This will allow us to restore the last set format after the device returns from a power off.
Signed-off-by: Lubomir Rintel <[email protected]> --- Changes since v2: - This patch was added to the series drivers/media/i2c/ov7670.c | 80 ++++++++++++++++++++++---------------- 1 file changed, 46 insertions(+), 34 deletions(-) diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c index bc68a3a5b4ec..ee2302fbdeee 100644 --- a/drivers/media/i2c/ov7670.c +++ b/drivers/media/i2c/ov7670.c @@ -240,6 +240,7 @@ struct ov7670_info { }; struct v4l2_mbus_framefmt format; struct ov7670_format_struct *fmt; /* Current format */ + struct ov7670_win_size *wsize; struct clk *clk; struct gpio_desc *resetb_gpio; struct gpio_desc *pwdn_gpio; @@ -1003,48 +1004,20 @@ static int ov7670_try_fmt_internal(struct v4l2_subdev *sd, return 0; } -/* - * Set a format. - */ -static int ov7670_set_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_pad_config *cfg, - struct v4l2_subdev_format *format) +static int ov7670_apply_fmt(struct v4l2_subdev *sd) { - struct ov7670_format_struct *ovfmt; - struct ov7670_win_size *wsize; struct ov7670_info *info = to_state(sd); -#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API - struct v4l2_mbus_framefmt *mbus_fmt; -#endif + struct ov7670_win_size *wsize = info->wsize; unsigned char com7, com10 = 0; int ret; - if (format->pad) - return -EINVAL; - - if (format->which == V4L2_SUBDEV_FORMAT_TRY) { - ret = ov7670_try_fmt_internal(sd, &format->format, NULL, NULL); - if (ret) - return ret; -#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API - mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad); - *mbus_fmt = format->format; - return 0; -#else - return -ENOTTY; -#endif - } - - ret = ov7670_try_fmt_internal(sd, &format->format, &ovfmt, &wsize); - if (ret) - return ret; /* * COM7 is a pain in the ass, it doesn't like to be read then * quickly written afterward. But we have everything we need * to set it absolutely here, as long as the format-specific * register sets list it first. */ - com7 = ovfmt->regs[0].value; + com7 = info->fmt->regs[0].value; com7 |= wsize->com7_bit; ret = ov7670_write(sd, REG_COM7, com7); if (ret) @@ -1066,7 +1039,7 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd, /* * Now write the rest of the array. Also store start/stops */ - ret = ov7670_write_array(sd, ovfmt->regs + 1); + ret = ov7670_write_array(sd, info->fmt->regs + 1); if (ret) return ret; @@ -1081,8 +1054,6 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd, return ret; } - info->fmt = ovfmt; - /* * If we're running RGB565, we must rewrite clkrc after setting * the other parameters or the image looks poor. If we're *not* @@ -1100,6 +1071,46 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd, return 0; } +/* + * Set a format. + */ +static int ov7670_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct ov7670_info *info = to_state(sd); +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API + struct v4l2_mbus_framefmt *mbus_fmt; +#endif + int ret; + + if (format->pad) + return -EINVAL; + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + ret = ov7670_try_fmt_internal(sd, &format->format, NULL, NULL); + if (ret) + return ret; +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API + mbus_fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad); + *mbus_fmt = format->format; + return 0; +#else + return -ENOTTY; +#endif + } + + ret = ov7670_try_fmt_internal(sd, &format->format, &info->fmt, &info->wsize); + if (ret) + return ret; + + ret = ov7670_apply_fmt(sd); + if (ret) + return ret; + + return 0; +} + static int ov7670_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, struct v4l2_subdev_format *format) @@ -1847,6 +1858,7 @@ static int ov7670_probe(struct i2c_client *client, info->devtype = &ov7670_devdata[id->driver_data]; info->fmt = &ov7670_formats[0]; + info->wsize = &info->devtype->win_sizes[0]; ov7670_get_default_format(sd, &info->format); -- 2.19.1
