On Fri, 26 May 2000, Robert L. Harris wrote:
> I've tried pcmcia-cs.3.1.1[56] on my laptop with a new xircom 10/100
> NIC card. It lights up, gives link, and configures the card just fine,
> but when I try to ping through it, I get destination unreachable. If I
> stop services, change out with my Megahertz 10mb card, and restart, it
> comes up just the same, and I can ping just fine.
>
> Thoughts?
see the Xircom pcmcia discussion list... lots of fixes, solutions, etc.
for Xircom cards:
http://www.xircom.com/cda/page/0,1298,0-0-1_20-476,00.html
this is a link from the xircom support page... click on the link for your
card in the table on the page, and you'll be redirected to:
http://pcmcia.sourceforge.org/cgi-bin/HyperNews/get/pcmcia/xircom.html
hope this helps... you'll need to read through the messages (newest are
towards the bottom)...
regards,
billy ball
>
> Robert
>
>
> :wq!
> ---------------------------------------------------------------------------
> Robert L. Harris | Micros~1 :
> Senior System Engineer | For when quality, reliability
> at RnD Consulting | and security just aren't
> \_ that important!
> DISCLAIMER:
> These are MY OPINIONS ALONE. I speak for no-one else.
> FYI:
> perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
>
>
