Marc SCHAEFER wrote:
>
> cat /proc/scsi/scsi donne quoi?
C'est tout bon.
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: XP34550S Rev: LXY4
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST51080N Rev: 0943
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: PIONEER Model: CD-ROM DR-U24X Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: IOMEGA Model: ZIP 100 Rev: J.02
Type: Direct-Access ANSI SCSI revision: 02
> et dmesg, il voit les périphériques disque ?
Oui, c'est après qu'il y a un problème, pour lire les disques.
Qu'est-ce qui manque au noyau pour que je reçoive une telle erreur ?
ll_rw_block: Trying to read nonexistent block-device 08:00 (0)
Linux version 2.2.18pre21-idepci ([EMAIL PROTECTED]) (gcc version 2.95.2 20000220
(Debian GNU/Linux)) #1 Sat Nov 18 09:10:00 MST 2000
Detected 199906 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 398.95 BogoMIPS
Memory: 63032k/65536k available (1132k kernel code, 412k reserved, 892k data, 68k init)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
CPU: L1 I Cache: 32K L1 D Cache: 32K
CPU: AMD-K6tm w/ multimedia extensions stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xf0500
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Starting kswapd v 1.5
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 16384K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 09
PIIX4: device not capable of full native PCI mode
PIIX4: device disabled (BIOS)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x.c 16Aug00 Donald Becker and others http://www.scyld.com/network/vortex.html
pcnet32.c: PCI bios is present, checking for devices...
via-rhine.c:v1.01 2/27/99 Written by Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/via-rhine.html
VFS: Insert root floppy disk to be loaded into RAM disk and press ENTER
VFS: Disk change detected on device fd(2,0)
RAMDISK: Compressed image found at block 0
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
VFS: Disk change detected on device fd(2,0)
VFS: Can't find an ext2 filesystem on dev fd(2,0).
scsi0 : AdvanSys SCSI 3.2M: PCI Ultra 240 CDB: IO D400/F, IRQ 10
scsi : 1 host.
Vendor: QUANTUM Model: XP34550S Rev: LXY4
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST51080N Rev: 0943
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: PIONEER Model: CD-ROM DR-U24X Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Vendor: IOMEGA Model: ZIP 100 Rev: J.02
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sdc at scsi0, channel 0, id 5, lun 0
sr0: scsi3-mmc drive: 20x/20x xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.11
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8890760 [4341 MB] [4.3 GB]
Partition check:
sda:<3>ll_rw_block: Trying to read nonexistent block-device 08:00 (0)
unable to read partition table
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2109840 [1030 MB] [1.0 GB]
sdb:<3>ll_rw_block: Trying to read nonexistent block-device 08:10 (0)
unable to read partition table
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 196608 [96 MB] [0.1 GB]
sdc: Write Protect is off
sdc:<3>ll_rw_block: Trying to read nonexistent block-device 08:20 (0)
unable to read partition table
ll_rw_block: Trying to read nonexistent block-device 08:00 (0)
ll_rw_block: Trying to read nonexistent block-device 08:10 (0)
ll_rw_block: Trying to read nonexistent block-device 08:20 (0)
ll_rw_block: Trying to read nonexistent block-device 08:00 (0)
ll_rw_block: Trying to read nonexistent block-device 08:10 (0)
ll_rw_block: Trying to read nonexistent block-device 08:20 (0)
VFS: Disk change detected on device fd(2,0)
Voilà, ce sont les logs complets.
--
Marc Mongenet
--
http://www-internal.alphanet.ch/linux-leman/ avant de poser
une question.
