remove t230 from cxusb (for linux >= 5.3)
Signed-off-by: Jan Pieter van Woerkom <j...@jpvw.nl> --- diff -ru a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c --- a/drivers/media/usb/dvb-usb/cxusb.c 2019-08-11 22:26:41.000000000 +0200 +++ b/drivers/media/usb/dvb-usb/cxusb.c 2019-08-13 03:13:48.496221952 +0200 @@ -78,7 +78,6 @@ DVICO_BLUEBIRD_DUAL_4_REV_2, CONEXANT_D680_DMB, MYGICA_D689, - MYGICA_T230, NR__cxusb_table_index }; @@ -456,26 +455,6 @@ return 0; } -static int cxusb_read_status(struct dvb_frontend *fe, - enum fe_status *status) -{ - struct dvb_usb_adapter *adap = (struct dvb_usb_adapter *)fe->dvb->priv; - struct cxusb_state *state = (struct cxusb_state *)adap->dev->priv; - int ret; - - ret = state->fe_read_status(fe, status); - - /* it need resync slave fifo when signal change from unlock to lock.*/ - if ((*status & FE_HAS_LOCK) && (!state->last_lock)) { - mutex_lock(&state->stream_mutex); - cxusb_streaming_ctrl(adap, 1); - mutex_unlock(&state->stream_mutex); - } - - state->last_lock = (*status & FE_HAS_LOCK) ? 1 : 0; - return ret; -} - static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d) { int ep = d->props.generic_bulk_ctrl_endpoint; @@ -1374,86 +1353,6 @@ return 0; } -static int cxusb_mygica_t230_frontend_attach(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - struct cxusb_state *st = d->priv; - struct i2c_adapter *adapter; - struct i2c_client *client_demod; - struct i2c_client *client_tuner; - struct i2c_board_info info; - struct si2168_config si2168_config; - struct si2157_config si2157_config; - - /* Select required USB configuration */ - if (usb_set_interface(d->udev, 0, 0) < 0) - err("set interface failed"); - - /* Unblock all USB pipes */ - usb_clear_halt(d->udev, - usb_sndbulkpipe(d->udev, - d->props.generic_bulk_ctrl_endpoint)); - usb_clear_halt(d->udev, - usb_rcvbulkpipe(d->udev, - d->props.generic_bulk_ctrl_endpoint)); - usb_clear_halt(d->udev, - usb_rcvbulkpipe(d->udev, - d->props.adapter[0].fe[0].stream.endpoint)); - - /* attach frontend */ - si2168_config.i2c_adapter = &adapter; - si2168_config.fe = &adap->fe_adap[0].fe; - si2168_config.ts_mode = SI2168_TS_PARALLEL; - si2168_config.ts_clock_inv = 1; - memset(&info, 0, sizeof(struct i2c_board_info)); - strscpy(info.type, "si2168", I2C_NAME_SIZE); - info.addr = 0x64; - info.platform_data = &si2168_config; - request_module(info.type); - client_demod = i2c_new_device(&d->i2c_adap, &info); - if (!client_demod || !client_demod->dev.driver) - return -ENODEV; - - if (!try_module_get(client_demod->dev.driver->owner)) { - i2c_unregister_device(client_demod); - return -ENODEV; - } - - st->i2c_client_demod = client_demod; - - /* attach tuner */ - memset(&si2157_config, 0, sizeof(si2157_config)); - si2157_config.fe = adap->fe_adap[0].fe; - si2157_config.if_port = 1; - memset(&info, 0, sizeof(struct i2c_board_info)); - strscpy(info.type, "si2157", I2C_NAME_SIZE); - info.addr = 0x60; - info.platform_data = &si2157_config; - request_module(info.type); - client_tuner = i2c_new_device(adapter, &info); - if (!client_tuner || !client_tuner->dev.driver) { - module_put(client_demod->dev.driver->owner); - i2c_unregister_device(client_demod); - return -ENODEV; - } - if (!try_module_get(client_tuner->dev.driver->owner)) { - i2c_unregister_device(client_tuner); - module_put(client_demod->dev.driver->owner); - i2c_unregister_device(client_demod); - return -ENODEV; - } - - st->i2c_client_tuner = client_tuner; - - /* hook fe: need to resync the slave fifo when signal locks. */ - mutex_init(&st->stream_mutex); - st->last_lock = 0; - st->fe_read_status = adap->fe_adap[0].fe->ops.read_status; - adap->fe_adap[0].fe->ops.read_status = cxusb_read_status; - - return 0; -} - /* * DViCO has shipped two devices with the same USB ID, but only one of them * needs a firmware download. Check the device class details to see if they @@ -1633,7 +1532,6 @@ static struct dvb_usb_device_properties cxusb_aver_a868r_properties; static struct dvb_usb_device_properties cxusb_d680_dmb_properties; static struct dvb_usb_device_properties cxusb_mygica_d689_properties; -static struct dvb_usb_device_properties cxusb_mygica_t230_properties; static int cxusb_medion_priv_init(struct dvb_usb_device *dvbdev) { @@ -1759,8 +1657,6 @@ THIS_MODULE, NULL, adapter_nr) || !dvb_usb_device_init(intf, &cxusb_mygica_d689_properties, THIS_MODULE, NULL, adapter_nr) || - !dvb_usb_device_init(intf, &cxusb_mygica_t230_properties, - THIS_MODULE, NULL, adapter_nr) || 0) return 0; @@ -1862,9 +1758,6 @@ [MYGICA_D689] = { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) }, - [MYGICA_T230] = { - USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230) - }, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, cxusb_table); @@ -2534,60 +2427,6 @@ }, } }; - -static struct dvb_usb_device_properties cxusb_mygica_t230_properties = { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = CYPRESS_FX2, - - .size_of_priv = sizeof(struct cxusb_state), - - .num_adapters = 1, - .adapter = { - { - .num_frontends = 1, - .fe = {{ - .streaming_ctrl = cxusb_streaming_ctrl, - .frontend_attach = cxusb_mygica_t230_frontend_attach, - - /* parameter for the MPEG2-data transfer */ - .stream = { - .type = USB_BULK, - .count = 5, - .endpoint = 0x02, - .u = { - .bulk = { - .buffersize = 8192, - } - } - }, - } }, - }, - }, - - .power_ctrl = cxusb_d680_dmb_power_ctrl, - - .i2c_algo = &cxusb_i2c_algo, - - .generic_bulk_ctrl_endpoint = 0x01, - - .rc.core = { - .rc_interval = 100, - .rc_codes = RC_MAP_D680_DMB, - .module_name = KBUILD_MODNAME, - .rc_query = cxusb_d680_dmb_rc_query, - .allowed_protos = RC_PROTO_BIT_UNKNOWN, - }, - - .num_device_descs = 1, - .devices = { - { - "Mygica T230 DVB-T/T2/C", - { NULL }, - { &cxusb_table[MYGICA_T230], NULL }, - }, - } -}; static struct usb_driver cxusb_driver = { .name = "dvb_usb_cxusb",