Le jeudi 26 septembre 2019 à 19:21 +0900, Tomasz Figa a écrit : > On Mon, Sep 23, 2019 at 11:13 PM Hans Verkuil <hverk...@xs4all.nl> wrote: > > Hi all, > > > > Since we have three separate half-day sessions for different topics I > > decided > > to split the announcement for this in three emails as well, so these things > > can be discussed in separate threads. > > > > All sessions are in room Terreaux VIP Lounge - Level 0. > > There is a maximum of 15 people. > > > > The first session deals with the codec API and is on Tuesday morning from > > 8:30 (tentative, might change) to 12:00 (we have to vacate the room at that > > time). > > > > Confirmed attendees for this session: > > > > Boris Brezillon <boris.brezil...@collabora.com> > > Alexandre Courbot <acour...@chromium.org> > > Nicolas Dufresne <nico...@ndufresne.ca> > > Tomasz Figa <tf...@chromium.org> > > Ezequiel Garcia <ezequ...@collabora.com> > > Daniel Gomez <dan...@qtec.com> > > Dafna Hirschfeld <dafna.hirschf...@collabora.com> > > Eugen Hristev <eugen.hris...@microchip.com> > > Paul Kocialkowski <paul.kocialkow...@bootlin.com> > > Helen Koike <helen.ko...@collabora.com> > > Michael Tretter <m.tret...@pengutronix.de> > > Hans Verkuil <hverk...@xs4all.nl> > > > > Tentative: > > > > Laurent Pinchart <laurent.pinch...@ideasonboard.com> > > Jacopo Mondi <jac...@jmondi.org> > > > > Jacopo, please confirm if you want to attend this session. I didn't find > > an email with explicit confirmation, so it was probably done via irc. But > > since > > this session is getting close to capacity I would prefer to keep attendance > > to > > those are actually working with codecs (or will work with it in the near > > future). > > > > If I missed someone, or you are on the list but won't attend after all, then > > please let me know. > > > > > > > > Agenda: > > > > - Status of any pending patches related to codec support. > > > > - Requirements of moving codec drivers out of staging. > > > > - Finalize the stateful encoder API. There are two pieces that need > > to be defined: > > > > 1) Setting the frame rate so bitrate control can make sense, since > > they need to know this information. This is also relevant for the > > stateless codec (and this may have to change on a per-frame basis > > for stateless codecs!). > > > > This can either be implemented via ENUM_FRAMEINTERVALS for the coded > > pixelformats and S_PARM support, or we just add a new control for this. > > E.g. V4L2_CID_MPEG_VIDEO_FRAME_INTERVAL (or perhaps FRAME_RATE). If we > > go for a control, then we need to consider the unit. We can use a > > fraction as well. See this series that puts in the foundation for that: > > https://patchwork.linuxtv.org/cover/58857/ > > > > I am inclined to go with a control, since the semantics don't really > > match ENUM_FRAMEINTERVALS/S_PARM. These ioctls still need to be supported > > for legacy drivers. Open question: some drivers (mediatek, hva, coda) > > require S_PARM(OUTPUT), some (venus) allow both S_PARM(CAPTURE) and > > S_PARM(OUTPUT). I am inclined to allow both since this is not a CAPTURE > > vs OUTPUT thing, it is global to both queues. > > > > 2) Interactions between OUTPUT and CAPTURE formats. > > > > The main problem is what to do if the capture sizeimage is too small > > for the OUTPUT resolution when streaming starts. > > > > Proposal: width and height of S_FMT(OUTPUT) are used to > > calculate a minimum sizeimage (app may request more). This is > > driver-specific. (Is it? Or is this codec-specific?) > > > > V4L2_FMT_FLAG_FIXED_RESOLUTION is always set for codec formats > > for the encoder (i.e. we don't support mid-stream resolution > > changes for now) and V4L2_EVENT_SOURCE_CHANGE is not > > supported. See https://patchwork.linuxtv.org/patch/56478/ for > > the patch adding this flag. > > > > Of course, if we start to support mid-stream resolution > > changes (or other changes that require a source change event), > > then this flag should be dropped by the encoder driver and > > documentation on how to handle the source change event should > > be documented in the encoder spec. I prefer to postpone this > > until we have an encoder than can actually do mid-stream > > resolution changes. > > > > If sizeimage of the OUTPUT is too small for the CAPTURE > > resolution and V4L2_EVENT_SOURCE_CHANGE is not supported, > > then the second STREAMON (either CAPTURE or OUTPUT) will > > return -ENOMEM since there is not enough memory to do the > > encode. > > > > If V4L2_FMT_FLAG_FIXED_RESOLUTION is set (i.e. that should > > be the case for all current encoders), then any bitrate controls > > will be limited in range to what the current state (CAPTURE and > > OUTPUT formats and frame rate) supports. > > > > - Stateless encoders? > > This could indeed be a good topic. The hantro driver currently only > supports JPEG encoding, but the hardware also supports H.264 and VP8 > at least. It, however, handles only the core parts of the encoding, > i.e. generating the actual encoded frames (slices) without headers. It > also doesn't do any bitrate control or scene change detection on its > own and expects quality parameters (QP) or keyframe requests to come > from the software. > > I'm not sure if there is any other hardware with similar constraints > that could use V4L2, but I believe the Intel video encoder supported > by VAAPI has a similar design.
The bitrate adaption is mostly done inside the VAAPI driver on Intel side, software of shaders (could also be in HW for other drivers, not sure if it's different with VDBox, which is real HW, also advertised as the Iris Low Power CODCE). Users of VAAPI will setup certain parameter in a structure called VAEncMiscParameterRateControl, but there is no per-frame or per-slice work from what I can see. Though, the encoded bits are similar, they come pretty raw, no sps/pps/sei or anything, and no slice headers at all. This all being generated in gstreamer-vaapi, and I suppose it's the same in FFMPEG or Chromium ? > > Best regards, > Tomasz > > > - Anything else? (I have a feeling I missed a codec-related topic, but > > I can't find it in my mailbox) > > > > Regards, > > > > Hans
signature.asc
Description: This is a digitally signed message part