Hello!
On 20.06.2019 23:47, Michael Schmitz wrote:
Autoloading of Falcon IDE driver modules requires converting
these drivers to platform drivers.
Add platform device for Falcon IDE interface in Atari platform
setup code in preparation for this.
Add Falcon IDE base address in Atari hardware address header.
Signed-off-by: Michael Schmitz <schmitz...@gmail.com>
---
arch/m68k/atari/config.c | 20 ++++++++++++++++++++
arch/m68k/include/asm/atarihw.h | 6 ++++++
2 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index ca8469e..2d7133a 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -896,6 +896,21 @@ static void isp1160_delay(struct device *dev, int delay)
};
#endif
+#if IS_ENABLED(CONFIG_PATA_FALCON)
+static const struct resource atari_falconide_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = FALCON_IDE_BASE,
+ .end = FALCON_IDE_BASE+0x40,
You probably forgot to subtract 1 here...
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MFP_FSCSI,
+ .end = IRQ_MFP_FSCSI,
+ },
+};
+#endif
+
int __init atari_platform_init(void)
{
int rv = 0;
[...]
MBR, Sergei
