>From 3007bf0e7a00300b8b65d63957da4377e4318720 Mon Sep 17 00:00:00 2001
From: Michael Schmitz <[email protected]>
Date: Wed, 23 May 2012 20:26:46 +1200
Subject: [PATCH 08/11] [m68k] Atari: Add ISP1160 USB host controller support 
(EtherNAT)
        Kudos to David Galvez for pointing out the correct addresses!

---
 arch/m68k/Kconfig.bus    |   11 ++++++
 arch/m68k/atari/config.c |   80 ++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 89 insertions(+), 2 deletions(-)

diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index 983e176..ed5a08c 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -55,6 +55,17 @@ config ATARI_ROM_ISA
          The only driver currently using this adapter is the EtherNEC
          driver for RTL8019AS based NE2000 compatible network cards.
 
+config ATARI_USB
+       bool "Atari USB host controller support"
+       depends on ATARI
+       select USB_SUPPORT
+       select USB_ARCH_HAS_HCD
+       help
+         This option enables support for USB host controllers contained on 
+         the EtherNAT and NetUSBee cards for Atari. You will have to select
+         an appropriate HCD driver in the USB section (the ISP1160 one is 
+         the most commonly used one).
+
 config GENERIC_ISA_DMA
        def_bool ISA
 
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index adfc901..52bc0ce 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
+#include <linux/usb/isp116x.h>
 #include <linux/vt_kern.h>
 #include <linux/module.h>
 
@@ -658,12 +659,20 @@ static void atari_get_hardware_list(struct seq_file *m)
 }
 
 /*
- * MSch: initial platform device support for Atari, required for EtherNAT
+ * MSch: platform device support for Atari, required for EtherNAT and EtherNEC
+ */
+
+/*
+ * EtherNAT: Ethernet (SMC 91C111) and USB (Phillips ISP1160) adapter
  */
 
 #define ATARI_ETHERNAT_PHYS_ADDR       0x80000000
 #define ATARI_ETHERNAT_IRQ             140
 
+/*
+ * SMC 91C111 - using the smc91x module
+ */
+
 static struct resource smc91x_resources[] = {
        [0] = {
                .name   = "smc91x-regs",
@@ -686,10 +695,77 @@ static struct platform_device smc91x_device = {
        .resource       = smc91x_resources,
 };
 
+/*
+ * ISP 1160 - using the isp116x-hcd module
+ */
+
+#define ATARI_USB_PHYS_ADDR    0x80000012
+#define ATARI_USB_IRQ          139
+
+static struct resource isp1160_resources[] = {
+       [0] = {
+               .name   = "isp1160-data",
+               .start  = ATARI_USB_PHYS_ADDR,
+               .end    = ATARI_USB_PHYS_ADDR + 0x1,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .name   = "isp1160-regs",
+               .start  = ATARI_USB_PHYS_ADDR + 0x4,
+               .end    = ATARI_USB_PHYS_ADDR + 0x5,
+               .flags  = IORESOURCE_MEM,
+       },
+       [2] = {
+               .name   = "isp1160-irq",
+               .start  = ATARI_USB_IRQ,
+               .end    = ATARI_USB_IRQ,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static void isp1160_delay(struct device *dev, int delay)
+{
+       ndelay(delay);
+}
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp1160_platform_data = {
+       /* Enable internal resistors on downstream ports */
+       .sel15Kres              = 1,
+       /* On-chip overcurrent protection */
+       .oc_enable              = 1,
+       /* INT output polarity */
+       .int_act_high           = 1,
+       /* INT edge or level triggered */
+       .int_edge_triggered     = 0,
+
+       /* WAKEUP pin connected - NOT SUPPORTED  */
+       /* .remote_wakeup_connected = 0, */
+       /* Wakeup by devices on usb bus enabled */
+       .remote_wakeup_enable   = 0,
+       .delay                  = isp1160_delay,
+};
+
+static struct platform_device isp1160_device = {
+       .name           = "isp116x-hcd",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(isp1160_resources),
+       .resource       = isp1160_resources,
+       .dev                    = {
+               .platform_data  = &isp1160_platform_data,
+       },
+
+};
+
 static struct platform_device *atari_ethernat_devices[] __initdata = {
-       &smc91x_device
+       &smc91x_device,
+       &isp1160_device
 };
 
+/*
+ * EtherNEC: ISA NE2000 compatible card (i.e. Realtek 8019) via ROM-port 
adapter
+ */
+
 #define ATARI_ETHERNEC_PHYS_ADDR       0xfffa0000
 #define ATARI_ETHERNEC_BASE            0x300
 #define ATARI_ETHERNEC_IRQ             IRQ_MFP_TIMD
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to