Hi, I've recently changed from RedHat 5.2 to Mandrake 6.1. I've hit a minor snag with the pcmcia-cs. I can't use both of my pc cards at the same time. I can use them individually without any problems. I can swap them without a hitch. It's just when both cards are install they both stop working. It doesn't matter which slot or what order the cards are installed. As soon as cardmgr acknoledges both cards they stop working completely. I'm using the 2.2.13-7/mdk kernel with pcmcia-cs 3.1.0. I did not have this problem with RedHat with the 2.2.13 kernel and pcmcia-cs 3.0.8. The cards are a generic 56k modem and a Xircom CEM 33.6. Here is the syslog output of the pcmcia startup at boot. Apr 10 13:18:57 Belgarion pcmcia: Starting PCMCIA services: Apr 10 13:18:57 Belgarion pcmcia: modules Apr 10 13:18:57 Belgarion kernel: Linux PCMCIA Card Services 3.1.0 Apr 10 13:18:57 Belgarion kernel: kernel build: 2.2.13-7mdk #1 Wed Sep 15 18:02:18 CEST 1999 Apr 10 13:18:57 Belgarion kernel: options: [pci] [cardbus] [apm] [pnp] Apr 10 13:18:57 Belgarion kernel: PnP: PNP BIOS installation structure at 0x800f5e60 Apr 10 13:18:57 Belgarion kernel: PnP: PNP BIOS version 1.0, entry at f0000:7bb4, dseg at f0000 Apr 10 13:18:57 Belgarion kernel: Intel PCIC probe: Apr 10 13:18:57 Belgarion kernel: Cirrus PD672x ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets Apr 10 13:18:57 Belgarion kernel: host opts [0]: [ring] [65/6/3] [1/15/3] Apr 10 13:18:57 Belgarion kernel: host opts [1]: [ring] [65/6/3] [1/15/3] Apr 10 13:18:57 Belgarion kernel: ISA irqs (default) = 3,4,5,7,9,10,11,12 polling interval = 1000 ms Apr 10 13:18:57 Belgarion pcmcia: cardmgr. Apr 10 13:18:57 Belgarion cardmgr[323]: starting, version is 3.1.0 Apr 10 13:18:57 Belgarion cardmgr[323]: watching 2 sockets Apr 10 13:18:57 Belgarion kernel: cs: IO port probe 0x1000-0x17ff: clean. Apr 10 13:18:57 Belgarion kernel: cs: IO port probe 0x0100-0x04ff: clean. Apr 10 13:18:58 Belgarion kernel: cs: IO port probe 0x0a00-0x0aff: clean. Apr 10 13:18:58 Belgarion cardmgr[323]: initializing socket 0 Apr 10 13:18:58 Belgarion kernel: cs: memory probe 0x0d0000-0x0dffff: clean. Apr 10 13:18:58 Belgarion cardmgr[323]: socket 0: Xircom CEM33 Ethernet/Modem Apr 10 13:18:58 Belgarion rc: Starting pcmcia succeeded Apr 10 13:18:58 Belgarion cardmgr[323]: executing: 'insmod /lib/modules/2.2.13-7mdk/pcmcia/xirc2ps_cs.o' Apr 10 13:18:58 Belgarion kernel: xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh) Apr 10 13:18:58 Belgarion cardmgr[323]: executing: 'insmod /lib/modules/2.2.13-7 mdk/pcmcia/serial_cs.o' Apr 10 13:18:58 Belgarion kernel: eth0: Xircom: port 0x2e0, irq 3, hwaddr 00:80:C7:6A:69:BA Apr 10 13:18:58 Belgarion kernel: tty01 at 0x02f8 (irq = 3) is a 16450 Apr 10 13:18:58 Belgarion cardmgr[323]: executing: './network start eth0' Apr 10 13:18:59 Belgarion inet: inetd startup succeeded Apr 10 13:19:01 Belgarion kernel: eth0: media 10BaseT, silicon revision 1 [named and lpd startup snipped] Apr 10 13:19:03 Belgarion cardmgr[323]: executing: './serial start ttyS1' Apr 10 13:19:04 Belgarion cardmgr[323]: initializing socket 1 Apr 10 13:19:04 Belgarion cardmgr[323]: socket 1: Serial or Modem Apr 10 13:19:04 Belgarion kernel: tty00 at 0x03f8 (irq = 5) is a 16550A Apr 10 13:19:04 Belgarion cardmgr[323]: executing: './serial start ttyS0'
