Autoloading of Falcon IDE driver modules requires converting
these drivers to platform drivers.
Add platform device for Falcon IDE interface in Atari platform
setup code in preparation for this.
Add Falcon IDE base address in Atari hardware address header.
Signed-off-by: Michael Schmitz <schmitz...@gmail.com>
---
arch/m68k/atari/config.c | 20 ++++++++++++++++++++
arch/m68k/include/asm/atarihw.h | 6 ++++++
2 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index ca8469e..2d7133a 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -896,6 +896,21 @@ static void isp1160_delay(struct device *dev, int delay)
};
#endif
+#if IS_ENABLED(CONFIG_PATA_FALCON)
+static const struct resource atari_falconide_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = FALCON_IDE_BASE,
+ .end = FALCON_IDE_BASE+0x40,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MFP_FSCSI,
+ .end = IRQ_MFP_FSCSI,
+ },
+};
+#endif
+
int __init atari_platform_init(void)
{
int rv = 0;
@@ -939,6 +954,11 @@ int __init atari_platform_init(void)
atari_scsi_tt_rsrc, ARRAY_SIZE(atari_scsi_tt_rsrc));
#endif
+#if IS_ENABLED(CONFIG_PATA_FALCON)
+ if (ATARIHW_PRESENT(IDE))
+ platform_device_register_simple("pata_falcon", -1,
+ atari_falconide_rsrc, ARRAY_SIZE(atari_falconide_rsrc));
+#endif
return rv;
}
diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h
index 5330082..4bea923 100644
--- a/arch/m68k/include/asm/atarihw.h
+++ b/arch/m68k/include/asm/atarihw.h
@@ -813,6 +813,12 @@ struct MSTE_RTC {
#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS))
/*
+** Falcon IDE interface
+*/
+
+#define FALCON_IDE_BASE 0xfff00000
+
+/*
** EtherNAT add-on card for Falcon - combined ethernet and USB adapter
*/
--
1.7.0.4
