with an inline function
qla2xxx: Remove set-but-not-used variables
qla2xxx: Declare local functions static
qla2xxx: Report both rsp_info and rsp_info_len
libfc: Fix a typo in a source code comment
Bjorn Helgaas (3):
megaraid_sas: fix whitespace errors
megaraid_sas: use dev_printk when possible
megaraid : use dev_printk when possible
Brian King (2):
ipr: Driver version 2.6.2
ipr: Endian / sparse fixes
Chad Dupuis (3):
qla2xxx: Remove decrement of sp reference count in abort handler.
qla2xxx: Do not reset ISP for error entry with an out of range handle.
qla2xxx: Do not reset adapter if SRB handle is in range.
Chris Leech (1):
iSCSI: let session recovery_tmo sysfs writes persist across recovery
Dan Carpenter (5):
aic94xx: set an error code on failure
cxlflash: shift wrapping bug in afu_link_reset()
cxlflash: off by one bug in cxlflash_show_port_status()
mptfusion: prevent some memory corruption
hpsa: fix an sprintf() overflow in the reset handler
Dilip Kumar Uppugandla (1):
qla2xxx: Return the fabric command state for non-task management requests
Don Brace (7):
hpsa: fix rmmod issues
hpsa: add in new controllers
hpsa: cleanup update scsi devices
hpsa: add PMC to copyright
hpsa: correct static checker warnings on driver init cleanup
hpsa: correct decode sense data
hpsa: Correct double unlock of mutex
Hannes Reinecke (2):
scsi: Add ALUA state change UA handling
scsi: retry MODE SENSE on unit attention
Himanshu Madhani (2):
qla2xxx: Update driver version to 8.07.00.26-k
qla2xxx: do not clear slot in outstanding cmd array
Hiral Patel (1):
qla2xxx: Do not crash system for sp ref count zero
Jack Wang (1):
MAINTAINERS: update email for pm8001
Joe Carnuccio (4):
qla2xxx: Pause risc before manipulating risc semaphore.
qla2xxx: Use ssdid to gate semaphore manipulation.
qla2xxx: Handle AEN8014 incoming port logout.
qla2xxx: Add serdes register read/write support for ISP25xx.
Joe Handzik (1):
hpsa: add sysfs entry path_info to show box and bay information
Johannes Thumshirn (2):
st: Destroy st_index_idr on module exit
mvsas: always iounmap resources
K. Y. Srinivasan (1):
storvsc: Set the error code correctly in failure conditions
Keith Mange (6):
storvsc: Allow write_same when host is windows 10
storvsc: use storage protocol version to determine storage capabilities
storvsc: use correct defaults for values determined by protocol
negotiation
storvsc: Untangle the storage protocol negotiation from the vmbus
protocol negotiation.
storvsc: Use a single value to track protocol versions
storvsc: Rather than look for sets of specific protocol versions, make
decisions based on ranges.
Kevin Barnett (1):
Change how controllers in mixed mode are handled.
Matthew R. Ochs (5):
cxlflash: Remove unused variable from queuecommand
cxlflash: Virtual LUN support
cxlflash: Superpipe support
cxlflash: Base error recovery support
cxlflash: Base support for IBM CXL Flash Adapter
Saurav Kashyap (1):
qla2xxx: Add adapter checks for FAWWN functionality.
Sawan Chandak (2):
qla2xxx: Add pci device id 0x2261.
qla2xxx: Add support to show MPI and PEP FW version for ISP27xx.
Scott Benesh (1):
hpsa: add in new offline mode
Sebastian Herbszt (1):
lpfc: Use && instead of & for boolean expression
Seymour, Shane M (2):
st: convert DRIVER_ATTR macros to DRIVER_ATTR_RO
st: convert to using driver attr groups for sysfs
Sreekanth Reddy (1):
mpt2sas, mpt3sas: Abort initialization if no memory I/O resources detected
Suresh Thiagarajan (1):
pm80xx: Added pm8006 controller support
Thadeu Lima de Souza Cascardo (1):
qla2xxx: prevent board_disable from running during EEH
Viswas G (8):
pm80xx: Bump pm80xx driver version to 0.1.38
pm80xx: Handling Invalid SSP Response frame
pm80xx: Add PORT RECOVERY TIMEOUT support
pm80xx: Remove unnecessary phy disconnect while link error
pm80xx: Fix for Incorrect DMA Unmapping of SG List
pm80xx: Update For Thermal Page Code
pm80xx: Corrected device state changes in I_T_Nexus_Reset.
pm80xx: Updated link rate
Vitaly Kuznetsov (2):
storvsc: use shost_for_each_device() instead of open coding
storvsc: be more picky about scmnd->sc_data_direction
Wen Xiong (1):
ipr: Byte swapping for device_id attribute in sysfs
jiang.bi...@zte.com.cn (1):
scsi_error: should not get sense for timeout IO in scsi error handler
linux (1):
hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media
changer
shane.seymour (1):
hpsa: fix issues with multilun devices
And the diffstat:
Documentation/ioctl/ioctl-number.txt | 1 +
Documentation/powerpc/cxlflash.txt | 318 ++++
MAINTAINERS | 2 +-
drivers/message/fusion/mptctl.c | 9 +
drivers/scsi/Kconfig | 1 +
drivers/scsi/Makefile | 1 +
drivers/scsi/aic94xx/aic94xx_init.c | 1 +
drivers/scsi/bfa/bfad_im.c | 2 +
drivers/scsi/cxlflash/Kconfig | 11 +
drivers/scsi/cxlflash/Makefile | 2 +
drivers/scsi/cxlflash/common.h | 208 +++
drivers/scsi/cxlflash/lunmgt.c | 266 +++
drivers/scsi/cxlflash/main.c | 2494 +++++++++++++++++++++++++++
drivers/scsi/cxlflash/main.h | 108 ++
drivers/scsi/cxlflash/sislite.h | 472 +++++
drivers/scsi/cxlflash/superpipe.c | 2084 ++++++++++++++++++++++
drivers/scsi/cxlflash/superpipe.h | 147 ++
drivers/scsi/cxlflash/vlun.c | 1243 +++++++++++++
drivers/scsi/cxlflash/vlun.h | 86 +
drivers/scsi/hpsa.c | 301 ++--
drivers/scsi/hpsa.h | 16 +-
drivers/scsi/hpsa_cmd.h | 10 +-
drivers/scsi/hptiop.c | 97 +-
drivers/scsi/hptiop.h | 6 +-
drivers/scsi/ipr.c | 15 +-
drivers/scsi/ipr.h | 17 +-
drivers/scsi/libfc/fc_fcp.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +-
drivers/scsi/megaraid.c | 140 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 544 +++---
drivers/scsi/megaraid/megaraid_sas_fusion.c | 95 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 16 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 16 +-
drivers/scsi/mvsas/mv_init.c | 5 +-
drivers/scsi/pm8001/pm8001_defs.h | 4 +-
drivers/scsi/pm8001/pm8001_hwi.c | 4 +
drivers/scsi/pm8001/pm8001_init.c | 5 +-
drivers/scsi/pm8001/pm8001_sas.c | 19 +-
drivers/scsi/pm8001/pm8001_sas.h | 12 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 111 +-
drivers/scsi/pm8001/pm80xx_hwi.h | 5 +-
drivers/scsi/qla2xxx/qla_attr.c | 24 +-
drivers/scsi/qla2xxx/qla_bsg.c | 7 +-
drivers/scsi/qla2xxx/qla_dbg.c | 102 +-
drivers/scsi/qla2xxx/qla_def.h | 15 +-
drivers/scsi/qla2xxx/qla_gs.c | 52 +-
drivers/scsi/qla2xxx/qla_init.c | 162 +-
drivers/scsi/qla2xxx/qla_iocb.c | 132 +-
drivers/scsi/qla2xxx/qla_isr.c | 70 +-
drivers/scsi/qla2xxx/qla_mbx.c | 80 +-
drivers/scsi/qla2xxx/qla_mid.c | 3 +-
drivers/scsi/qla2xxx/qla_mr.c | 22 +-
drivers/scsi/qla2xxx/qla_nx.c | 165 +-
drivers/scsi/qla2xxx/qla_nx2.c | 20 +-
drivers/scsi/qla2xxx/qla_nx2.h | 6 +-
drivers/scsi/qla2xxx/qla_os.c | 41 +-
drivers/scsi/qla2xxx/qla_sup.c | 14 +-
drivers/scsi/qla2xxx/qla_target.c | 139 +-
drivers/scsi/qla2xxx/qla_tmpl.c | 27 +-
drivers/scsi/qla2xxx/qla_version.h | 2 +-
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 6 +
drivers/scsi/scsi_error.c | 9 +
drivers/scsi/scsi_lib.c | 11 +-
drivers/scsi/scsi_transport_iscsi.c | 11 +-
drivers/scsi/st.c | 83 +-
drivers/scsi/storvsc_drv.c | 224 ++-
include/scsi/scsi_device.h | 3 +-
include/scsi/scsi_transport_iscsi.h | 1 +
include/uapi/scsi/Kbuild | 1 +
include/uapi/scsi/cxlflash_ioctl.h | 174 ++
70 files changed, 9177 insertions(+), 1327 deletions(-)
create mode 100644 Documentation/powerpc/cxlflash.txt
create mode 100644 drivers/scsi/cxlflash/Kconfig
create mode 100644 drivers/scsi/cxlflash/Makefile
create mode 100644 drivers/scsi/cxlflash/common.h
create mode 100644 drivers/scsi/cxlflash/lunmgt.c
create mode 100644 drivers/scsi/cxlflash/main.c
create mode 100644 drivers/scsi/cxlflash/main.h
create mode 100644 drivers/scsi/cxlflash/sislite.h
create mode 100644 drivers/scsi/cxlflash/superpipe.c
create mode 100644 drivers/scsi/cxlflash/superpipe.h
create mode 100644 drivers/scsi/cxlflash/vlun.c
create mode 100644 drivers/scsi/cxlflash/vlun.h
create mode 100644 include/uapi/scsi/cxlflash_ioctl.h
James
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
