From: Philipp Zabel <p.za...@pengutronix.de>
To allow optional interrupt support, we want to configure the pin settings
dynamically. Move those register accesses out of the static initialization
tables.
Signed-off-by: Philipp Zabel <p.za...@pengutronix.de>
[m.fel...@pengutronix.de: drop init_default register remove]
[m.fel...@pengutronix.de: fix regmap access during reset()]
Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
---
drivers/media/i2c/tvp5150.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 284694c21556..c66a962d873a 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -438,9 +438,7 @@ static const struct i2c_reg_value tvp5150_init_default[] = {
/* Default values as sugested at TVP5150AM1 datasheet */
static const struct i2c_reg_value tvp5150_init_enable[] = {
- {
- TVP5150_CONF_SHARED_PIN, 2
- }, { /* Automatic offset and AGC enabled */
+ { /* Automatic offset and AGC enabled */
TVP5150_ANAL_CHL_CTL, 0x15
}, { /* Activate YCrCb output 0x9 or 0xd ? */
TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |
@@ -796,9 +794,15 @@ static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
{
+ struct tvp5150 *decoder = to_tvp5150(sd);
+ struct regmap *map = decoder->regmap;
+
/* Initializes TVP5150 to its default values */
tvp5150_write_inittab(sd, tvp5150_init_default);
+ /* Configure pins: FID, VSYNC, GPCL/VBLK, SCLK */
+ regmap_write(map, TVP5150_CONF_SHARED_PIN, 0x2);
+
/* Initializes VDP registers */
tvp5150_vdp_init(sd);
--
2.17.1
