Hi Hans,
On Friday 11 Nov 2016 14:21:22 Hans Verkuil wrote:
> On 11/09/2016 04:44 PM, Ramesh Shanmugasundaram wrote:
> > This patch adds driver support for MAX2175 chip. This is Maxim
> > Integrated's RF to Bits tuner front end chip designed for software-defined
> > radio solutions. This driver exposes the tuner as a sub-device instance
> > with standard and custom controls to configure the device.
> >
> > Signed-off-by: Ramesh Shanmugasundaram
> > <[email protected]> ---
> >
> > .../devicetree/bindings/media/i2c/max2175.txt | 61 +
> > drivers/media/i2c/Kconfig | 4 +
> > drivers/media/i2c/Makefile | 2 +
> > drivers/media/i2c/max2175/Kconfig | 8 +
> > drivers/media/i2c/max2175/Makefile | 4 +
> > drivers/media/i2c/max2175/max2175.c | 1558 +++++++++++++++
> > drivers/media/i2c/max2175/max2175.h | 108 ++
> > 7 files changed, 1745 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/media/i2c/max2175.txt
> > create mode 100644 drivers/media/i2c/max2175/Kconfig
> > create mode 100644 drivers/media/i2c/max2175/Makefile
> > create mode 100644 drivers/media/i2c/max2175/max2175.c
> > create mode 100644 drivers/media/i2c/max2175/max2175.h
>
> <snip>
>
> > diff --git a/drivers/media/i2c/max2175/max2175.c
> > b/drivers/media/i2c/max2175/max2175.c new file mode 100644
> > index 0000000..ec45b52
> > --- /dev/null
> > +++ b/drivers/media/i2c/max2175/max2175.c
> > @@ -0,0 +1,1558 @@
>
> <snip>
>
> > +/* Read/Write bit(s) on top of regmap */
> > +static int max2175_read(struct max2175 *ctx, u8 idx, u8 *val)
> > +{
> > + u32 regval;
> > + int ret = regmap_read(ctx->regmap, idx, ®val);
> > +
> > + if (ret)
> > + v4l2_err(ctx->client, "read ret(%d): idx 0x%02x\n", ret, idx);
By the way, I think I've seen a proposal to get rid of v4l2_err() in favour of
dev_err(), was I dreaming or should this patch use dev_err() already ?
> > +
> > + *val = regval;
>
> Does regmap_read initialize regval even if it returns an error? If not,
> then I would initialize regval to 0 to prevent *val being uninitialized.
Better than that the error should be propagated to the caller and handled.
> > + return ret;
> > +}
[snip]
> > +static int max2175_band_from_freq(u32 freq)
> > +{
> > + if (freq >= 144000 && freq <= 26100000)
> > + return MAX2175_BAND_AM;
> > + else if (freq >= 65000000 && freq <= 108000000)
> > + return MAX2175_BAND_FM;
> > + else
>
> No need for these 'else' keywords.
Indeed by in my opinion they improve readability :-)
> > + return MAX2175_BAND_VHF;
> > +}
[snip]
> > +static const struct v4l2_ctrl_config max2175_na_rx_mode = {
> > + .ops = &max2175_ctrl_ops,
> > + .id = V4L2_CID_MAX2175_RX_MODE,
> > + .name = "RX MODE",
> > + .type = V4L2_CTRL_TYPE_MENU,
> > + .max = ARRAY_SIZE(max2175_ctrl_na_rx_modes) - 1,
> > + .def = 0,
> > + .qmenu = max2175_ctrl_na_rx_modes,
> > +};
>
> Please document all these controls better. This is part of the public API,
> so you need to give more information what this means exactly.
Should that go to Documentation/media/v4l-drivers/ ? If so "[PATCH v4 3/4]
v4l: Add Renesas R-Car FDP1 Driver" can be used as an example.
[snip]
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
