Hi all, please ignore this patch, some garbage slipt in it. I will send a proper one in a few minute
Sorry for the noise Gregory On ven., oct. 16 2015, Gregory CLEMENT <[email protected]> wrote: > The second macb is present on all sama5d4 soc. Let's add a node > reflecting it in the device tree. > > Signed-off-by: Gregory CLEMENT <[email protected]> > --- > arch/arm/boot/dts/at91-vinco.dts | 5 +---- > arch/arm/boot/dts/sama5d4.dtsi | 30 ++++++++++++++++++++++++++++++ > 2 files changed, 31 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/at91-vinco.dts > b/arch/arm/boot/dts/at91-vinco.dts > index b8036f5..2215e2e 100644 > --- a/arch/arm/boot/dts/at91-vinco.dts > +++ b/arch/arm/boot/dts/at91-vinco.dts > @@ -82,10 +82,7 @@ > apb { > > adc0: adc@fc034000 { > - /* The vref depends on JP22 of EK. If connect > 1-2 then use 3.3V. connect 2-3 use 3.0V */ > - atmel,adc-vref = <3300>; > - /*atmel,adc-ts-wires = <4>;*/ /* Set up ADC > touch screen */ > - status = "okay"; /* Enable ADC > IIO support */ > + status = "okay"; /* Enable ADC IIO support */ > }; > > mmc0: mmc@f8000000 { > diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi > index b5ee947..6f27915 100644 > --- a/arch/arm/boot/dts/sama5d4.dtsi > +++ b/arch/arm/boot/dts/sama5d4.dtsi > @@ -1188,6 +1188,19 @@ > clock-names = "t0_clk", "slow_clk"; > }; > > + macb1: ethernet@fc028000 { > + compatible = "atmel,sama5d4-gem"; > + reg = <0xfc028000 0x100>; > + interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_macb1_rmii>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&macb1_clk>, <&macb1_clk>; > + clock-names = "hclk", "pclk"; > + status = "disabled"; > + }; > + > adc0: adc@fc034000 { > compatible = "atmel,at91sam9x5-adc"; > reg = <0xfc034000 0x100>; > @@ -1635,6 +1648,23 @@ > }; > }; > > + macb1 { > + pinctrl_macb1_rmii: macb1_rmii-0 { > + atmel,pins = > + <AT91_PIOA 14 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX0 */ > + AT91_PIOA 15 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX1 */ > + AT91_PIOA 12 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX0 */ > + AT91_PIOA 13 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX1 */ > + AT91_PIOA 10 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXDV */ > + AT91_PIOA 11 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXER */ > + AT91_PIOA 4 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXEN */ > + AT91_PIOA 2 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXCK */ > + AT91_PIOA 22 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDC */ > + AT91_PIOA 23 > AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDIO */ > + >; > + }; > + }; > + > mmc0 { > pinctrl_mmc0_clk_cmd_dat0: > mmc0_clk_cmd_dat0 { > atmel,pins = > -- > 2.1.4 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
