Implement support for the following device-tree and ACPI 5.1 DSD
properties in the goodix touchscreen driver:
- touchscreen-inverted-x: X axis is inverted (boolean)
- touchscreen-inverted-y: Y axis is inverted (boolean)
- touchscreen-swapped-x-y: X and Y axis are swapped (boolean)
These are necessary on tablets which have a display in portrait
format while the touchscreen is in landscape format, such as e.g.
the MSI Primo 81.
Signed-off-by: Karsten Merker <mer...@debian.org>
Tested-by: Bastien Nocera <had...@hadess.net>
---
drivers/input/touchscreen/goodix.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/input/touchscreen/goodix.c
b/drivers/input/touchscreen/goodix.c
index 22bfc4b..b585123 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -2,6 +2,7 @@
* Driver for Goodix Touchscreens
*
* Copyright (c) 2014 Red Hat Inc.
+ * Copyright (c) 2015 K. Merker <mer...@debian.org>
*
* This code is based on gt9xx.c authored by and...@goodix.com:
*
@@ -53,6 +54,9 @@ struct goodix_ts_data {
atomic_t open_count;
/* Protects power management calls and access to suspended flag */
struct mutex mutex;
+ bool swapped_x_y;
+ bool inverted_x;
+ bool inverted_y;
};
#define GOODIX_GPIO_INT_NAME "irq"
@@ -271,6 +275,14 @@ static void goodix_ts_report_touch(struct goodix_ts_data
*ts, u8 *coor_data)
input_y = ts->abs_y_max - input_y;
}
+ /* Inversions have to happen before axis swapping */
+ if (ts->inverted_x)
+ input_x = ts->abs_x_max - input_x;
+ if (ts->inverted_y)
+ input_y = ts->abs_y_max - input_y;
+ if (ts->swapped_x_y)
+ swap(input_x, input_y);
+
input_mt_slot(ts->input_dev, id);
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
@@ -666,6 +678,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
error);
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
+ if (ts->swapped_x_y)
+ swap(ts->abs_x_max, ts->abs_y_max);
ts->int_trigger_type = GOODIX_INT_TRIGGER;
ts->max_touch_num = GOODIX_MAX_CONTACTS;
return;
@@ -673,6 +687,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
+ if (ts->swapped_x_y)
+ swap(ts->abs_x_max, ts->abs_y_max);
ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
@@ -680,6 +696,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
"Invalid config, using defaults\n");
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
+ if (ts->swapped_x_y)
+ swap(ts->abs_x_max, ts->abs_y_max);
ts->max_touch_num = GOODIX_MAX_CONTACTS;
}
@@ -805,6 +823,13 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
{
int error;
+ ts->swapped_x_y = device_property_read_bool(&ts->client->dev,
+ "touchscreen-swapped-x-y");
+ ts->inverted_x = device_property_read_bool(&ts->client->dev,
+ "touchscreen-inverted-x");
+ ts->inverted_y = device_property_read_bool(&ts->client->dev,
+ "touchscreen-inverted-y");
+
goodix_read_config(ts);
error = goodix_request_input_dev(ts);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
