On 28/08/18 12:26, Philippe De Muyter wrote:
> Hi Hans,
>
> On Tue, Aug 28, 2018 at 12:03:25PM +0200, Hans Verkuil wrote:
>> Hi Philippe,
>>
>> On 28/08/18 09:55, Philippe De Muyter wrote:
>>> add max_interval and step_interval to struct
>>> v4l2_subdev_frame_interval_enum.
>>
>> Yeah, I never understood why this wasn't supported when this API was
>> designed.
>> Clearly an oversight.
>>
>>>
>>> When filled correctly by the sensor driver, those fields must be
>>> used as follows by the intermediate level :
>>>
>>> struct v4l2_frmivalenum *fival;
>>> struct v4l2_subdev_frame_interval_enum fie;
>>>
>>> if (fie.max_interval.numerator == 0) {
>>> fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
>>> fival->discrete = fie.interval;
>>> } else if (fie.step_interval.numerator == 0) {
>>> fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
>>> fival->stepwise.min = fie.interval;
>>> fival->stepwise.max = fie.max_interval;
>>> } else {
>>> fival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
>>> fival->stepwise.min = fie.interval;
>>> fival->stepwise.max = fie.max_interval;
>>> fival->stepwise.step = fie.step_interval;
>>> }
>>
>> This is a bit too magical for my tastes. I'd add a type field:
>>
>> #define V4L2_SUBDEV_FRMIVAL_TYPE_DISCRETE 0
>> #define V4L2_SUBDEV_FRMIVAL_TYPE_CONTINUOUS 1
>> #define V4L2_SUBDEV_FRMIVAL_TYPE_STEPWISE 2
>
> Like that ?
>
> struct v4l2_subdev_frame_interval_enum {
> __u32 index;
> __u32 pad;
> __u32 code;
> __u32 width;
> __u32 height;
> struct v4l2_fract interval;
> __u32 which;
> __u32 type;
> struct v4l2_fract max_interval;
> struct v4l2_fract step_interval;
> __u32 reserved[3];
> };
Yes.
>
>
>>
>> Older applications that do not know about the type field will just
>> see a single discrete interval containing the minimum interval.
>> I guess that's OK as they will keep working.
>
> That's actually what also happens with the above implementation, because
> max_interval.numerator and step_interval.numerator were previously
> reserved and thus 0, and if this code is moved to a helper function,
> that does not matter if it's a little bit magical :).
It's not just the kernel, but userspace can also enumerate directly from
a v4l-subdevX device node, and they can't use any kernel helper functions.
Let's keep this API clean.
> Both implementations are equal to me, but the proposed one uses less
> space from the 'reserved' field.
That's OK.
Regards,
Hans
>
>>
>> While at it: it would be really nice if you can also add stepwise
>> support to VIDIOC_SUBDEV_ENUM_FRAME_SIZE. I think the only thing
>> you need to do there is to add two new fields: step_width and step_height.
>> If 0, then that just means a step size of 1.
>
> I'll look at that if I find enough interest and test opportunity for it,
> but those things are unrelated except that they are missing :)
>
>>
>> Add some helper functions to translate between
>> v4l2_subdev_frame_size/interval_enum
>> and v4l2_frmsize/ivalenum and this becomes much cleaner.
>
> OK
>
>>
>> Regards,
>>
>> Hans
>>
>>>
>>> Signed-off-by: Philippe De Muyter <[email protected]>
>>> ---
>>> .../uapi/v4l/vidioc-subdev-enum-frame-interval.rst | 39
>>> +++++++++++++++++++++-
>>> include/uapi/linux/v4l2-subdev.h | 4 ++-
>>> 2 files changed, 41 insertions(+), 2 deletions(-)
>>>
>>> diff --git
>>> a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst
>>> b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst
>>> index 1bfe386..acc516e 100644
>>> --- a/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst
>>> +++ b/Documentation/media/uapi/v4l/vidioc-subdev-enum-frame-interval.rst
>>> @@ -51,6 +51,37 @@ EINVAL error code if one of the input fields is invalid.
>>> All frame
>>> intervals are enumerable by beginning at index zero and incrementing by
>>> one until ``EINVAL`` is returned.
>>>
>>> +If the sub-device can work only at the fixed set of frame intervals,
>>> +driver must enumerate them with increasing indexes, by only filling
>>> +the ``interval`` field. If the sub-device can work with a continuous
>>> +range of frame intervals, driver must only return success for index 0
>>> +and fill ``interval`` with the minimum interval, ``max_interval`` with
>>> +the maximum interval, and ``step_interval`` with 0 or the step between
>>> +the possible intervals.
>>> +
>>> +Callers are expected to use the returned information as follows :
>>> +
>>> +.. code-block:: c
>>> +
>>> + struct v4l2_frmivalenum * fival;
>>> + struct v4l2_subdev_frame_interval_enum fie;
>>> +
>>> + if (fie.max_interval.numerator == 0) {
>>> + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
>>> + fival->discrete = fie.interval;
>>> + } else if (fie.step_interval.numerator == 0) {
>>> + fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
>>> + fival->stepwise.min = fie.interval;
>>> + fival->stepwise.max = fie.max_interval;
>>> + } else {
>>> + fival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
>>> + fival->stepwise.min = fie.interval;
>>> + fival->stepwise.max = fie.max_interval;
>>> + fival->stepwise.step = fie.step_interval;
>>> + }
>>> +
>>> +.. code-block:: c
>>> +
>>> Available frame intervals may depend on the current 'try' formats at
>>> other pads of the sub-device, as well as on the current active links.
>>> See :ref:`VIDIOC_SUBDEV_G_FMT` for more
>>> @@ -92,8 +123,14 @@ multiple pads of the same sub-device is not defined.
>>> - ``which``
>>> - Frame intervals to be enumerated, from enum
>>> :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
>>> + * - struct :c:type:`v4l2_fract`
>>> + - ``max_interval``
>>> + - Maximum period, in seconds, between consecutive video frames, or 0.
>>> + * - struct :c:type:`v4l2_fract`
>>> + - ``step_interval``
>>> + - Frame interval step size, in seconds, or 0.
>>> * - __u32
>>> - - ``reserved``\ [8]
>>> + - ``reserved``\ [4]
>>> - Reserved for future extensions. Applications and drivers must set
>>> the array to zero.
>>>
>>> diff --git a/include/uapi/linux/v4l2-subdev.h
>>> b/include/uapi/linux/v4l2-subdev.h
>>> index 03970ce..c944644 100644
>>> --- a/include/uapi/linux/v4l2-subdev.h
>>> +++ b/include/uapi/linux/v4l2-subdev.h
>>> @@ -128,7 +128,9 @@ struct v4l2_subdev_frame_interval_enum {
>>> __u32 height;
>>> struct v4l2_fract interval;
>>> __u32 which;
>>> - __u32 reserved[8];
>>> + struct v4l2_fract max_interval;
>>> + struct v4l2_fract step_interval;
>>> + __u32 reserved[4];
>>> };
>>>
>>> /**
>>>
>
