2018-01-12 23:14 GMT+09:00 Sylwester Nawrocki <s.nawro...@samsung.com>:
> On 01/07/2018 05:54 PM, Akinobu Mita wrote:
>> The ov9650 driver currently only supports legacy platform data probe.
>> This change adds device tree probing.
>
>> Signed-off-by: Akinobu Mita <akinobu.m...@gmail.com>
>> ---
>
>> drivers/media/i2c/ov9650.c | 130
>> ++++++++++++++++++++++++++++++++-------------
>> 1 file changed, 92 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c
>> index 69433e1..99a3eab 100644
>> --- a/drivers/media/i2c/ov9650.c
>> +++ b/drivers/media/i2c/ov9650.c
>
>> -static void __ov965x_set_power(struct ov965x *ov965x, int on)
>> +static int __ov965x_set_power(struct ov965x *ov965x, int on)
>> {
>> if (on) {
>> - ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 0);
>> - ov965x_gpio_set(ov965x->gpios[GPIO_RST], 0);
>> + int ret = clk_prepare_enable(ov965x->clk);
>
> It seems you rely on the fact clk_prepare_enable() is a nop when passed
> argument is NULL, which happens in non-DT case.
So this works fine as before in non-DT case, doesn't it?
>> + if (ret)
>> + return ret;
>> +
>> + gpiod_set_value_cansleep(ov965x->gpios[GPIO_PWDN], 0);
>> + gpiod_set_value_cansleep(ov965x->gpios[GPIO_RST], 0);
>> msleep(25);
>> } else {
>> - ov965x_gpio_set(ov965x->gpios[GPIO_RST], 1);
>> - ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 1);
>> + gpiod_set_value_cansleep(ov965x->gpios[GPIO_RST], 1);
>> + gpiod_set_value_cansleep(ov965x->gpios[GPIO_PWDN], 1);
>> +
>> + clk_disable_unprepare(ov965x->clk);
>> }
>>
>> ov965x->streaming = 0;
>> +
>> + return 0;
>> }
>
>> @@ -1408,16 +1414,17 @@ static const struct v4l2_subdev_ops
>> ov965x_subdev_ops = {
>> /*
>> * Reset and power down GPIOs configuration
>> */
>> -static int ov965x_configure_gpios(struct ov965x *ov965x,
>> - const struct ov9650_platform_data *pdata)
>> +static int ov965x_configure_gpios_pdata(struct ov965x *ov965x,
>> + const struct ov9650_platform_data *pdata)
>> {
>> int ret, i;
>> + int gpios[NUM_GPIOS];
>>
>> - ov965x->gpios[GPIO_PWDN] = pdata->gpio_pwdn;
>> - ov965x->gpios[GPIO_RST] = pdata->gpio_reset;
>> + gpios[GPIO_PWDN] = pdata->gpio_pwdn;
>> + gpios[GPIO_RST] = pdata->gpio_reset;
>>
>> for (i = 0; i < ARRAY_SIZE(ov965x->gpios); i++) {
>> - int gpio = ov965x->gpios[i];
>> + int gpio = gpios[i];
>>
>> if (!gpio_is_valid(gpio))
>> continue;
>> @@ -1427,9 +1434,30 @@ static int ov965x_configure_gpios(struct ov965x
>> *ov965x,
>> return ret;
>> v4l2_dbg(1, debug, &ov965x->sd, "set gpio %d to 1\n", gpio);
>>
>> - gpio_set_value(gpio, 1);
>> + gpio_set_value_cansleep(gpio, 1);
>> gpio_export(gpio, 0);
>> - ov965x->gpios[i] = gpio;
>> + ov965x->gpios[i] = gpio_to_desc(gpio);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int ov965x_configure_gpios(struct ov965x *ov965x)
>> +{
>> + struct device *dev = &ov965x->client->dev;
>> +
>> + ov965x->gpios[GPIO_PWDN] = devm_gpiod_get_optional(dev, "powerdown",
>> + GPIOD_OUT_HIGH);
>> + if (IS_ERR(ov965x->gpios[GPIO_PWDN])) {
>> + dev_info(dev, "can't get %s GPIO\n", "powerdown");
>> + return PTR_ERR(ov965x->gpios[GPIO_PWDN]);
>> + }
>> +
>> + ov965x->gpios[GPIO_RST] = devm_gpiod_get_optional(dev, "reset",
>> + GPIOD_OUT_HIGH);
>> + if (IS_ERR(ov965x->gpios[GPIO_RST])) {
>> + dev_info(dev, "can't get %s GPIO\n", "reset");
>> + return PTR_ERR(ov965x->gpios[GPIO_RST]);
>> }
>>
>> return 0;
>> @@ -1443,7 +1471,10 @@ static int ov965x_detect_sensor(struct v4l2_subdev
>> *sd)
>> int ret;
>>
>> mutex_lock(&ov965x->lock);
>> - __ov965x_set_power(ov965x, 1);
>> + ret = __ov965x_set_power(ov965x, 1);
>> + if (ret)
>> + goto out;
>> +
>> msleep(25);
>>
>> /* Check sensor revision */
>> @@ -1463,6 +1494,7 @@ static int ov965x_detect_sensor(struct v4l2_subdev *sd)
>> ret = -ENODEV;
>> }
>> }
>> +out:
>> mutex_unlock(&ov965x->lock);
>>
>> return ret;
>> @@ -1476,23 +1508,39 @@ static int ov965x_probe(struct i2c_client *client,
>> struct ov965x *ov965x;
>> int ret;
>>
>> - if (!pdata) {
>> - dev_err(&client->dev, "platform data not specified\n");
>> - return -EINVAL;
>> - }
>> -
>> - if (pdata->mclk_frequency == 0) {
>> - dev_err(&client->dev, "MCLK frequency not specified\n");
>> - return -EINVAL;
>> - }
>> -
>> ov965x = devm_kzalloc(&client->dev, sizeof(*ov965x), GFP_KERNEL);
>> if (!ov965x)
>> return -ENOMEM;
>>
>> - mutex_init(&ov965x->lock);
>
> I would leave mutex initialization as first thing after the private data
> structure allocation, is there a need to move it further?
Yes, there is. This enables to reduce several lines in clk and gpio
initialization.
For example,
if (IS_ERR(ov965x->clk)) {
ret = PTR_ERR(ov965x->clk);
goto err_mutex;
}
vs.
if (IS_ERR(ov965x->clk))
return PTR_ERR(ov965x->clk);
>> ov965x->client = client;
>> - ov965x->mclk_frequency = pdata->mclk_frequency;
>> +
>> + if (pdata) {
>> + if (pdata->mclk_frequency == 0) {
>> + dev_err(&client->dev, "MCLK frequency not
>> specified\n");
>> + return -EINVAL;
>> + }
>> + ov965x->mclk_frequency = pdata->mclk_frequency;
>> +
>> + ret = ov965x_configure_gpios_pdata(ov965x, pdata);
>> + if (ret < 0)
>> + return ret;
>> + } else if (dev_fwnode(&client->dev)) {
>> + ov965x->clk = devm_clk_get(&ov965x->client->dev, NULL);
>> + if (IS_ERR(ov965x->clk))
>> + return PTR_ERR(ov965x->clk);
>> + ov965x->mclk_frequency = clk_get_rate(ov965x->clk);
>> +
>> + ret = ov965x_configure_gpios(ov965x);
>> + if (ret < 0)
>> + return ret;
>> + } else {
>> + dev_err(&client->dev,
>> + "Neither platform data nor device property
>> specified\n");
>> +
>> + return -EINVAL;
>> + }
>> +
>> + mutex_init(&ov965x->lock);
>>
>> sd = &ov965x->sd;
>> v4l2_i2c_subdev_init(sd, client, &ov965x_subdev_ops);
>> @@ -1502,10 +1550,6 @@ static int ov965x_probe(struct i2c_client *client,
>> sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
>> V4L2_SUBDEV_FL_HAS_EVENTS;
>>
>> - ret = ov965x_configure_gpios(ov965x, pdata);
>> - if (ret < 0)
>> - goto err_mutex;
>> -
>> ov965x->pad.flags = MEDIA_PAD_FL_SOURCE;
>> sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
>> ret = media_entity_pads_init(&sd->entity, 1, &ov965x->pad);
>> @@ -1561,9 +1605,19 @@ static const struct i2c_device_id ov965x_id[] = {
>> };
>> MODULE_DEVICE_TABLE(i2c, ov965x_id);
>>
>> +#if IS_ENABLED(CONFIG_OF)
>
> Is there any advantage in using IS_ENABLED() rather than just
> #ifdef CONFIG_OF ? of_match_ptr() is defined with just #idef CONFIG_OF/
> #else/#endif. I would use simply #ifdef CONFIG_OF here.
There is no difference between these in this context.
I think it doesn't look too strange because ov2659, ov5647, and ov7670
also do like this.
> Otherwise looks good.
>
> Reviewed-by: Sylwester Nawrocki <s.nawro...@samsung.com>
Thanks for your review.
