Hi Pavel,
Please find my comments below.
On Sat, Feb 25, 2017 at 11:12:55PM +0100, Pavel Machek wrote:
> Hi!
>
> > > On Mon 2017-02-20 15:56:36, Sakari Ailus wrote:
> > > > On Mon, Feb 20, 2017 at 03:09:13PM +0200, Sakari Ailus wrote:
> > > > > I've tested ACPI, will test DT soon...
> > > >
> > > > DT case works, too (Nokia N9).
> > >
> > > Hmm. Good to know. Now to figure out how to get N900 case to work...
> > >
> > > AFAICT N9 has CSI2, not CSI1 support, right? Some of the core changes
> > > seem to be in, so I'll need to figure out which, and will still need
> > > omap3isp modifications...
> >
> > Indeed, I've only tested for CSI-2 as I have no functional CSI-1 devices.
> >
> > It's essentially the functionality in the four patches. The data-lane and
> > clock-name properties have been renamed as data-lanes and clock-lanes (i.e.
> > plural) to match the property documentation.
>
> Yes, it seems to work.
>
> Here's a patch. It has checkpatch issues, I can fix them. More
> support is needed on the ispcsiphy.c side... Could you take (fixed)
> version of this to your fwnode branch?
>
> Thanks,
> Pavel
>
>
>
>
> ---
>
> omap3isp: add support for CSI1 bus
>
> Signed-off-by: Pavel Machek <pa...@ucw.cz>
>
> diff --git a/drivers/media/platform/omap3isp/isp.c
> b/drivers/media/platform/omap3isp/isp.c
> index 245225a..4b10cfe 100644
> --- a/drivers/media/platform/omap3isp/isp.c
> +++ b/drivers/media/platform/omap3isp/isp.c
> @@ -2032,6 +2034,7 @@ static int isp_fwnode_parse(struct device *dev, struct
> fwnode_handle *fwn,
> struct v4l2_fwnode_endpoint vfwn;
> unsigned int i;
> int ret;
> + int csi1 = 0;
>
> ret = v4l2_fwnode_endpoint_parse(fwn, &vfwn);
> if (ret)
> @@ -2059,38 +2062,82 @@ static int isp_fwnode_parse(struct device *dev,
> struct fwnode_handle *fwn,
>
> case ISP_OF_PHY_CSIPHY1:
> case ISP_OF_PHY_CSIPHY2:
> - /* FIXME: always assume CSI-2 for now. */
> + switch (vfwn.bus_type) {
> + case V4L2_MBUS_CSI2:
> + dev_dbg(dev, "csi2 configuration\n");
> + csi1 = 0;
> + break;
> + case V4L2_MBUS_CCP2:
> + case V4L2_MBUS_CSI1:
> + dev_dbg(dev, "csi1 configuration\n");
> + csi1 = 1;
> + break;
> + default:
> + dev_err(dev, "unkonwn bus type\n");
> + }
> +
> switch (vfwn.base.port) {
> case ISP_OF_PHY_CSIPHY1:
> - buscfg->interface = ISP_INTERFACE_CSI2C_PHY1;
> + if (csi1)
You could compare vfwn.bus_type == V4L2_MBUS_CSI2 for this. But if you
choose the local variable, please make it bool instead.
> + buscfg->interface = ISP_INTERFACE_CCP2B_PHY1;
> + else
> + buscfg->interface = ISP_INTERFACE_CSI2C_PHY1;
> break;
> case ISP_OF_PHY_CSIPHY2:
> - buscfg->interface = ISP_INTERFACE_CSI2A_PHY2;
> + if (csi1)
> + buscfg->interface = ISP_INTERFACE_CCP2B_PHY2;
> + else
> + buscfg->interface = ISP_INTERFACE_CSI2A_PHY2;
> break;
> + default:
> + dev_err(dev, "bad port\n");
> }
> - buscfg->bus.csi2.lanecfg.clk.pos =
> vfwn.bus.mipi_csi2.clock_lane;
> - buscfg->bus.csi2.lanecfg.clk.pol =
> - vfwn.bus.mipi_csi2.lane_polarities[0];
> - dev_dbg(dev, "clock lane polarity %u, pos %u\n",
> - buscfg->bus.csi2.lanecfg.clk.pol,
> - buscfg->bus.csi2.lanecfg.clk.pos);
> -
> - for (i = 0; i < ISP_CSIPHY2_NUM_DATA_LANES; i++) {
> - buscfg->bus.csi2.lanecfg.data[i].pos =
> - vfwn.bus.mipi_csi2.data_lanes[i];
> - buscfg->bus.csi2.lanecfg.data[i].pol =
> - vfwn.bus.mipi_csi2.lane_polarities[i + 1];
> + if (csi1) {
> + buscfg->bus.ccp2.lanecfg.clk.pos =
> vfwn.bus.mipi_csi1.clock_lane;
Wrap after "="?
> + buscfg->bus.ccp2.lanecfg.clk.pol =
> + vfwn.bus.mipi_csi1.lane_polarity[0];
> + dev_dbg(dev, "clock lane polarity %u, pos %u\n",
> + buscfg->bus.ccp2.lanecfg.clk.pol,
> + buscfg->bus.ccp2.lanecfg.clk.pos);
> +
> + buscfg->bus.ccp2.lanecfg.data[0].pos = 1;
Shouldn't this be vfwn.bus.mipi_csi1.data_lane ?
> + buscfg->bus.ccp2.lanecfg.data[0].pol = 0;
And this one is vfwn.bus.mipi_csi1.lane_polarity[1] .
> +
> dev_dbg(dev, "data lane %u polarity %u, pos %u\n", i,
> - buscfg->bus.csi2.lanecfg.data[i].pol,
> - buscfg->bus.csi2.lanecfg.data[i].pos);
> + buscfg->bus.ccp2.lanecfg.data[0].pol,
> + buscfg->bus.ccp2.lanecfg.data[0].pos);
> +
> + buscfg->bus.ccp2.strobe_clk_pol =
> vfwn.bus.mipi_csi1.clock_inv;
> + buscfg->bus.ccp2.phy_layer = vfwn.bus.mipi_csi1.strobe;
> + buscfg->bus.ccp2.ccp2_mode = vfwn.bus_type ==
> V4L2_MBUS_CCP2;
The lines over 80 characters should be wrapped.
> + buscfg->bus.ccp2.vp_clk_pol = 1;
> +
> + buscfg->bus.ccp2.crc = 1;
> + } else {
> + buscfg->bus.csi2.lanecfg.clk.pos =
> vfwn.bus.mipi_csi2.clock_lane;
> + buscfg->bus.csi2.lanecfg.clk.pol =
> + vfwn.bus.mipi_csi2.lane_polarities[0];
> + dev_dbg(dev, "clock lane polarity %u, pos %u\n",
> + buscfg->bus.csi2.lanecfg.clk.pol,
> + buscfg->bus.csi2.lanecfg.clk.pos);
> +
> + for (i = 0; i < ISP_CSIPHY2_NUM_DATA_LANES; i++) {
> + buscfg->bus.csi2.lanecfg.data[i].pos =
> + vfwn.bus.mipi_csi2.data_lanes[i];
> + buscfg->bus.csi2.lanecfg.data[i].pol =
> + vfwn.bus.mipi_csi2.lane_polarities[i +
> 1];
> + dev_dbg(dev, "data lane %u polarity %u, pos
> %u\n", i,
> + buscfg->bus.csi2.lanecfg.data[i].pol,
> + buscfg->bus.csi2.lanecfg.data[i].pos);
> + }
> + /*
> + * FIXME: now we assume the CRC is always there.
> + * Implement a way to obtain this information from the
> + * sensor. Frame descriptors, perhaps?
> + */
> +
> + buscfg->bus.csi2.crc = 1;
> }
> -
> - /*
> - * FIXME: now we assume the CRC is always there.
> - * Implement a way to obtain this information from the
> - * sensor. Frame descriptors, perhaps?
> - */
> - buscfg->bus.csi2.crc = 1;
> break;
>
> default:
>
>
--
Kind regards,
Sakari Ailus
e-mail: sakari.ai...@iki.fi XMPP: sai...@retiisi.org.uk
