Dobry den! :-) > > > > Ok, I got the camera sensor to work. No subdevices support, so I don't > > > > have focus (etc) working, but that's a start. I also had to remove > > > > video-bus-switch support; but I guess it will be easier to use > > > > video-multiplexer patches... > > > > > > > > I'll have patches over weekend. > > > > > > I briefly looked at what's there --- you do miss the video nodes for the > > > non-sensor sub-devices, and they also don't show up in the media graph, > > > right? > > > > Yes. > > > > > I guess they don't end up matching in the async list. > > > > How should they get to the async list? > > The patch you referred to does that. The problem is, it does make the bus > configuration a pointer as well. There should be two patches. That's not a > lot of work to separate them though. But it should be done. > > > > > > I think we need to make the non-sensor sub-device support more generic; > > > it's not just the OMAP 3 ISP that needs it. I think we need to document > > > the property for the flash phandle as well; I can write one, or refresh > > > an existing one that I believe already exists. > > > > > > How about calling it either simply "flash" or "camera-flash"? Similarly > > > for lens: "lens" or "camera-lens". I have a vague feeling the "camera-" > > > prefix is somewhat redundant, so I'd just go for "flash" or "lens". > > > > Actually, I'd go for "flash" and "focus-coil". There may be other > > lens properties, such as zoom, mirror movement, lens identification, > > ... > > Good point. Still there may be other ways to move the lens than the voice > coil (which sure is cheap), so how about "flash" and "lens-focus"?
Ok, so something like this? (Yes, needs binding documentation and you
wanted it in the core.. can fix.)
BTW, fwnode_handle_put() seems to be missing in the success path of
isp_fwnodes_parse() -- can you check that?
Best regards,
Pavel
diff --git a/drivers/media/platform/omap3isp/isp.c
b/drivers/media/platform/omap3isp/isp.c
index c80397a..6f6fbed 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -2114,7 +2114,7 @@ static int isp_fwnode_parse(struct device *dev, struct
fwnode_handle *fwn,
buscfg->bus.ccp2.lanecfg.data[0].pol =
vfwn.bus.mipi_csi1.lane_polarity[1];
- dev_dbg(dev, "data lane %u polarity %u, pos %u\n", i,
+ dev_dbg(dev, "data lane %u polarity %u, pos %u\n", 0,
buscfg->bus.ccp2.lanecfg.data[0].pol,
buscfg->bus.ccp2.lanecfg.data[0].pos);
@@ -2162,10 +2162,64 @@ static int isp_fwnode_parse(struct device *dev, struct
fwnode_handle *fwn,
return 0;
}
+static int camera_subdev_parse(struct device *dev, struct v4l2_async_notifier
*notifier,
+ const char *key)
+{
+ struct device_node *node;
+ struct isp_async_subdev *isd;
+
+ printk("Looking for %s\n", key);
+
+ node = of_parse_phandle(dev->of_node, key, 0);
+ if (!node)
+ return 0;
+
+ printk("Having subdevice: %p\n", node);
+
+ isd = devm_kzalloc(dev, sizeof(*isd), GFP_KERNEL);
+ if (!isd)
+ return -ENOMEM;
+
+ notifier->subdevs[notifier->num_subdevs] = &isd->asd;
+
+ isd->asd.match.of.node = node;
+ if (!isd->asd.match.of.node) {
+ dev_warn(dev, "bad remote port parent\n");
+ return -EIO;
+ }
+
+ isd->asd.match_type = V4L2_ASYNC_MATCH_OF;
+ notifier->num_subdevs++;
+
+ return 0;
+}
+
+static int camera_subdevs_parse(struct device *dev, struct v4l2_async_notifier
*notifier,
+ int max)
+{
+ int res = 0;
+
+ printk("Going through camera-flashes\n");
+ if (notifier->num_subdevs < max) {
+ res = camera_subdev_parse(dev, notifier, "flash");
+ if (res)
+ return res;
+ }
+
+ if (notifier->num_subdevs < max) {
+ res = camera_subdev_parse(dev, notifier, "lens-focus");
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+
static int isp_fwnodes_parse(struct device *dev,
struct v4l2_async_notifier *notifier)
{
struct fwnode_handle *fwn = NULL;
+ int res = 0;
notifier->subdevs = devm_kcalloc(
dev, ISP_MAX_SUBDEVS, sizeof(*notifier->subdevs), GFP_KERNEL);
@@ -2199,6 +2253,15 @@ static int isp_fwnodes_parse(struct device *dev,
notifier->num_subdevs++;
}
+ /* FIXME: missing put in the success path? */
+
+ res = camera_subdevs_parse(dev, notifier, ISP_MAX_SUBDEVS);
+ if (res)
+ goto error;
+
+ if (notifier->num_subdevs == ISP_MAX_SUBDEVS) {
+ printk("isp: Maybe too many devices?\n");
+ }
return notifier->num_subdevs;
error:
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
