On 26.09.09 21:33, Devin Heitmueller wrote:
> On Sat, Sep 26, 2009 at 8:23 PM, Uros Vampl <mobile.leec...@gmail.com> wrote:
> > On 26.09.09 16:59, Devin Heitmueller wrote:
> >> On Fri, Sep 25, 2009 at 6:10 PM, Uros Vampl <mobile.leec...@gmail.com>
> >> wrote:
> >> > Alright, success!!!
> >> >
> >> > Since it seems everything for this tuner is set up the same as for the
> >> > Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the
> >> > same. So, like it's there for the Hauppauge, I added .mts_firmware = 1
> >> > to the definition of the hybrid XS em2882. And well, working TV audio!!
> >> >
> >> >
> >> > dmesg output this time:
> >> >
> >> > xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id
> >> > 0000000000000000.
> >> > MTS (4), id 00000000000000ff:
> >> > xc2028 4-0061: Loading firmware for type=MTS (4), id 0000000100000007.
> >> >
> >> >
> >> > So now with the attached patch, everything (analog, digital, remote)
> >> > works!
> >> >
> >> > Regards,
> >> > Uroš
> >> >
> >>
> >> Hello Uros,
> >>
> >> Please test out the following tree, which has all the relevant fixes
> >> (enabling dvb, your audio fix, proper gpio setting, etc).
> >>
> >> http://kernellabs.com/hg/~dheitmueller/misc-fixes2/
> >>
> >> If you have any trouble, please let me know. Otherwise I would like
> >> to issue a PULL request for this tree.
> >
> >
> > Hi,
> >
> > Your tree does not work, no audio. I quickly found the problem though:
> > gpio is set to default_analog, but it needs to be set to
> > hauppauge_wintv_hvr_900_analog. So I guess treating the EM2880 and
> > EM2882 as the same will not work, because they require different gpio
> > settings.
> >
> > Regards,
> > Uroš
>
> Hmm.. Interesting. That does make me wonder whether the GPIOs are
> setup for audio properly on the em2880 version of the profile, or
> whether the user in question just never tested it. I'll have to go
> back and check the USB trace.
>
> Nonetheless, I'll just check in your version of the patch, and scrap
> my version entirely for now. Could you please add your SOB to the
> patch?
>
> Thanks,
>
> Devin
Ok, here we go...
Make analog audio, dvb and the remote work on a Terratec Cinergy Hybrid
XS (em2882).
Signed-off-by: Uroš Vampl <mobile.leec...@gmail.com>
diff -r 29e4ba1a09bc linux/drivers/media/video/em28xx/em28xx-cards.c
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c Sat Sep 19 09:45:22
2009 -0300
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c Sat Sep 26 00:06:37
2009 +0200
@@ -1441,11 +1441,12 @@
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
.decoder = EM28XX_TVP5150,
-#if 0 /* FIXME: add an entry at em28xx-dvb */
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
-#endif
+ .ir_codes = &ir_codes_terratec_cinergy_xs_table,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -2119,6 +2120,7 @@
switch (dev->model) {
case EM2880_BOARD_EMPIRE_DUAL_TV:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
diff -r 29e4ba1a09bc linux/drivers/media/video/em28xx/em28xx-dvb.c
--- a/linux/drivers/media/video/em28xx/em28xx-dvb.c Sat Sep 19 09:45:22
2009 -0300
+++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c Sat Sep 26 00:06:37
2009 +0200
@@ -494,6 +494,7 @@
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
