Hello. Please help me figure out what my problem is. No matter how I configure the system, I can't get high performance, especially on writes.
OS: Oracle Linux 8.6, 5.4.17-2136.311.6.el8uek.x86_64 Platform: Gigabyte R282-Z94 with 2x 7702 64cores AMD EPYC and 2 TB of RAM Disks: NVMe Samsung PM1733 7.68 TB What I do: vgcreate vg1 /dev/nvme0n1 /dev/nvme1n1 /dev/nvme2n1 /dev/nvme3n1 /dev/nvme4n1 lvcreate -n thin_pool_1 -L 20T vg1 /dev/nvme0n1 /dev/nvme1n1 /dev/nvme2n1 /dev/nvme3n1 -i 4 -I 4 -i4 for striping between all disks, -I4 strip size. Also I tried 8, 16, 32... In my setup I can't find a big difference. lvcreate -n pool_meta -L 15G vg1 /dev/nvme4n1 lvconvert --type thin-pool --poolmetadata vg1/pool_meta vg1/thin_pool_1 lvchange -Zn vg1/thin_pool_1 lvcreate -V 15000G --thin -n data vg1/thin_pool_1 After that I create a load using the FIO with parameters: fio --filename=/dev/mapper/vg1-data --rw=randwrite --bs=4k --name=test --numjobs=32 --iodepth=32 --random_generator=tausworthe64 --numa_cpu_nodes=0 --direct=1 I only get 40k iops, while one drive at the same load easily gives 130k iops. I have tried different block sizes, strip sizes, etc. with no result. When I look in iostat I see the load on the disk where the metadata is: 80 WMB/s, 12500 wrqm/s, 68 %wrqm I don't understand what I'm missing when configuring the system.
_______________________________________________ linux-lvm mailing list linux-lvm@redhat.com https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/