Hi,

with my omnibook 4150 laptop, I have a problem with my
Xircom RealPort 10/100+Modem 56 card.

Ethernet works fine, both 10 an 100. But I now have
to use the modem and that does not work :-(

Every thing seems fine, even the link to /dev/modem is created.
But I can't get the modem to work ....
The system seems to be configured with shared IRQ support.
What do I have to configure? Have I to do some setserial or so?
I use SuSE linux 6.1.

I attach some logs about IRQ, modules and dmesg.
Any suggestions?

Thanks,
Eckehard.

---------------------------------------------
part of dmesg:

PPP: version 2.3.3 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 131540k swap-space (priority -1)
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Linux PCMCIA Card Services 3.0.9
  kernel build: 2.2.5 unknown
  options:  [pci] [cardbus]
Intel PCIC probe:
  TI 1220 PCI-to-CardBus at bus 0 slot 4, mem 0x68000000, 2 sockets
    host opts [0]: [pwr save] [serial pci & irq] [no pci irq] [lat 64/32] [bus 32/34]
    host opts [1]: [pwr save] [serial pci & irq] [no pci irq] [lat 64/32] [bus 35/37]
    ISA irqs (scanned) = 3,4,7,11 status change on irq 11
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x120-0x127 0x220-0x22f 0x378-0x37f 
0x388-0x38f
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
eth0: auto negotation failed; using 10mbs
eth0: media 10BaseT, silicon revision 5
eth0: Xircom: port 0x300, irq 3, hwaddr 00:10:A4:F3:82:F1
tty03 at 0x02e8 (irq = 3) is a 16550A
cat uses obsolete /proc/pci interface

--------------------------------------------------
the interrupts:

          CPU0
  0:     424395          XT-PIC  timer
  1:       9799          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  3:          6          XT-PIC  xirc2ps_cs
  5:        936          XT-PIC  MS Sound System
  7:         12          XT-PIC  MPU-401 UART
  8:     226293          XT-PIC  rtc
 11:          4          XT-PIC  i82365
 12:      18926          XT-PIC  PS/2 Mouse
 13:          1          XT-PIC  fpu
 14:      83280          XT-PIC  ide0
 15:      11711          XT-PIC  ide1
NMI:          0



----------------------------------------------------
and the modules:

Module                  Size  Used by
xirc2ps_cs             11288   0 (unused)
vmnet                   9840   3
vmppuser                5424   0
parport_pc              4960   0 [vmppuser]
parport                 6428   0 [vmppuser parport_pc]
vmmon                  13592   0
opl3                   13228   0
opl3sa                  4180   0
sb                     31964   0 [opl3sa]
uart401                 6740   0 [opl3sa sb]
ad1848                 49072   0 [opl3sa]
midi                   27528   0 [opl3 sb uart401 ad1848]
soundbase             481092   0 [opl3 opl3sa sb uart401 ad1848 midi]
sndshield               4736   0 [opl3 opl3sa sb uart401 ad1848 midi soundbase]
serial_cs               3864   0 (unused)
ds                      6144   2 [xirc2ps_cs serial_cs]
i82365                 22572   2
pcmcia_core            41396   0 [xirc2ps_cs serial_cs ds i82365]
serial                 41940   0 (autoclean) [serial_cs]
memstat                 1352   0 (unused)


--
eckehard peter
berlin, germany
http://www.epeter.de
mailto:[EMAIL PROTECTED]


Reply via email to