On 09/08/2015 01:17 AM, Chunfeng Yun wrote:
> add a DT binding documentation of usb3.0 phy for MT65xx
> SoCs from Mediatek.
>
> Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
One comment, otherwise:
Acked-by: Rob Herring <r...@kernel.org>
> ---
> .../devicetree/bindings/phy/phy-mt65xx-usb.txt | 69
> ++++++++++++++++++++++
> 1 file changed, 69 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
> b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
> new file mode 100644
> index 0000000..5812d20
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
> @@ -0,0 +1,69 @@
> +mt65xx USB3.0 PHY binding
> +--------------------------
> +
> +This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
> +
> +Required properties (controller (parent) node):
> + - compatible : should be "mediatek,mt8173-u3phy"
> + - reg : offset and length of register for phy, exclude port's
> + register.
> + - clocks : a list of phandle + clock-specifier pairs, one for each
> + entry in clock-names
> + - clock-names : must contain
> + "u3phya_ref": for reference clock of usb3.0 analog phy.
> +
> +Required nodes : a sub-node is required for each port the controller
> + provides. Address range information including the usual
> + 'reg' property is used inside these nodes to describe
> + the controller's topology. These nodes are translated
> + by the driver's .xlate() function.
The last sentence is Linux specific. Please remove.
> +
> +Required properties (port (child) node):
> +- reg : address and length of the register set for the port.
> +- #phy-cells : should be 1 (See second example)
> + cell after port phandle is phy type from:
> + - PHY_TYPE_USB2
> + - PHY_TYPE_USB3
> +
> +Example:
> +
> +u3phy: usb-phy@11290000 {
> + compatible = "mediatek,mt8173-u3phy";
> + reg = <0 0x11290000 0 0x800>;
> + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
> + clock-names = "u3phya_ref";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "okay";
> +
> + phy_port0: port@11290800 {
> + reg = <0 0x11290800 0 0x800>;
> + #phy-cells = <1>;
> + status = "okay";
> + };
> +
> + phy_port1: port@11291000 {
> + reg = <0 0x11291000 0 0x800>;
> + #phy-cells = <1>;
> + status = "okay";
> + };
> +};
> +
> +Specifying phy control of devices
> +---------------------------------
> +
> +Device nodes should specify the configuration required in their "phys"
> +property, containing a phandle to the phy port node and a device type;
> +phy-names for each port are optional.
> +
> +Example:
> +
> +#include <dt-bindings/phy/phy.h>
> +
> +usb30: usb@11270000 {
> + ...
> + phys = <&phy_port0 PHY_TYPE_USB3>;
> + phy-names = "usb3-0";
> + ...
> +};
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
