On 1/17/26 06:06, Richard Acayan wrote:
The Sony IMX355 is the front camera on the Pixel 3a, mounted in portrait
mode. It is connected to CSIPHY1 and CCI I2C1, and uses MCLK2. Add
support for it.
Co-developed-by: Robert Mader <[email protected]>
Signed-off-by: Robert Mader <[email protected]>
Signed-off-by: Richard Acayan <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
---
.../boot/dts/qcom/sdm670-google-sargo.dts | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
index ed55646ca419..e925cba0381f 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -172,6 +172,34 @@ vreg_s2b_1p05: vreg-s2b-regulator {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
+
+ cam_front_ldo: cam-front-ldo-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_front_ldo";
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-enable-ramp-delay = <135>;
+
+ gpios = <&pm660l_gpios 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&cam_front_ldo_pin>;
+ pinctrl-names = "default";
+ };
+
+ cam_vio_ldo: cam-vio-ldo-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_vio_ldo";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <233>;
+
+ gpios = <&pm660_gpios 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&cam_vio_pin>;
+ pinctrl-names = "default";
+ };
};
&apps_rsc {
@@ -392,6 +420,59 @@ vreg_bob: bob {
};
};
+&camss {
+ vdda-phy-supply = <&vreg_l1a_1p225>;
+ vdda-pll-supply = <&vreg_s6a_0p87>;
+
+ status = "okay";
+};
+
+&camss_port1 {
+ camss_endpoint1: endpoint {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&cam_front_endpoint>;
+ };
+};
Looks acceptable.
+
+&cci {
+ pinctrl-0 = <&cci1_default>;
+ pinctrl-1 = <&cci1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&cci_i2c1 {
+ camera@1a {
+ compatible = "sony,imx355";
+ reg = <0x1a>;
+
+ clocks = <&camcc CAM_CC_MCLK2_CLK>;
+
+ assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+
+ avdd-supply = <&cam_front_ldo>;
+ dvdd-supply = <&cam_front_ldo>;
+ dovdd-supply = <&cam_vio_ldo>;
+
+ pinctrl-0 = <&cam_mclk2_default>;
+ pinctrl-names = "default";
+
+ rotation = <270>;
+ orientation = <0>;
+
+ port {
+ cam_front_endpoint: endpoint {
+ link-frequencies = /bits/ 64 <360000000>;
+ remote-endpoint = <&camss_endpoint1>;
+ };
+ };
+ };
+};
+
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -490,6 +571,14 @@ &pm660_charger {
status = "okay";
};
+&pm660_gpios {
+ cam_vio_pin: cam-vio-state {
+ pins = "gpio13";
+ function = "normal";
+ power-source = <0>;
+ };
+};
+
&pm660_rradc {
status = "okay";
};
@@ -508,6 +597,12 @@ led-0 {
};
&pm660l_gpios {
+ cam_front_ldo_pin: cam-front-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <0>;
+ };
+
vol_up_pin: vol-up-state {
pins = "gpio7";
function = "normal";
Reviewed-by: Vladimir Zapolskiy <[email protected]>
--
Best wishes,
Vladimir
