signed-off-by: Stefan Ringel <[email protected]>
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -221,12 +239,13 @@ struct usb_device_id tm6000_id_table [] = {
{ USB_DEVICE(0x2040, 0x6600), .driver_info =
TM6010_BOARD_HAUPPAUGE_900H },
{ USB_DEVICE(0x6000, 0xdec0), .driver_info =
TM6010_BOARD_BEHOLD_WANDER },
{ USB_DEVICE(0x6000, 0xdec1), .driver_info =
TM6010_BOARD_BEHOLD_VOYAGER },
{ USB_DEVICE(0x0ccd, 0x0086), .driver_info =
TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
{ },
};
/* Tuner callback to provide the proper gpio changes needed for xc2028 */
-static int tm6000_tuner_callback(void *ptr, int component, int command,
int arg)
+int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
{
int rc=0;
struct tm6000_core *dev = ptr;
@@ -252,11 +271,14 @@ static int tm6000_tuner_callback(void *ptr, int
component, int command, int arg)
switch (arg) {
case 0:
tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
+ dev->tuner_reset_gpio, 0x01);
+ msleep(60);
+ tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
dev->tuner_reset_gpio, 0x00);
- msleep(130);
+ msleep(75);
tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
dev->tuner_reset_gpio, 0x01);
- msleep(130);
+ msleep(60);
break;
case 1:
tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT,
@@ -290,7 +332,7 @@ static void tm6000_config_tuner (struct tm6000_core
*dev)
memset(&tun_setup, 0, sizeof(tun_setup));
tun_setup.type = dev->tuner_type;
tun_setup.addr = dev->tuner_addr;
- tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
+ tun_setup.mode_mask = T_ANALOG_TV | T_RADIO | T_DIGITAL_TV;
tun_setup.tuner_callback = tm6000_tuner_callback;
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr,
&tun_setup);
@@ -302,15 +344,19 @@ static void tm6000_config_tuner (struct
tm6000_core *dev)
memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
memset (&ctl,0,sizeof(ctl));
- ctl.mts = 1;
- ctl.read_not_reliable = 1;
+ ctl.input1 = 1;
+ ctl.read_not_reliable = 0;
ctl.msleep = 10;
-
+ ctl.demod = XC3028_FE_ZARLINK456;
+ ctl.vhfbw7 = 1;
+ ctl.uhfbw8 = 1;
+ ctl.switch_mode = 1;
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
switch(dev->model) {
case TM6010_BOARD_HAUPPAUGE_900H:
+ case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
ctl.fname = "xc3028L-v36.fw";
break;
default:
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
