On 12/05/19 10:41 PM, Angelo Dureghello wrote: > Signed-off-by: Angelo Dureghello <[email protected]> > --- > drivers/mmc/host/Kconfig | 13 +++++++++++++ > drivers/mmc/host/Makefile | 3 +++ > 2 files changed, 16 insertions(+) > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 0e86340536b6..91007572a097 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -220,6 +220,19 @@ config MMC_SDHCI_CNS3XXX > > If unsure, say N. > > +config MMC_SDHCI_ESDHC_MCF > + tristate "SDHCI support for the Freescale eSDHC ColdFire controller" > + depends on M5441x > + depends on MMC_SDHCI_PLTFM > + select MMC_SDHCI_IO_ACCESSORS > + help > + This selects the Freescale eSDHC/uSDHC controller support > + found on i.MX25, i.MX35 i.MX5x and i.MX6x. > + > + If you have a controller with this interface, say Y or M here. > + > + If unsure, say N. > + > config MMC_SDHCI_ESDHC_IMX > tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller" > depends on ARCH_MXC > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index 73578718f119..17c3826dfe81 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -80,6 +80,7 @@ obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o > obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o > obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o > obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o > +obj-$(CONFIG_MMC_SDHCI_ESDHC_MCF) += sdhci-esdhc-mcf.o > obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o > obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o > obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o > @@ -104,3 +105,5 @@ endif > > obj-$(CONFIG_MMC_SDHCI_XENON) += sdhci-xenon-driver.o > sdhci-xenon-driver-y += sdhci-xenon.o sdhci-xenon-phy.o > + > +CFLAGS_sdhci-esdhc-mcf.o := -DDEBUG
Leftover debugging? >
