Guillem Aranda wrote:
Sorry for the noise,

The sooner I wrote the email, the sooner my TeviiS470 started to work!

I did it work with the latest s2-liplianin tip, of course firmwares were in /lib/firmware dir.

Now I'm doing some compatibility tests. As I said I can get a few less channels than with the saa7164 that I'm using in old computers.

My aim is to certify it for the company I work for, so if there is something I could do testing it to help the community, I could do it during my work journey.

regards,

Guillem


On Thu, Dec 10, 2009 at 7:35 PM, Igor M. Liplianin <liplia...@me.by <mailto:liplia...@me.by>> wrote:

    On 10 декабря 2009 18:47:09 Guillem Solà wrote:
    > Hi,
    >
    > I come to this list as my last resort. I have two DVB-S PCIE
    cards and
    > no one can get channels, but I have another computer with a PCI
    SAA7146
    > that can get 1400 services from same dish.
    >
    > * Tveii S470 *
    >
    > One is the Tveii S470. I guess that the S470 should work because
    you are
    > working in IR support.
    >
    > I have tried V4L tip, drivers from website, from website and patched
    > like in wiki says... but all I get is:
    >
    > scandvb -a 0 /usr/share/dvb-apps/dvb-s/Astra-19.2E
    >
    > scanning /usr/share/dvb-apps/dvb-s/Astra-19.2E
    > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
    > initial transponder 12551500 V 22000000 5
    >
    >  >>> tune to: 12551:v:0:22000
    >
    > WARNING: filter timeout pid 0x0011
    > WARNING: filter timeout pid 0x0000
    > WARNING: filter timeout pid 0x0010it's going on
    >
    > dumping lists (0 services)
    >
    > Done.
    >
    >
    > * DVBWorld 2005 *
    >
    > The other is the DVBWorld DVB-S2 2005. I have tried also latest V4l,
    > liplianin branch... and I get the same: 0 services.
    >
    >
    > The hardware were I'm trying to run this is a Dell 1 unit Rack
    Server
    > with RHEL with kernels 2.6.30, 2.6.31 and 2.6.32 patched by myself.
    >
    > As I said I have another computer with a PCI dvb-s card that can
    get lot
    > of channels so I thing that the disk is working well.
    >
    >
    > Any idea about what's going on?
    Hi Guillem,
    I think you are missing firmwares, though you give too little
    information.

    >
    > Thanks in advance,
    >
    > Guillem Solà
    > --
    > To unsubscribe from this list: send the line "unsubscribe
    linux-media" in
    > the body of a message to majord...@vger.kernel.org
    <mailto:majord...@vger.kernel.org>
    > More majordomo info at  http://vger.kernel.org/majordomo-info.html

    --
    Igor M. Liplianin
    Microsoft Windows Free Zone - Linux used for all Computing Tasks


Hi,

I have been testing my TeviiS470 against the saa7164 and basically what I get is that the signal and s/n ratio is lower tuning from the same dish with TeviiS470.

For example tuning the same channel on each one and comparing the femon output:

On saa7164 AragonTv from Astra works well

FE: ST STV0299 DVB-S (SAT)
status 1f | signal e600 | snr edba | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal e4c0 | snr ed84 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal e73e | snr ed5a | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal e607 | snr ed0c | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal e608 | snr ee02 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal e607 | snr edf3 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

On TeviiS470 the same channel have some problems :

FE: Montage Technology DS3000/TS2020 (SAT)
status 1f | signal 9088 | snr 51e0 | ber 00000000 | unc 00001010 | FE_HAS_LOCK status 1f | signal 9088 | snr 51e0 | ber 00003f67 | unc 00005669 | FE_HAS_LOCK status 1f | signal 9088 | snr 51e0 | ber 0000400e | unc 000056ed | FE_HAS_LOCK
status 00 | signal 9088 | snr 51e0 | ber 00003f84 | unc 000056ec |
status 1f | signal 9088 | snr 51e0 | ber 00003ebb | unc 000056cb | FE_HAS_LOCK status 1f | signal 9088 | snr 51e0 | ber 00004057 | unc 00005507 | FE_HAS_LOCK status 1f | signal 9088 | snr 51e0 | ber 00004083 | unc 000056d1 | FE_HAS_LOCK status 1f | signal 9088 | snr 51e0 | ber 00003e63 | unc 000056bc | FE_HAS_LOCK status 1f | signal 9088 | snr 51e0 | ber 00003fe9 | unc 000056be | FE_HAS_LOCK



Here femon output of a channel that works better than the last one

FE: Montage Technology DS3000/TS2020 (SAT)
status 1f | signal 9088 | snr 7ad0 | ber 000002dc | unc 00000000 | FE_HAS_LOCK status 1f | signal 9088 | snr 7ad0 | ber 0000024a | unc 00000000 | FE_HAS_LOCK status 1f | signal 9088 | snr 8f48 | ber 00000262 | unc 00000000 | FE_HAS_LOCK status 1f | signal 9088 | snr 8f48 | ber 00000314 | unc 00000000 | FE_HAS_LOCK status 1f | signal 9088 | snr 8f48 | ber 000002db | unc 00000000 | FE_HAS_LOCK status 1f | signal 9088 | snr 8f48 | ber 000002ed | unc 00000000 | FE_HAS_LOCK status 1f | signal 9088 | snr 8f48 | ber 000003a3 | unc 00000000 | FE_HAS_LOCK

FE: ST STV0299 DVB-S (SAT)
status 1f | signal eafb | snr e835 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ec38 | snr e820 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal eafe | snr e7c9 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal eafd | snr e7d2 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal e9c2 | snr e7d8 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ec39 | snr e7d8 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal eaf4 | snr e7e4 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal eaf3 | snr e7b7 | ber 00000000 | unc 00000000 | FE_HAS_LOCK


Basically that's what happens on all the channels I tried, the signal strength and s/n ratio is lower with TeviiS470 than with saa7164.

regards,

Guillem
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to