Hi,
I have tested http://linuxtv.org/hg/~anttip/af9015_aver_a850_2.
*It works for me !*
Here is info for Kernel changelog :
*Tested-by: Thomas Renard <thren...@gmail.com> *
I just have this error message during scan but I don't know the severity :
scan -n -o zap -p /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
> channels.conf
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 474000000 0 2 9 3 1 0 0
initial transponder 498000000 0 2 9 3 1 0 0
initial transponder 522000000 0 2 9 3 1 0 0
initial transponder 562000000 0 2 9 3 1 0 0
initial transponder 586000000 0 3 9 3 1 2 0
>>> tune to:
474000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
0x0000 0x0201: pmt_pid 0x0500 NTN -- Direct 8 (running)
0x0000 0x0203: pmt_pid 0x0502 NTN -- BFM TV (running)
...
0x0000 0x0176: pmt_pid 0x02c6 GR1 -- France � (running)
WARNING: filter timeout pid 0x0010
>>> tune to:
-10:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
*__tune_to_transponder:1483: ERROR: Setting frontend parameters failed:
22 Invalid argument*
>>> tune to:
-10:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
*__tune_to_transponder:1483: ERROR: Setting frontend parameters failed:
22 Invalid argument*
dumping lists (36 services)
Done.
Thanks for your help !
Regards,
Thomas
Antti Palosaari a écrit :
hello
waiting :) If it works add tested-by to your mail reply
Tested-by: Firsname Lastname <em...@address.com>
Then I can add that to the Kernel changelog. It is not absolutely
needed but it is nice to have some mention who has done job for patch.
Also Olivier! If you don't have nothing to send ml where attach this
tag then you can send Tested-by directly to me.
regards
Antti
Thomas RENARD wrote:
Hi Antti,
I'm working today... I'll test
http://linuxtv.org/hg/~anttip/af9015_aver_a850_2/<http://linuxtv.org/hg/%7Eanttip/af9015_aver_a850_2/>this
evening (time in Paris).
Regards,
Thomas
2009/3/31 Antti Palosaari <cr...@iki.fi>
Olivier MENUEL wrote:
Here are my tests :
http://linuxtv.org/hg/~anttip/af9015_aver_a850_2/<http://linuxtv.org/hg/%7Eanttip/af9015_aver_a850_2/>:
I found why kaffeine was not working : I needed to check all offset
checkboxes when scanning.
Like Thomas, I get these messages in /var/log/messages when
scanning or
changing channel : af9015_pid_filter_ctrl: onoff:0 (with kaffeine,
scan or
vlc)
That's normal behaviour. dvb-usb-framework calls .pid_filter_ctrl(0)
callback to ensure pid-filter is disabled. Those logs will not seen
normally
when debug-logs are disabled.
I found a weird thing though with kaffeine (that may be a wrong setting
somewhere in kaffeine though, it's the first time I use a DVB
device on
linux). If I stop kaffeine and restart it I can't access the
channels I just
scanned anymore : I get an error message :
Tuning to: NRJ12 / autocount: 0
Using DVB device 0:0 "Afatech AF9013 DVB-T"
tuning DVB-T to 498167000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
.....
Not able to lock to the signal on the given frequency
Frontend closed
Tuning delay: 1062 ms
I need to switch channels several times and eventually it works : I
can
now change channels without any problems !
But if I quit and restart kaffeine, I get the same problem again
No problem with VLC.
hmm, no idea. Sometimes I have also seen rather similar problems when
switching channels but restarting Totem solves problem.
I did full band w_scan and it founds all muxes I can receive (4xDVB-T +
1xDVB-H). I haven't tested Kaffeine.
Except that everything seems to work perfectly fine !
I'm not sure exactly what you want me to test though.
GPI01 :
Seems quite similar to previous one. Everything seems fine too
(except the
weird kaffeine issue).
In the logs I get the same message : af9015_pid_filter_ctrl: onoff:0
Finally, I tested GPI00 :
Working fine too, seems exactly like previous ones.
I hope I installed these correctly and did not mess up between the
different drivers.
Let me know if something seems weird or if you want me to test
something
else.
I'm really glad it finally works ;) Thanks a lot.
For me it seems like tuner is not connected to GPIO pin at all. I
will wait
someone else, Thomas?, will test. Testing this (af9015_aver_a850_2)
tree is
enough if it works:
http://linuxtv.org/hg/~anttip/af9015_aver_a850_2/<http://linuxtv.org/hg/%7Eanttip/af9015_aver_a850_2/>
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
